Subject: High Beams and water on the floor Author: 740iluv : member since August, 2008 : 5 posts Posted on: 2010-08-30 00:23:57

I just bought a 06 325xi. Great car. First the water. I know the windshield was replaced by a shop that did a lousy job, glue everywhere. Went through the car wash and the wife’s feet got wet. I knew it wasn't the moon roof (had that problem with my 740) pulled the wipers off and the black plastic cover that is under them, it rests against the lower part of the windshield. As I looked in it looks like a cove is missing. I can see the squirrel cage from the heater/ac fan. Waster runs down the windshield and into the squirrel cage and out the duct onto the passenger floor. I think there is a cove the glass shop must not have put back.

My headlights work but when I hit the brights the blue bear paw comes on on the dash, fog lights go off like they’re supposed to but the H-beams don’t come on. I checked to see if I had voltage at the socket that plugs on the bulb and nothing. I also did a continuity test on the bulb and it looks good.

Can anybody help me with this? Thanks

• High Beams and water on the floor - 740iluv 2010-08-30 00:23:57 (615 views)
  • Re: High Beams and water on the floor - 740iluv 2010-09-04 02:06:57 (897 views)