The IBUS Forum

sticky: Request for donations... (url) - DavidC 2011-12-23 10:23:54 (2311 views)

sticky: How to add a photo to your signature. (url) - DavidC 2009-04-07 01:21:03 (26144 views)

sticky: How to upload and insert photos into messages (pic) (url) - DavidC 2009-02-15 10:02:42 (26487 views)

electronics - bdouglas 2012-01-15 14:46:35 (19 views)

Can't get navcoder to work!! Help please! - amir007 2011-12-10 19:14:59 (154 views)
- Switch to COM1 and make sure your battery is fully charged. (nt) - 740isport 2011-12-14 14:16:40 (115 views)
  - Re: Switch to COM1 and make sure your battery is fully charged. - amir007 2011-12-16 18:12:40 (110 views)
    - Re: Switch to COM1 and make sure your battery is fully charged. - amir007 2011-12-17 16:42:18 (127 views)

I-Bus chip TH3122 - rv8flyboy 2011-08-25 10:11:11 (426 views)
- Re: I-Bus chip TH3122 - robertengels 2011-12-04 22:31:34 (309 views)
  - THANKS!! - rv8flyboy 2011-12-05 17:14:12 (171 views)
    - It is available in a PDIP package, so very easy... (nt) - robertengels 2011-12-05 22:10:21 (164 views)
      - Re: It is available in a PDIP package, so very easy... - rv8flyboy 2011-12-06 09:33:20 (150 views)
        
        Re: It is available in a PDIP package, so very easy... - robertengels 2011-12-06 21:49:55 (143 views)
        
        Re: Should be 'fault' line (nt) - robertengels 2011-12-06 23:40:36 (142 views)
        I did - rv8flyboy 2011-12-06 23:09:04 (150 views)
        
        Notice it is labelled fault/txe - for transmit enabled (nt) - robertengels 2011-12-06 23:52:05 (150 views)
        
        Re: only for the mcp2004 not the mcp2003 (nt) - robertengels 2011-12-06 23:52:50 (165 views)
        
        Check out section 1.3.4, the fault is also triggered on bus contention, - robertengels 2011-12-06 23:50:16 (137 views)
        
        Ah yes but Table 1-2 the 'bus contention' is defined as - rv8flyboy 2011-12-07 11:59:14 (148 views)
        
        Re: Ah yes but Table 1-2 the 'bus contention' is defined as - robertengels 2011-12-07 13:11:33 (158 views)
        
        OK, Truce - rv8flyboy 2011-12-07 22:26:01 (131 views)
        
        Re: OK, Truce - robertengels 2011-12-08 03:05:13 (145 views)
        
        Re: OK, Truce - rv8flyboy 2011-12-08 10:00:40 (120 views)
        
        Re: Ah yes but Table 1-2 the 'bus contention' is defined as - robertengels 2011-12-07 12:59:01 (143 views)
        
        Re: Ah yes but Table 1-2 the 'bus contention' is defined as - robertengels 2011-12-07 13:08:40 (138 views)
        
        Re: Check out section 1.3.4, the fault is also triggered on bus contention, - robertengels 2011-12-07 02:51:10 (155 views)
- Have you tried contacting Melexis (Belgium) directly? (nt) - Johan750 2011-09-18 15:00:31 (226 views)
  - Yes, several times, no reply (nt) - rv8flyboy 2011-12-05 17:12:21 (133 views)
- I'll sell you mine for $100.000.000 :-) - LA-Sean 2011-08-25 15:10:37 (246 views)
  - Re: I'll sell you mine for $100.000.000 :-) - rv8flyboy 2011-08-25 19:47:58 (279 views)
    - $5 a peice????? Good luck! (nt) - LA-Sean 2011-08-26 00:57:05 (243 views)
      - Re: $5 a peice????? Good luck! - rv8flyboy 2011-08-26 08:24:20 (232 views)
        
        Re: $5 a peice????? Good luck! - LA-Sean 2011-08-26 11:17:03 (258 views)
        
        Re: $5 a peice????? Good luck! - rv8flyboy 2011-08-26 11:58:24 (233 views)
        
        I think I'll just keep my 'stash' as well. (nt) - LA-Sean 2011-08-26 12:47:29 (251 views)
        
        Re: I think I'll just keep my 'stash' as well. - rv8flyboy 2011-08-29 10:24:33 (225 views)
        
        I appreciate the offer. I may buy a few from you just for the hell of it. - LA-Sean 2011-08-29 13:33:10 (256 views)
        
        OK, no problem, let me know.. - rv8flyboy 2011-09-15 11:42:25 (218 views)
        
        I doubt there would be much interst but its worth a shot (nt) - LA-Sean 2011-09-15 13:46:58 (209 views)
        
        it is a shame really - rv8flyboy 2011-09-16 11:20:52 (224 views)
        
        I agree but the chip byitself is worthless unless a code/programm is utilized. (nt) - LA-Sean 2011-09-16 17:50:01 (214 views)
        
        Re: I agree but the chip byitself is worthless unless a code/programm is utilized. - rv8flyboy 2011-09-26 12:48:22 (208 views)
        
        can you email me when you get a chance please? (nt) - LA-Sean 2011-09-28 02:02:31 (252 views)
        
        only just read u mnessage, email sent... (nt) - rv8flyboy 2011-10-12 17:37:49 (222 views)

custom radio - robertengels 2011-12-04 15:38:48 (139 views)

E53 Audio / Blue tooth help and recommendations - biisdead 2011-10-16 10:10:32 (167 views)

Radio inop - jmindler 2011-10-14 12:09:45 (166 views)

standalone bm54 radio ibus controls - mistert69 2011-10-09 16:15:08 (206 views)

Change button i-bus codes - racer2086 2011-08-23 01:50:42 (278 views)
- Re: Change button i-bus codes - richardp 2011-10-05 10:20:15 (231 views)
- I need to dig up the code for the press, hold and release BUT - LA-Sean 2011-08-25 15:15:58 (234 views)
  - Here is the tape reverse release message - LA-Sean 2011-08-26 01:07:08 (224 views)
    - Re: Here is the tape reverse release message - racer2086 2011-08-31 10:12:43 (241 views)
      - There is no way to internally reprogram the code. - LA-Sean 2011-08-31 14:01:30 (233 views)

'02 X5 E53 Bluetooth retrofit - P/N 84106982067 from '05 530 - babenis 2010-07-03 08:57:51 (1071 views)
- AFAIK '05 530i uses most, '02 x5 I-Bus. So not compatible (nt) - Johan750 2011-09-18 15:05:15 (192 views)

