Subject: This WILL Definitely work! Author: bubbajet : member since February, 2004 : 67 posts Posted on: 2008-04-15 16:14:03

Go to www.dwd2.com. I have used this product on several cars. You will have to drill a small hole into the evaporator box, usually on the inside of the car. Then you you insert a spray head supplied and it is connected to the aerosol can of cleaning foam. Foam will fill the evaporator housing and then drip out as liquid from the evaporator drain tube. This will clean the evaporator fins of all the crud that has built up there over the years and kill any mold that has grown in there also. Good luck.

• musty odor from vents - harv3317 2008-04-15 12:33:22 (365 views)
  • I think this is what you need to replace. (url) - Magnum 2008-04-15 23:18:57 (378 views)
  • Fix the cause of the problem, don't mask the odor - sdmike 2008-04-15 21:15:35 (348 views)
  • This won't solve the problem, but it smells nice (pic) (url) - DavidC 2008-04-15 17:09:37 (454 views)
    • Oh snap! Thats the old Ozium! It's awesome. Hard to find. - dwightf 2008-04-15 20:43:26 (364 views)
    • +100 (nt) - manithemoneyman 2008-04-15 19:43:24 (343 views)
  • Check to make sure the drain isn't plugged - sdmike 2008-04-15 16:46:32 (350 views)
  • This WILL Definitely work! - bubbajet 2008-04-15 16:14:03 (377 views)
    • link fixed. (url) - IBHenry 2008-04-15 23:31:40 (417 views)
    • No need to drill hole. Use evaporator temp sensor hole. Just remove sensor and - zapperjoe 2008-04-15 20:47:03 (333 views)
      • Re: No need to drill hole. Use evaporator temp sensor hole. Just remove sensor and - harv3317 2008-04-17 10:54:42 (333 views)
    • Re: This WILL Definitely work! - harv3317 2008-04-15 20:24:21 (347 views)
  • if you live in a more humid climate, you still may not be getting the - kw740il 2008-04-15 13:30:54 (375 views)
    • can someone tell me where the drain holes are for the evaporator (nt) - harv3317 2008-04-15 20:38:55 (355 views)