Subject: I hope I found my problem. Author: akasjl : member since September, 2007 : 93 posts Posted on: 2009-03-08 14:20:24

I removed the Old to New Harness today and found the blue w/black stripe wire detached from the 10 pin silver pin plug. (Pics attached.) Now, when I initially installed and subsequently checked the harness when I was having audio issues, this wire was not the case. I am guessing this wire has been loose from day one and eventually came off. I do not know what exactly this particular wire is for or does. If anyone knows for certain, please chime in. However, given that the silver pin is for the audio, it has to be and I am praying that this is my problem. (The other connections on the harness and on the round pin harness seem to be fine.) I am assuming the blue/black stripe wire attaches to the pin just above the wire that is blue w/a white stripe. It seems as if all I need to is slide the blue/black wire onto its designated pin and secure it making certain the wire and pin are properly making a connection.

• DSP and Radio Issues - kenez 2009-03-07 17:41:40 (430 views)
  • I don't think the problem is your radio; it could be your wiring - Brian 2009-03-07 17:46:50 (350 views)
    • Re: I don't think the problem is your radio; it could be your wiring - kenez 2009-03-07 18:37:36 (379 views)
      • Re: I am having the same issue. - akasjl 2009-03-07 21:42:58 (374 views)
        • Re: I am having the same issue. - kenez 2009-03-07 22:08:05 (417 views)
          • I hope I found my problem. (pic) - akasjl 2009-03-08 14:20:24 (438 views)
            • I'm pretty sure that wire is for your nav voice instructions (nt) - Brian 2009-03-08 19:19:09 (329 views)
              • Re: I'm pretty sure that wire is for your nav voice instructions - kenez 2009-03-08 20:24:21 (373 views)
              • I have had no issues with the nav voice. But that written, - akasjl 2009-03-08 20:19:09 (345 views)
                • It is probably not the issue, but you never know - Brian 2009-03-09 17:12:08 (383 views)
                  • I hope it is a freek thing, but - akasjl 2009-03-09 17:27:19 (405 views)
                    • Would like to take a closer look @ iBus wire (no 5) on the - akasjl 2009-03-12 07:52:04 (394 views)
                      • To remove a pin requires a pin extraction tool - kiwijochen 2009-03-12 08:29:00 (526 views)
                        • How do I go about monitoring the data? (nt) - akasjl 2009-03-12 09:38:15 (356 views)
                        • How do I go about monitoring the data? (nt) - akasjl 2009-03-12 09:36:19 (396 views)
                          • I assume with NavCoder. Will it be obvious - akasjl 2009-03-12 10:36:03 (489 views)