I-bus based engine oil pressure and temp (pic) (url) - rv8flyboy 2010-07-11 21:42:01 (1450 views)
- Re: I-bus based engine oil pressure and temp - diravi 2011-09-06 04:45:23 (233 views)
  - Re: I-bus based engine oil pressure and temp - rv8flyboy 2011-09-06 11:05:29 (279 views)
    - What sensor. - diravi 2011-09-06 17:28:57 (215 views)
    - Is it possible to get it metric? - diravi 2011-09-06 17:25:19 (291 views)
      - Re: Is it possible to get it metric? - rv8flyboy 2011-09-07 12:29:51 (226 views)
- I'll take one (nt) - Edwin™ 2011-07-06 10:08:58 (420 views)
- Re: I-bus based engine oil pressure and temp - hpy540 2011-02-13 02:03:46 (813 views)
  - Re: I-bus based engine oil pressure and temp - rv8flyboy 2011-02-15 17:33:47 (487 views)
    - Prototype pictures (pic) - rv8flyboy 2011-03-10 10:11:47 (547 views)
- I'd be interested to see how NavCoder works on the E32 - kiwijochen 2010-07-18 15:46:17 (705 views)
  - Re: I'd be interested to see how NavCoder works on the E32 - hpy540 2011-02-18 17:25:42 (474 views)
    - Re: I'd be interested to see how NavCoder works on the E32 - rv8flyboy 2011-02-23 15:32:19 (472 views)
  - Re: I'd be interested to see how NavCoder works on the E32 - rv8flyboy 2010-07-19 00:31:07 (1143 views)

Update on Controlling external devices through your iBus - LA-Sean 2010-02-25 13:44:36 (1371 views)
- Re: Update on Controlling external devices through your iBus - james39 2011-07-12 10:41:37 (304 views)
- Re: Update on Controlling external devices through your iBus - bondmobile 2010-03-25 11:59:12 (835 views)
- I don't understand what this mod is suppose to do - pietern740il 2010-03-15 12:51:07 (793 views)
  - here is a link to my original post. (url) - LA-Sean 2010-03-15 13:56:43 (1051 views)
- Let us know when you have it up and running! (nt) - Edwin™ 2010-02-26 07:59:44 (768 views)
  - Its up and running! (nt) - LA-Sean 2010-03-03 18:56:49 (846 views)
- Brilliant work (once again). IMHO, parts been 1/3 - 1/2 of the final price - JL 2010-02-25 16:40:10 (933 views)

Pulling a log from my ULF - exwoodchuck 2011-03-15 13:14:25 (408 views)
- Yes, I believe that your ULF is identified as the TEL module on the I-Bus (nt) - Brian 2011-03-16 19:45:18 (386 views)

nav coder - coldwell 2011-02-04 09:27:08 (693 views)
- If you have the proper driver installed, double check the com port you are using - 740isport 2011-02-08 10:14:08 (527 views)
- I've used Navcoder before and am currently experiencing a problem but not - mouser 2011-02-04 23:28:19 (489 views)
  - Re: I've used Navcoder before and am currently experiencing a problem but not - coldwell 2011-02-05 23:43:08 (535 views)
    - I'm still not sure what interface you're using between your computer (url) - mouser 2011-02-06 23:25:52 (581 views)
      - Re: I'm still not sure what interface you're using between your computer - coldwell 2011-02-09 20:09:49 (470 views)
        
        Ok, I see it. - mouser 2011-02-09 22:58:27 (453 views)
        
        Re: Ok, I see it. - coldwell 2011-02-12 10:25:44 (423 views)
        
        I think to do the languages, you need one of the (url) - mouser 2011-02-12 22:57:21 (432 views)
        
        Re: I think to do the languages, you need one of the - coldwell 2011-02-13 21:24:56 (424 views)
        Successfully upraded my Language to US english using method - mouser 2011-02-13 19:58:38 (533 views)
        
        Re: Successfully upraded my Language to US english using method - coldwell 2011-02-13 21:19:50 (377 views)
        
        Re: Successfully upraded my Language to US english using method - mouser 2011-02-14 15:17:48 (519 views)
        
        Re: Successfully upraded my Language to US english using method - coldwell 2011-02-19 10:40:13 (451 views)
        
        Where are you located, I'm in SF East Bay and have disk and NavCoder (nt) - 740isport 2011-02-22 21:53:47 (501 views)

Problem using Navcoder - mouser 2011-02-04 23:23:43 (1126 views)
- Success !!! Here's what I did to get it to work - mouser 2011-02-11 20:06:59 (578 views)
- Navcoder with Resler worked fine on my car - but - farnarkler 2011-02-07 03:34:19 (535 views)
  - Thanks farnakler, strange he would need to disconnect the 12v - mouser 2011-02-07 19:34:10 (471 views)
- Re: Problem using Navcoder - coldwell 2011-02-05 23:52:35 (582 views)

Simple code for PIC - spacepl 2010-11-15 03:46:34 (646 views)
- where do u get the oil temp from? - rv8flyboy 2010-12-21 15:06:22 (529 views)

Looking for some guidance - jangell 2010-12-15 23:39:51 (403 views)
- Ask Brian on the BT forum. (nt) - Roy In GA 2010-12-19 15:32:13 (494 views)

how to use navcoder with vag-com cable? - babenis 2010-07-03 09:03:55 (2822 views)
- Re: how to use navcoder with vag-com cable? - roger8wilco 2010-12-11 09:14:57 (1430 views)
- Re: how to use navcoder with vag-com cable? - qsaeed 2010-11-19 13:57:52 (725 views)
- contact me directly by email (nt) - kiwijochen 2010-07-18 15:40:40 (708 views)

Suppress ibus messages - chas3 2010-11-16 04:14:07 (581 views)
- That is correct. what button press are you trying to intercept and block? (nt) - LA-Sean 2010-11-17 15:49:56 (501 views)
  - Re: That is correct. what button press are you trying to intercept and block? - chas3 2010-11-17 19:49:19 (515 views)
    - Yes, you need to utilize buttons that are ignored during certain operation. (nt) - LA-Sean 2010-11-23 10:33:17 (689 views)

iBus Y wire - chas3 2010-11-05 20:38:28 (542 views)
- Yes I built a Y adapter for use with Navcoder. This way I don't have - 740isport 2010-11-10 14:27:10 (515 views)
- Re: iBus Y wire - arucano 2010-11-08 13:45:17 (481 views)

MkIV Navugation retrofit issue - shaneo 2010-09-16 21:26:47 (890 views)
- Re: MkIV Navugation retrofit issue - shaneo 2010-09-23 07:31:25 (841 views)
  - Yes you need to recode the MKIV to recognize your system and TV input - 740isport 2010-09-23 16:02:44 (622 views)
    - dumb question but will ask. do the dealer recode for free? (nt) - super7 2010-11-04 20:10:51 (540 views)
      - Sorry, no. Dealers don't do anything for free! Will probably charge - 740isport 2010-11-10 14:24:59 (560 views)
    - Re: Yes you need to recode the MKIV to recognize your system and TV input - shaneo 2010-10-05 05:39:41 (626 views)

Need some help... - robertengels 2010-11-05 01:55:14 (478 views)
- Ask kiwijochen or Brian on the nav forum. (nt) - Roy In GA 2010-11-05 12:18:16 (511 views)

New to Ibus - newbie questions - paulcalif 2010-08-22 13:56:54 (764 views)
- This will answer a couple of your questions (url) - frank 2010-08-22 16:05:36 (1017 views)

