Subject: You can wire any generic momentary switch to pin 32 on the ULF plug Author: Brian (moderator) : member since January, 2005 : 10650 posts Posted on: 2009-01-27 11:51:59

The pairing button grounds pin 32 on the ULF plug. So, you could wire any generic momentary switch to pin 32 so that it connects the pin to ground when you push the button. Then, you could locate that switch about any where you want to. Just be sure that you can reach it when you turn on the ignition, so that you can put the car in pairing mode.

• After getting my ULF... - seattlee38 2009-01-13 13:12:44 (630 views)
  • The parts all depend on the year of your car - Martin 2009-01-15 18:45:27 (547 views)
    • Build Date is 6/98, 750iL with 16:9/Mark IV (nt) - seattlee38 2009-01-19 17:27:39 (478 views)
  • Sounds like you need a pairing button, custom DB25-54 cable, - Lyonsden1980 2009-01-15 15:51:33 (718 views)
  • Other key parts... - Brian 2009-01-13 13:26:03 (682 views)
    • Re: Other key parts... - bbmmww 2009-01-25 21:41:15 (452 views)
      • The antenna is PN 84.50-6 928 461 and the cable is 61.12 0 137 616 (nt) - Brian 2009-01-27 11:49:22 (564 views)
        • Re: The antenna is PN 84.50-6 928 461 and the cable is 61.12 0 137 616 - bbmmww 2009-02-24 21:26:25 (589 views)
          • I meant the cable PN 84 32 0 138 217 - bbmmww 2009-02-24 21:32:01 (527 views)
            • Re: I meant the cable PN 84 32 0 138 217 - bbmmww 2009-03-02 18:44:11 (530 views)
              • Great find! (nt) - Brian 2009-03-02 20:55:21 (486 views)
    • Re: Other key parts... - bbmmww 2009-01-25 21:36:42 (451 views)
      • You can wire any generic momentary switch to pin 32 on the ULF plug - Brian 2009-01-27 11:51:59 (475 views)
    • wheres the best place to get the eject box/pairing button/etc ? (nt) - seattlee38 2009-01-13 13:30:47 (603 views)
      • Dealer or www.bimmernav.com (nt) - Brian 2009-01-13 13:44:11 (513 views)