Re: vibration after replacing rotors and pads

Subject: Re: vibration after replacing rotors and pads
Author: cn as CNN-090 : member since July, 2004 : 1088 posts
Posted on: 2009-10-03 21:42:13

If the vibration did NOT exist prior to the Brake Job, then:

- Either dirt gets in between Hub and INNER Side of Wheel (where it mates with the Hub).

- Or Over-tightening of wheel lugs. Did you use a Torque Wrench.
IIRC then it is approx. 110 Nm or so.

CNN-090
1998 BMW 528i 5-speed 103K

The 5 Series E39 Forum | Message Thread:

vibration after replacing rotors and pads - steady3871 2009-10-03 14:29:37 (365 views)
- Re: vibration after replacing rotors and pads - Shayne 2009-10-07 17:46:05 (408 views)
- Re: vibration after replacing rotors and pads - CNN-090 2009-10-03 21:42:13 (457 views)
- Re: vibration after replacing rotors and pads - 540guy 2009-10-03 21:23:50 (320 views)

The 5 Series E39 Forum requires users to register before posting new messages.
Click Here to Sign In / Register

Home | Privacy Policy | Terms of Service | Glossary | Advertising

Questions, comments, problems, please email webmaster@bimmerboard.com

©Copyright 2003-2011 BimmerBoard, LLC, All Rights Reserved.
No content from this web site may be reproduced or copied in any
form without the express written consent of BimmerBoard, LLC.

The BMW name and logos are registered trademarks of BMW AG
and BMW of North America, LLC.