Adding Menu Items - sama 2010-08-15 20:05:19 (760 views)

do i need to remove MID from the vehicle order after nav retrofit - babenis 2010-07-03 08:59:08 (782 views)
- Yes, MID and BM cannot coexist (nt) - kiwijochen 2010-07-18 15:41:08 (632 views)

LKM / LCM Question - coding and options? - catboy 2010-04-22 09:36:31 (1919 views)
- PM me if you are still working this out - Shled℠ 2010-07-12 12:25:47 (701 views)
- I think the newest LKM that would go into an e38/39 is the last one used in an - Roy In GA 2010-05-04 18:15:28 (810 views)

MID limitation 11 Characters? - netmgr 2010-04-26 15:53:25 (809 views)
- Re: MID limitation 11 Characters? - dimky 2010-04-27 00:52:42 (1396 views)
  - Re: MID limitation 11 Characters? - netmgr 2010-04-27 09:56:33 (882 views)
    - Re: MID limitation 11 Characters? - richardp 2010-06-13 06:50:23 (742 views)
      - Re: MID limitation 11 Characters? - dimky 2010-06-14 10:31:09 (640 views)
        
        Re: MID limitation 11 Characters? - richardp 2010-06-21 04:41:50 (724 views)
    - Re: MID limitation 11 Characters? - dimky 2010-04-27 10:32:23 (758 views)

E38 CD Changer - charliek 2010-04-04 14:28:16 (983 views)
- Re: E38 CD Changer - big19daddy67 2010-05-11 14:33:50 (711 views)
  - Re: E38 CD Changer - charliek 2010-05-18 08:58:26 (689 views)

NavCoder_Beta v2.7.46 Run-time error 13 Type mismatch - 95seven40 2009-10-05 04:22:08 (1026 views)
- Re: NavCoder_Beta v2.7.46 Run-time error 13 Type mismatch - spacepl 2009-10-21 16:06:54 (813 views)
  - Mine problem was FIXED when I upgraded to the latest version instantly. (nt) - 95seven40 2009-10-22 01:58:14 (963 views)
    - Re: Mine problem was FIXED when I upgraded to the latest version instantly. - spacepl 2009-10-22 12:42:54 (848 views)
  - Re: NavCoder_Beta v2.7.46 Run-time error 13 Type mismatch - spacepl 2009-10-21 16:08:02 (882 views)
    - Re: NavCoder_Beta v2.7.46 .......PA Soft - 95seven40 2009-11-07 12:43:31 (981 views)
      - I don't think it was NAVCODER that did anything to my car (nt) - 95seven40 2009-11-13 23:28:58 (889 views)
        
        IT WAS NOT NAVCODER! - 95seven40 2010-02-25 00:28:26 (819 views)
        
        Please do not use NavCoder to re-program fuel pumps.... (nt) - kiwijochen 2010-03-03 14:02:19 (852 views)
        
        or nuclear lauch codes (nt) - Shled℠ 2010-05-11 12:41:53 (789 views)

E38 transmission issues - boatquest 2010-05-10 12:21:45 (1600 views)

Navcoder simple interface help - norm 2010-03-13 17:04:08 (1039 views)
- Solved, thanks! (nt) - norm 2010-03-14 18:20:51 (775 views)
- Re: Navcoder simple interface help - norm 2010-03-13 23:51:34 (874 views)
  - Re: Navcoder simple interface help - dimky 2010-03-14 15:41:21 (809 views)

Nav system upgrade - exred92 2010-03-06 17:18:05 (784 views)
- That's all you need if you now have a MKII or MKIII. Read on the nav forum. (nt) - Roy In GA 2010-03-06 23:09:24 (809 views)
- Re: Nav system upgrade - exred92 2010-03-06 17:36:59 (784 views)
  - Re: Nav system upgrade - notenufgarage 2010-03-10 05:55:52 (841 views)

IBUS Y-split part numbers ? - tehcook 2010-02-24 19:33:54 (1021 views)
- Re: IBUS Y-split part numbers ? - tehcook 2010-02-24 19:37:58 (844 views)

DICE kit - cpcordier-CANADA 2010-01-29 10:36:55 (923 views)
- Re: DICE kit - joako 2010-02-03 22:26:25 (731 views)

Controlling external devices through your iBus - LA-Sean 2009-12-22 12:53:58 (2159 views)
- question about a device - adsr 2010-01-22 20:08:47 (928 views)
  - every manufacturer uses different IR signals for their products - LA-Sean 2010-01-25 18:14:25 (915 views)
    - Re: every manufacturer uses different IR signals for their products - adsr 2010-02-03 13:55:23 (791 views)
      - btw I already have an ibus device, are you going to release the piggy back - adsr 2010-02-03 13:58:29 (827 views)
  - Re: question about a device - arucano 2010-01-23 12:27:32 (908 views)
    - Re: question about a device - adsr 2010-01-23 18:44:09 (838 views)
      - Re: question about a device - arucano 2010-01-25 21:40:02 (794 views)
        
        Re: question about a device - adsr 2010-02-03 13:52:51 (841 views)
- very cool - great for a secret ejection seat trigger :p (nt) - cody3 2009-12-24 15:05:42 (1199 views)
  - Just make sure you wire it for the PASSENGER seat!! (grin) (nt) - sealbeach740 2009-12-24 16:26:51 (841 views)
- Ok so it looks like there is some interest, give me some time to see if - LA-Sean 2009-12-24 12:34:39 (885 views)
- Re: Controlling external devices through your iBus - bondmobile 2009-12-23 16:53:43 (1048 views)
- Happy to share my experience with you Sean - kiwijochen 2009-12-23 04:22:36 (972 views)
- Re: Controlling external devices through your iBus - medic1 2009-12-22 19:02:13 (886 views)
- Show us some video (nt) - black740ia 2009-12-22 18:20:48 (872 views)
  - I see you guys keep askign for a video? whats a video going to show???? - LA-Sean 2009-12-22 18:31:53 (967 views)
    - Cuss shits always better with video, even if its someone digging their nose. - Rogue7 2009-12-22 22:19:21 (868 views)
      - iit means that much to you, here is a video (vid) (url) - LA-Sean 2009-12-22 22:37:42 (1255 views)
    - If I may, What Sean has built for his demo purposes is an LED - sealbeach740 2009-12-22 18:54:44 (934 views)
- The great LA Sean, creator of SogoVision strikes again! I'm glad I had the - JL 2009-12-22 16:36:03 (947 views)
  - It was good to see you too JL. Package on its way. (nt) - LA-Sean 2009-12-22 17:25:40 (870 views)
- I like the idea you may open source it ... I've always been interested in the - aaron00740il 2009-12-22 15:34:09 (807 views)
  - Open source meaning the available relays are ready and respond to push buttons, - LA-Sean 2009-12-22 17:27:55 (1086 views)
- Definate interest here. This would replace 'fixed' modules like e-mirrors etc? - Shled℠ 2009-12-22 15:25:14 (953 views)
  - Shled, I'm not familiar with e-mirrors. - LA-Sean 2009-12-22 17:29:05 (789 views)
    - PM sent! (nt) - Shled℠ 2009-12-27 12:25:19 (861 views)
- Video?pics? more details please (nt) - Edwin™ 2009-12-22 14:50:33 (885 views)
  - Re: Video?pics? more details please - LA-Sean 2009-12-22 17:30:37 (846 views)
- I saw a quick demo of this over the weekend. The demo just - sealbeach740 2009-12-22 13:57:41 (813 views)
  - Thanks buddy for verification (nt) - LA-Sean 2009-12-22 17:32:01 (832 views)
    - You owe me $10! (grin) (nt) - sealbeach740 2009-12-22 18:41:17 (817 views)
- Really? Sounds promising, got video? slow people like Blue have a hard time - Rogue7 2009-12-22 13:22:14 (851 views)

ibus wire color e46 m3 - nuc1 2010-01-31 21:20:28 (1455 views)

