Home | BimmerBoard on AMAZON | X5 E53 Forum | Post New Message | Search | Contact Moderator | Sign In  












Click to make a donation to support BimmerBoard
Follow BimmerBoard
Click to follow us on Twitter Click to follow us on FaceBook Click to follow us on MySpace
Related Links
BMW CCA
Indy Mechanics
E38.org Wiki
David's BMW Bookstore
BimmerBoard on AMAZON
Specialty Forums
Deals & Offers
IBUS Forum
Garage Forum
Navigation A/V
Bluetooth
For Sale
Want To Buy
Off-Topic
Detailing
///M
Kill Stories
Group Buys
Vanos Forum
Meet & Greet
TEST FORUM

Forums for Current Model BMW's
1 Series E81
3 Series E90
5 Series E60
5 Series F10 NEW
6 Series E63/E64
7 Series E65/E66
7 Series F01/02 NEW
X3 E83
X5 E70
X6 E71
Z4 E85
MINI Cooper

Forums for Past Model BMW's
2002
3 Series E21
3 Series E30
3 Series E36
3 Series E46
5 Series E12
5 Series E28
5 Series E34
5 Series E39
6 Series E24
7 Series E23
7 Series E32
7 Series E38
8 Series E31
X5 E53
Z3
Z8 E52
CS E9
Senior Six E3

Model-specific Lounges
E32 Lounge
E36 Lounge
E38 Lounge
E46 Lounge

Regional Forums
Australia
Canada
United Kingdom
Netherlands

Forums for Local BMW Car Clubs
Dallas
Southern California
Minneapolis
Atlanta


Click here to advertise on BimmerBoard.com









Return to the forum index X5 E53 Forum

Visit the BimmerBoard Store on Amazon.com!

Subject: Re: detailed instructions to program bmw keys
Author: jeet420 : member since March, 2010 : 3 posts
Posted on: 2010-03-04 22:31:09      
Bookmark and Share

Three methods to try:


Method 1:
1. Working from within the vehicle and with the doors shut
2. Turn ignition to position 1 and back to off within 5 seconds.
3. Remove the key from ignition and press and hold the unlock button for 15 seconds during this time press the key lock button 3 times within 5 seconds.
4. Release both buttons.
5. Doors will lock and unlock to show correct programming has occurred.

Method 2:
To do this procedure you need to have one working key and one key that needs to be programmed.
1) Get in and close all doors.
2) Turn on the ignition and turn off quickly. (No more than 5 seconds) to start the process. Next action must take place within 30 seconds.
3) Remove the 1st key.
4) Hold the key up near your left shoulder (this is so it is closer to the remote receiver antenna.
5) Hold down the unlock button and press the lock button 3 times. Release the unlock button and the doors lock which confirms the operation.
6) Quickly repeat steps 4 & 5 for key #2 etc.
If it does not work, try doing the keys in opposite order. Key 2 then key 1, vs 1 then 2.

Method 3:
Alternate if you do not have a working remote
1. Turn key to position 1 five times very quickly 2. Remove key 3. Hold unlock button then press lock button 3 times, release unlock button.
4. If you have another key do the same button pressing within 30 seconds 5. Turn on ignition to finalize.
PLEASE NOTE: This programming procedure programs the remote control part of the key. Any transponder chip for the immobilizer (starting of car) will not be programmed and must be done by a specialist.

I hope this will help



The X5 E53 Forum | Message Thread:


The X5 E53 Forum requires users to register before posting new messages.

Click Here to Sign In / Register


Make a donation to support BimmerBoard


Home | Privacy Policy | Terms of Service | Glossary | Advertising

Questions, comments, problems, please email webmaster@bimmerboard.com

©Copyright 2003-2011 BimmerBoard, LLC, All Rights Reserved.
No content from this web site may be reproduced or copied in any
form without the express written consent of BimmerBoard, LLC.


The BMW name and logos are registered trademarks of BMW AG
and BMW of North America, LLC.