LKM Coding - PASoft or NavCoder? - denismcg 2009-10-22 15:15:32 (1045 views)
- Re: LKM Coding - PASoft or NavCoder? - hyperbole 2010-01-30 09:55:49 (1030 views)
- Re: LKM Coding - PASoft or NavCoder? - joako 2010-01-26 19:23:01 (1221 views)
- No NavCoder is not made to do that. - 95seven40 2009-11-13 23:33:06 (940 views)

Need some help with NCS Expert. Any gurus here? Pls email me. Thx. (nt) - Mario 2010-01-25 22:07:48 (966 views)

Misbehaving A/C (Ticking sound from kick panel) - icecuberyder 2009-11-23 05:58:01 (645 views)
- Re: Misbehaving A/C (Ticking sound from kick panel) - robertengels 2010-01-24 19:20:00 (701 views)

IBus @ CD Changer Connector - joako 2010-01-16 16:46:11 (1284 views)
- Yes it is - kiwijochen 2010-01-19 02:01:05 (847 views)
- Re: IBus @ CD Changer Connector - dimky 2010-01-18 07:44:54 (837 views)

mid help - alohalenny 2010-01-03 23:14:02 (668 views)

Help in DC with coding my MKIV - balan 2010-01-03 16:48:47 (725 views)

So.....I built myself a lil black box..... (pic) - kapone 2009-12-23 19:01:24 (1584 views)
- Very Sweet! Thanks for the updates! (nt) - jbkds 2009-12-26 10:27:04 (812 views)
- VERY VERY nice! (nt) - Stu 2009-12-26 10:19:31 (794 views)
- Extremely Clean - Very Professional! Keep up the good Work! (nt) - JR 2009-12-25 14:55:13 (829 views)
- Kapone, I am very impressed by your work. Can't wait to see the finished car. (nt) - absessler 2009-12-25 01:49:39 (1662 views)
  - Gracias... My wife can't wait either....... - kapone 2009-12-25 09:11:56 (800 views)
- The Amp rack in the process of being wired.... (pic) - kapone 2009-12-24 20:18:44 (977 views)
  - A man after me' own heart. Nice detail and clean too! (nt) - Shled℠ 2009-12-25 23:02:43 (837 views)
  - impressive! (nt) - sdmike 2009-12-25 02:33:59 (794 views)
- Impressive work. Looks like a BOMB! (nt) - Lawguy 2009-12-24 16:22:18 (803 views)
  - You know.....now that you mentioned it....... (nt) - kapone 2009-12-24 20:12:30 (779 views)
- A related TAPE question, for all you experts... (pic) - kapone 2009-12-24 08:41:27 (1058 views)
  - When I use the tape input with my ipod, it reads 'tape error'... - laselvasurf 2009-12-25 03:30:49 (1049 views)
- that's very nice! (nt) - bpddaddy 2009-12-24 07:37:34 (828 views)
- Your on a move!! (nt) - Edwin™ 2009-12-24 04:51:46 (896 views)
- Looks very neat and tidy. Nice work. (nt) - RobinK 2009-12-24 04:28:56 (772 views)
- Very, very nice. Best use of a Radio Shack kit box I've seen... - sealbeach740 2009-12-23 23:18:07 (796 views)
  - Yes, that's an RS kit box. (pic) - kapone 2009-12-23 23:31:45 (1059 views)
    - Got it (I think). Thanks. Just for my clarification, don't you - sealbeach740 2009-12-24 16:14:45 (742 views)
      - lol..That would be the way to go, if I was wiring ONLY for a rear cam... - kapone 2009-12-24 20:11:12 (869 views)
        
        Clever - you've really thought this out. Once you're all done, I'd love - sealbeach740 2009-12-25 14:00:23 (778 views)
        
        Oh, trust me. A lot of this is WAY overkill. - kapone 2009-12-25 14:24:40 (754 views)
- btw, if you ever need the tool to remove pins from the radio or DSP connectors.. (url) - kapone 2009-12-23 21:54:59 (942 views)
  - Got one on the way now, thanks! (nt) - Shled℠ 2009-12-25 00:36:47 (802 views)
- That is amazing ... I could do all that solder work easily but I don't know all - aaron00740il 2009-12-23 21:40:54 (766 views)
  - Aww shucks...the wiring diagram aint even that bad.. (pic) - kapone 2009-12-23 21:47:23 (1060 views)
- I like, where are you going to place it. (nt) - rg0115 2009-12-23 21:22:07 (786 views)
  - Oh, this is hideaway. Somewhere in the jumble of electronics - kapone 2009-12-23 21:22:56 (902 views)
- The amp bypass harness. (pic) - kapone 2009-12-23 21:19:28 (983 views)

Controlling external devices through your iBus (url) - LA-Sean 2009-12-22 13:42:06 (805 views)

NavCoder v2.8.0 Released 12 December 2009 (url) - kiwijochen 2009-12-12 17:26:04 (1300 views)

NEW IBUS interface due out soon made by me!!!!! - theultimate740il 2009-07-15 13:08:43 (1876 views)
- Re: NEW IBUS interface due out soon made by me!!!!! - michip 2009-12-12 10:25:04 (933 views)
- No pictures yet? I bought the Resler board myself. But if your s works - 95seven40 2009-10-03 01:19:30 (1123 views)
- Guy. Relax. When/if you can make an effective interface for Jochen's - Shled℠ 2009-07-16 00:45:41 (1095 views)
  - Re: Guy. Relax. When/if you can make an effective interface for Jochen's - theultimate740il 2009-07-16 02:25:23 (1078 views)
- Testing Round 1 Results. - theultimate740il 2009-07-15 23:02:17 (1102 views)
  - You do realize that you can download NavCoder directly from Jochen?? - kapone 2009-07-15 23:06:11 (1352 views)
    - Re: You do realize that you can download NavCoder directly from Jochen?? - theultimate740il 2009-07-15 23:09:01 (1091 views)
      - Well, I guess the software couldn't be corrupted then. - kapone 2009-07-16 00:23:43 (1139 views)
        
        You need to pay Jochen to get the software to work! (nt) - Edwin™ 2009-07-16 02:54:06 (1016 views)
        
        Not during the evaluation period, and not for testing. - kapone 2009-07-16 08:04:07 (1165 views)
- I made my interface from the circuit posted many times on x5world.com. The - Roy In GA 2009-07-15 21:01:52 (1243 views)
- So, lemme ask you this.. - kapone 2009-07-15 18:42:23 (1043 views)
- UPDATE ON TESTING... - theultimate740il 2009-07-15 17:54:51 (1085 views)
- What's it for ? What does it do? What can I do with it? (nt) - beechy 2009-07-15 16:49:06 (1095 views)
  - Re: What's it for ? What does it do? What can I do with it? - theultimate740il 2009-07-15 17:29:57 (1077 views)
    - huh?? music through an IBUS interface?? - kapone 2009-07-15 17:31:58 (1081 views)
      - Re: huh?? music through an IBUS interface?? - theultimate740il 2009-07-15 17:39:27 (1247 views)
        
        ??????? Maybe you should make an EXACT list of what this interface can do...... (nt) - titanium740il 2009-07-15 17:47:59 (1053 views)
        
        Re: ??????? Maybe you should make an EXACT list of what this interface can do...... - theultimate740il 2009-07-15 17:50:11 (1043 views)
        
        I'll be happy to test it for you. - kapone 2009-07-15 18:31:34 (1022 views)
        
        Re: I'll be happy to test it for you. - theultimate740il 2009-07-15 23:03:22 (1026 views)
        
        Navcoder is a rock solid program as such... - kapone 2009-07-16 08:14:24 (1127 views)
        
        Are you using Navcoder SW from Jochen?? (nt) - Roy In GA 2009-07-15 20:48:03 (1065 views)
        
        yup. (nt) - kapone 2009-07-15 23:03:16 (1044 views)
  - + 1 What is the benefit of having this??? to hook up....... (nt) - carguy63 2009-07-15 16:56:45 (1039 views)
    - Re: + 1 What is the benefit of having this??? to hook up....... - theultimate740il 2009-07-15 17:31:36 (1088 views)
- I think some board users would want to have people actually test it before they - titanium740il 2009-07-15 16:30:47 (1078 views)
  - Re: I think some board users would want to have people actually test it before they - theultimate740il 2009-07-15 17:34:44 (1071 views)
    - I live in Boston proper so as soon as you have something to demo - Shled℠ 2009-07-16 00:50:46 (1081 views)
      - Re: I live in Boston proper so as soon as you have something to demo - theultimate740il 2009-07-16 14:03:21 (1052 views)
- What I'd LOVE to see.... - kapone 2009-07-15 15:25:30 (1272 views)
  - Doable and is available as a commercial product - kiwijochen 2009-07-16 01:46:46 (1049 views)
    - YGM :-) (nt) - kapone 2009-07-16 08:05:29 (1110 views)
  - Re: What I'd LOVE to see.... - theultimate740il 2009-07-15 17:41:22 (1045 views)
    - Hmm...maybe I should be the guinea pig and build one... (nt) - kapone 2009-07-16 00:26:59 (1039 views)
  - ??? You lost me, one more time in plain english please - white740 2009-07-15 16:28:34 (1054 views)
    - If you don't know what it is, trust me, you don't care.... - kapone 2009-07-16 00:25:46 (1157 views)
    - Re: ??? You lost me, one more time in plain english please - theultimate740il 2009-07-15 17:42:42 (1188 views)
    - With the interface you can code the LKM for check lights and code Nav (nt) - Edwin™ 2009-07-15 16:48:27 (1136 views)
- It would also help you to find someone in the NE that's been on the board awhile - eaglecomm 2009-07-15 15:00:10 (1250 views)
  - Re: It would also help you to find someone in the NE that's been on the board awhile - theultimate740il 2009-07-15 17:45:47 (1029 views)
- No roundel yet ;-) 55 posts, not sure a lot of people will chime in (nt) - Edwin™ 2009-07-15 13:21:31 (1117 views)
  - Remember Edwin: 'cute and cuddly, cute and cuddly' :-) (url) - Wiggi 2009-07-15 16:44:37 (1076 views)
    - good post wiggi (nt) - Rogue7 2009-07-15 18:25:56 (1019 views)
  - Re: No roundel yet ;-) 55 posts, not sure a lot of people will chime in - theultimate740il 2009-07-15 13:29:16 (1137 views)
    - Don't worry about it...Edwin is big but he's too far away to come and break your - Wiggi 2009-07-15 16:35:42 (1050 views)
      - Re: Don't worry about it...Edwin is big but he's too far away to come and break your - theultimate740il 2009-07-15 17:47:24 (1098 views)

tampabay member that has Navcoder - johndddd 2009-11-23 13:15:25 (923 views)
- John, I'm still in Dade City if you need me. (nt) - Roy In GA 2009-11-24 23:05:19 (695 views)

Mario. I found my nav coder picture. Send me your email address. (nt) - Roy In GA 2009-08-27 23:51:03 (910 views)
- Roy, I've sent you an email at the addy registered with BB. Check your spam fold (nt) - Mario 2009-08-28 12:51:52 (1015 views)
  - Here's the pic that Roy emailed to me... (pic) - Brian 2009-08-28 21:03:14 (1538 views)
    - Re: Here's the pic that Roy emailed to me... - johndddd 2009-11-23 07:43:26 (856 views)
      - Yes, depending on your model and year - Brian 2009-11-23 08:05:58 (752 views)
        
        Re: Yes, depending on your model and year - johndddd 2009-11-23 09:39:18 (773 views)
        
        The Resler interface does not come with a cable... - Brian 2009-11-23 09:59:26 (1331 views)
        
        Re: The Resler interface does not come with a cable... - johndddd 2009-11-23 10:07:16 (837 views)
        
        Most folk just disconnect the CDC and plug it into the Resler interface - Brian 2009-11-23 10:12:49 (851 views)
        
        Re: Most folk just disconnect the CDC and plug it into the Resler interface - johndddd 2009-11-23 10:27:41 (870 views)
        
        Here's a post with the I-Bus pin order & colors (url) - Brian 2009-11-23 10:38:51 (1106 views)
        
        Re: Here's a post with the I-Bus pin order & colors - johndddd 2009-11-23 10:43:15 (799 views)
  - Hope the picture came through OK. (nt) - Roy In GA 2009-08-28 18:08:16 (905 views)

hesitation - milenova 2009-10-27 20:29:50 (735 views)
- You may want to move this to the E38 forum (nt) - denismcg 2009-10-28 07:49:47 (744 views)

Navcoder crashing - mouser 2009-10-19 18:56:19 (1084 views)
- Power problem - kiwijochen 2009-10-21 14:26:15 (756 views)
  - Ok, I'm about to go check my power wire tap in, somethings obviously wrong (nt) - mouser 2009-10-21 15:04:28 (740 views)
- I would not hook a charger directly to the interface. Find a correct supply wire - Roy In GA 2009-10-19 22:11:15 (718 views)
  - Ok, I'll do as you say and retry (nt) - mouser 2009-10-20 00:26:53 (716 views)

1998 Navi Disk - trini3000 2009-10-19 20:25:01 (778 views)
- Navteq website or get a used one from Ebay (nt) - mouser 2009-10-20 00:28:27 (683 views)

NavCoder... how-to ? - dane 2009-10-19 04:20:01 (976 views)
- Re: NavCoder... how-to ? - dane 2009-10-19 08:27:33 (837 views)

BMW EVEREST IBUS US on 2005 325i - dasheize 2009-10-10 11:20:37 (1856 views)
- Give us the BMW P/Ns of the units so we can tell. (nt) - Roy In GA 2009-10-10 11:35:28 (821 views)
  - Re: Give us the BMW P/Ns of the units so we can tell. - dasheize 2009-10-10 11:44:58 (865 views)
    - Re: Give us the BMW P/Ns of the units so we can tell. (url) - lederhosen 2009-10-12 07:45:42 (804 views)
      - BT or not BT...that is the question eh? - dasheize 2009-10-15 07:20:18 (881 views)
        
        Well it would be kind of hard to get the true story behind - lederhosen 2009-10-15 18:18:51 (761 views)

Simple Interface question - jvfff 2009-10-09 19:29:18 (889 views)
- Carefully recheck your interface wiring (nt) - lederhosen 2009-10-10 05:31:36 (869 views)
  - Re: Carefully recheck your interface wiring - jvfff 2009-10-10 13:13:13 (779 views)
    - Sounds like your interface is not built correctly, even if - lederhosen 2009-10-11 08:11:52 (842 views)
      - Re: Sounds like your interface is not built correctly, even if - jvfff 2009-10-11 11:53:34 (801 views)
        
        Sounds like you might have an underlying power issue, if I understand - lederhosen 2009-10-12 07:29:53 (782 views)
        
        Re: Sounds like you might have an underlying power issue, if I understand - jvfff 2009-10-12 12:41:07 (805 views)
        
        Did you use the circuit I posted several lines down the page? (nt) - Roy In GA 2009-10-11 17:02:57 (809 views)
        
        Re: Did you use the circuit I posted several lines down the page? (url) - jvfff 2009-10-11 23:08:59 (1066 views)

iBus wire question? - 95seven40 2009-09-06 12:09:59 (902 views)
- I think it is white/yellow/gray. Search as it has been discussed. Its on the CD - Roy In GA 2009-09-06 13:23:25 (926 views)
  - Thank you Roy, you guys are the best. - 95seven40 2009-09-06 15:50:44 (901 views)
    - Yes, absolutely - kiwijochen 2009-09-07 15:38:43 (771 views)
      - Re: Yes, absolutely - 95seven40 2009-09-07 16:16:29 (786 views)
        
        You'll be fine. - kiwijochen 2009-09-08 02:06:56 (775 views)
        
        Plug X1532 should have I-bus if you have that large 6 pin plug. (nt) - Roy In GA 2009-10-05 12:51:19 (781 views)
        
        I got mine off this plug here. (pic) - 95seven40 2009-10-05 18:47:57 (925 views)

IBUS question - tomsmith 2009-10-04 18:52:55 (767 views)
- All E38 cars have the I-Bus - Brian 2009-10-04 18:56:09 (847 views)
  - Re: All E38 cars have the I-Bus - tomsmith 2009-10-04 19:02:39 (914 views)
    - Yes, your 1995 has the I-Bus and all that information (nt) - Brian 2009-10-04 19:50:45 (839 views)
      - Re: Yes, your 1995 has the I-Bus and all that information - tomsmith 2009-10-04 20:19:32 (807 views)

Can you run Navcoder & DIS,TIS, SSS and the GT1? - 95seven40 2009-10-03 16:15:41 (740 views)
- Re: Can you run Navcoder & DIS,TIS, SSS and the GT1? (pic) - 95seven40 2009-10-04 03:37:38 (1040 views)

E38 eLight + IBus ? - icecuberyder 2009-08-28 20:09:52 (1342 views)
- it's easy - kiwijochen 2009-09-04 17:15:27 (986 views)
- Or ask here - kiwijochen 2009-09-04 17:07:26 (938 views)
  - Re: Or ask here - icecuberyder 2009-09-04 17:37:10 (980 views)
    - Re: Or ask here - kiwijochen 2009-09-05 15:22:58 (1189 views)
      - Maybe you have the old LKM with the 26 pin instead of the 54 pin plug. These - Roy In GA 2009-09-28 02:11:07 (1041 views)
      - Jochen, here is the navcoder dump of the LKM read - icecuberyder 2009-09-06 20:55:21 (1158 views)
        
        Oldest LCM I've ever seen - kiwijochen 2009-09-07 15:37:39 (1108 views)
        
        Re: Oldest LCM I've ever seen - icecuberyder 2009-09-13 20:21:10 (870 views)
- I have E-light and use Navcoder to read I-bus traffic (nt) - Edwin™ 2009-08-29 02:58:00 (954 views)
  - Re: I have E-light and use Navcoder to read I-bus traffic - icecuberyder 2009-09-06 21:10:31 (941 views)
  - Re: I have E-light and use Navcoder to read I-bus traffic - icecuberyder 2009-09-02 16:32:25 (1201 views)
    - Re: I have E-light and use Navcoder to read I-bus traffic - kiwijochen 2009-09-05 15:30:20 (1319 views)

Finally bought my Resler Board (pic) - 95seven40 2009-09-25 02:48:53 (1256 views)
- What do I connect the NTSC pin to? (nt) - 95seven40 2009-09-25 02:57:03 (947 views)
  - Here's a picture , not too blurry,still learning, he he (pic) - 95seven40 2009-09-27 16:52:53 (1019 views)

Looking for a Resler interface..... I just built a simple - lederhosen 2009-09-27 12:32:03 (741 views)
- Normally Q2 is wrong - kiwijochen 2009-09-27 14:56:03 (757 views)

Picture of the homemade serial I-bus adapter. (url) - Roy In GA 2009-09-05 11:03:43 (1263 views)
- This is the circuit I listed down the page. (url) - Roy In GA 2009-09-05 11:10:15 (1090 views)
  - I have put mine in a 3x2x1 radio shack box now. Fits good (nt) - Roy In GA 2009-09-15 03:05:10 (899 views)
    - Roy any pics of the RadioShack box? (nt) - 95seven40 2009-09-25 02:35:01 (785 views)
      - No. It's just a std RS plastic box. Cover screws on, I put the DB socket in the - Roy In GA 2009-09-26 01:17:43 (974 views)

about ARCHOS interface - spacepl 2009-09-24 15:17:10 (851 views)

Question about NavCoder - JR 2009-08-23 22:28:59 (1405 views)
- Here is a pic of what you can turn off with navcoder (pic) (url) - Edwin™ 2009-08-24 03:29:28 (1479 views)
  - Big E, is this Navcoder similar to PaSoft for coding LCM? - Mario 2009-08-24 13:04:13 (1764 views)
    - Pasoft can code Vin to LCM not all the light functions. (nt) - zapperjoe 2009-08-24 13:54:42 (1468 views)
      - +1 (nt) - Edwin™ 2009-08-24 13:59:43 (966 views)
  - what do you use to connect the pc to car. - paprmkr 2009-08-24 10:35:09 (1001 views)
    - I made my interface from radio shack parts($10), circuit on xoutpost. (nt) - Roy In GA 2009-08-24 13:14:56 (960 views)
      - Looking for 56k resistor, no love at Radio Shack - lederhosen 2009-09-14 18:23:47 (1234 views)
      - Re: I made my interface from radio shack parts($10), circuit on xoutpost. - paprmkr 2009-08-24 14:19:00 (1313 views)
        
        I will look for my picture and the circuit. If you are handy and don't mind - Roy In GA 2009-08-24 16:03:07 (942 views)
        
        Roy, shoot me an email about this as well and pic of your interface. Thx. (nt) - Mario 2009-08-24 19:39:07 (973 views)
        
        Will do. Got to look up my picture. (nt) - Roy In GA 2009-08-24 22:18:53 (1040 views)
        
        I bought a little PC board there, about 2x4 inches, and used half of it (url) - Roy In GA 2009-08-24 16:32:07 (1074 views)
    - A Laptop with USB or COM and the I-bus interface (nt) - Edwin™ 2009-08-24 11:32:58 (1098 views)
- Yes Navcoder will code the LKM to eliminate check control for the fogs. (pic) - Lexicon 740iL 2009-08-24 00:42:20 (1295 views)
  - What color is the iBus wire on this harness? - 95seven40 2009-09-20 01:53:04 (1223 views)
  - Do you have more modules? - 95seven40 2009-09-04 19:35:22 (964 views)
  - Alex, how can I build my own Ibus module? This could be my next project (nt) - rg0115 2009-08-24 16:26:21 (1005 views)
  - So with the ibus installed... - Carguy63™ 2009-08-24 10:59:08 (976 views)
    - Yes, cdc plug, plugs in to interface. You can make a perm. connection if you (pic) - titanium740il 2009-08-24 11:52:03 (1139 views)
      - Is a CDC plug the same as a DB9 connector? (nt) - 95seven40 2009-09-06 16:08:09 (936 views)
      - Would I need a sepeerat (nt) - 95seven40 2009-09-04 19:37:44 (918 views)
        
        Do I need a LAPTOP just for NAVcoder or........ - 95seven40 2009-09-04 19:40:00 (1204 views)
      - Would I need a sepeerat (nt) - 95seven40 2009-09-04 19:37:44 (1004 views)
      - Just use the plug on the rear left taillight! + and - and Ibus all there (nt) - Edwin™ 2009-08-24 13:59:21 (998 views)
  - Hey Alex, I dropped you an email. - JR 2009-08-24 01:40:30 (925 views)
    - Yep it won't check that circuit if you tell it not to... (nt) - Lexicon 740iL 2009-08-24 02:33:19 (1083 views)

Looking for 56k resistor.......or sutiable substitute - lederhosen 2009-09-14 21:58:55 (1146 views)
- The 56k is not critical - kiwijochen 2009-09-17 04:08:46 (774 views)
- Yes I did a substitute for one of them, but I have to look. I either put a - Roy In GA 2009-09-15 03:11:00 (796 views)
  - Series adds ohms, just trying to keep my board small! (nt) - lederhosen 2009-09-15 14:42:58 (885 views)
    - I just lay one beside the other and solder the ends and then clip the XS. Still - Roy In GA 2009-09-15 17:40:38 (1154 views)

I-Bus collision error, anybody understand the cause? - rick540 2009-09-06 07:32:35 (928 views)
- Maybe the DSP needs to be coded for nav? Brian and kiwi would know. (nt) - Roy In GA 2009-09-06 13:21:06 (797 views)

NavCoder v2.7.0 Released 18 July 2009 - kiwijochen 2009-07-18 18:34:48 (120473 views)
- Remind us where this wonderful software is available? (nt) - farnarkler 2009-07-18 19:35:01 (120137 views)
  - Here... (url) - bugs1357 2009-07-18 21:25:49 (1018 views)
    - Great info, I am going to have to get this. (nt) - rg0115 2009-07-18 21:41:02 (756 views)
- Already updated it ;-) Tnx J man! (nt) - Edwin™ 2009-07-18 18:49:41 (825 views)
  - Re: Already updated it ;-) Tnx J man! - Carguy63™ 2009-07-20 10:52:09 (842 views)
    - Yes, NavCoder can stop the Accept screen - kiwijochen 2009-09-05 15:23:57 (786 views)

iBus simple interface crashes system (pic) - bondmobile 2009-06-25 23:25:42 (1770 views)
- 15mA is far too much! - kiwijochen 2009-06-26 01:42:59 (979 views)
  - I did this circuit too. All parts from Radio Shack less than $10. Look up the - Roy In GA 2009-06-26 11:00:41 (901 views)

iBus in the E38 Tail Light, can someone please clarify... - rex120 2009-05-25 20:19:55 (860 views)
- There is no ibus in the tail light, but... - kiwijochen 2009-05-26 02:20:46 (936 views)
  - Kiwi what is HugoD talking about this post then? - rex120 2009-05-26 23:54:53 (779 views)
    - HugoD is not talking about a connector 'in the taillight' - kiwijochen 2009-05-27 02:27:06 (824 views)
      - Re: HugoD is not talking about a connector 'in the taillight' - rex120 2009-05-27 02:43:49 (794 views)

F.S. Resler IBUS Interface - tflynn6693 2009-03-29 12:01:58 (1337 views)
- Re: F.S. Resler IBUS Interface - tflynn6693 2009-04-08 11:12:56 (989 views)
  - Re: F.S. Resler IBUS Interface (nt) - tflynn6693 2009-04-13 16:22:08 (845 views)
    - If you want to sell it, post on For Sale forum on right ===>>> (nt) - 740isport 2009-04-13 22:07:16 (918 views)
      - Re: If you want to sell it, post on For Sale forum on right ===>>> - tflynn6693 2009-04-14 17:57:02 (997 views)

Those of you that have diagnostic software on a laptop - darkknight74 2009-03-10 00:42:11 (885 views)
- I use serial port. You might check with fister. If you use a usb to serial make - zapperjoe 2009-03-10 11:38:59 (845 views)
  - I bought a Latitude D810 so I would still have the serial port. Didn't want to - Roy In GA 2009-03-16 12:39:48 (736 views)
- I only trust a serial port for diagnostics/coding on K & L line. Usb for I-bus (nt) - Beamer23 2009-03-10 09:16:30 (837 views)
- I use USB to serial...works fine. (nt) - titanium740il 2009-03-10 07:06:22 (881 views)
- I bought a USB to iBus interface. Easiest way to go. (url) - farnarkler 2009-03-10 01:08:43 (930 views)
  - But that's for navcoder and not GT1. (nt) - Roy In GA 2009-03-16 12:42:01 (784 views)

Just made a ibus interface. Where can i use croc clips on this car? - Beamer23 2009-03-03 09:37:09 (1255 views)
- The tail lights have Ibus too?? I was just checking out wires on the tail light - Beamer23 2009-03-10 10:51:35 (1013 views)
  - Maybe you're seeing the trailer data connection - kiwijochen 2009-03-10 15:31:33 (979 views)
    - ahhh I see. Sounds like I'll be getting on the I-bus without splicing (nt) - Beamer23 2009-03-10 15:51:02 (901 views)
  - I don't think so-- I would double-check - Brian 2009-03-10 12:39:39 (1013 views)
    - Check out this post... The guy says he's tried & it worked (url) - Beamer23 2009-03-10 13:09:17 (945 views)
      - He is talking about a plug that is secured to the tail light area - Brian 2009-03-10 13:38:12 (860 views)
    - hmm. I'll check again or try to get a picture of it. (nt) - Beamer23 2009-03-10 13:02:03 (973 views)
- Re: Just made a ibus interface. Where can i use croc clips on this car? - franco90 2009-03-04 15:30:39 (843 views)
  - Here's the link to resler's ibus interface (url) - Beamer23 2009-03-05 13:28:38 (1087 views)
  - Parts here. (url) - Brian 2009-03-05 10:21:25 (1069 views)
- On the loom connector - kiwijochen 2009-03-03 16:45:41 (929 views)
  - Sounds faster than unplugging the cd unit. Making an incision into those - Beamer23 2009-03-05 13:31:28 (962 views)
- I just finished my interface too. I have attached a permanent - Roy In GA 2009-03-03 13:29:12 (933 views)
  - Re: I just finished my interface too. I have attached a permanent - franco90 2009-03-07 17:04:07 (911 views)
  - P/Ns and info. For e38s hook up to big Plug X1832 located - Roy In GA 2009-03-04 17:18:39 (1163 views)
    - I'll check that out. Thanks (nt) - Beamer23 2009-03-05 16:40:52 (843 views)
- The easiest place is your CD changer plug - Brian 2009-03-03 10:29:28 (1003 views)
  - Thanks for the info, i think i'm gonna go with the y-adapter route (nt) - Beamer23 2009-03-05 13:29:40 (925 views)
  - Re: The easiest place is your CD changer plug - franco90 2009-03-04 15:34:01 (916 views)
  - Brian got any pics and/or parts list on your Y connector? (nt) - 740isport 2009-03-03 15:05:28 (960 views)
    - Pictures no, but parts yes... - Brian 2009-03-05 07:18:44 (1224 views)

For Sale: ibus serial interface (Resler) (url) - prof330i 2009-02-12 14:33:34 (1116 views)
- Sold! - prof330i 2009-02-13 11:43:07 (753 views)
- I assume you go to UMD? I went there...I'll take it...I can meet you tomorrow.. - titanium740il 2009-02-12 19:20:00 (795 views)

Maybe old news this but - ksmith38a 2009-01-27 15:19:43 (807 views)
- Exactly what I used.. - notenufgarage 2009-01-27 19:27:46 (770 views)
- LOL No sorry I hadnt, it was just so obvious when I buile the interface (nt) - ksmith38a 2009-01-27 15:58:01 (762 views)
- Were you looking at my pics? that is what i have been using the last 2 years! (nt) - Edwin™ 2009-01-27 15:28:33 (702 views)
  - What pics? (nt) - Wiggi 2009-01-27 18:06:15 (683 views)

Can somebody approve me on HackTheIBUS Yahoo forum? - rex120 2008-12-18 03:39:02 (945 views)

Ibus wire location - Michael Schuerger 2008-07-03 10:21:26 (1336 views)
- Gotta love the iBus splice. That's what got my CDC to work after my retro (nt) - Ed 2008-07-03 12:57:53 (877 views)
- That wire looks pretty unique... - Brian 2008-07-03 10:42:58 (955 views)
  - Re: That wire looks pretty unique... (pic) - Michael Schuerger 2008-07-03 10:46:39 (1271 views)
    - Yes, that is it-- the black block that is recessed in your picture... (pic) - Brian 2008-07-03 11:08:41 (902 views)
      - There are 3 wires that look right.... tried one - not working. (nt) - Michael Schuerger 2008-07-03 12:13:14 (853 views)
      - you rock!! Going outside to check! (nt) - Michael Schuerger 2008-07-03 11:13:50 (882 views)

ibus data wanted - kiwijochen 2008-06-06 13:17:56 (943 views)

Clarification: IBUS to Resler's adapter? - rex120 2008-05-24 00:36:58 (851 views)
- You must connect 12V, ibus and Ground - kiwijochen 2008-05-24 01:24:52 (947 views)
  - Re: You must connect 12V, ibus and Ground - rex120 2008-05-24 01:47:52 (1149 views)
    - Re: You must connect 12V, ibus and Ground - saft6luck 2008-05-24 10:07:11 (866 views)

My resler ibus interface just died. Anyone know someone selling one? (nt) - Martin 2008-05-15 13:23:39 (736 views)
- What I am the process of doing.... - davidf 2008-05-16 10:59:04 (923 views)
  - I actually have a SSS and GT1 laptop with Coding hardware - Martin 2008-05-16 12:07:48 (759 views)
- Martin, you are welcome to mine if you want it. I have an extra. - absessler 2008-05-15 15:32:14 (693 views)
- Martin, I have a few if you need one... (nt) - Lyonsden1980 2008-05-15 14:22:55 (707 views)
  - email sent :-) (nt) - Martin 2008-05-15 14:56:19 (778 views)
- Not sure if you are looking for a local chap. Here is the guy in denmark. (url) - eaglecomm 2008-05-15 13:37:02 (776 views)
  - right, but he is out of town until the 24th :-( therefore looking - Martin 2008-05-15 13:43:42 (729 views)

iBus command for activating voice recognition? - prof330i 2007-08-28 12:10:57 (924 views)
- Re: iBus command for activating voice recognition? - richardp 2007-08-28 13:27:06 (816 views)
  - Thanks! Will try! Re: iBus command for activating voice recognition? (nt) - prof330i 2007-08-29 08:04:18 (889 views)

Ibusanalyser lost my dash buttons?? - slickdog 2007-06-29 13:03:52 (822 views)
- Re: Ibusanalyser lost my dash buttons?? - slickdog 2007-06-30 14:26:04 (741 views)

iBus connector needed... - chivas 2007-05-06 21:49:47 (1040 views)
- I have a couble of cables maybe it is the one you need email me (pic) - itsstock 2007-05-09 11:07:33 (1209 views)
- Which connector are you trying to create (from what to what) (nt) - Brian 2007-05-07 09:45:15 (975 views)

Finally fixed my nagging Ibus problem. Big Thank you to Jochen for all his help (url) - Stygian7 2007-05-02 23:07:35 (1304 views)
- did you simply disconnect the module in the trunk to fix? what phone - ian 2007-05-02 23:57:51 (1028 views)
  - Yep, just unplugged X400. I have the first version in the e38...I think it's - Stygian7 2007-05-03 09:54:52 (901 views)
    - If it's the non-portable, corded handset, then it's the CMT3000VR. - visionbmw7 2007-05-09 01:54:57 (1192 views)