The 7 Series E38 Forum

Sign in to your BimmerBoard Account

BimmerBoard Official Time is 12:43:29 PM EDT, Saturday, September 04, 2010. Support this community with a monetary donation today.

Visit the E38 Lounge

Pages: 1 2 3 4 5 6 7 8 9 10 - Next >>

Post New Message

sticky: DFW7: Laps for Charity at Texas Motor Speedway, Sep 11, 6:00 PM (pic) (url) - JL 2010-08-24 15:38:32 (90 views)

sticky: How to add a photo to your signature. (url) - DavidC 2009-04-07 01:21:03 (8144 views)

sticky: How to upload and insert photos into messages (pic) (url) - DavidC 2009-02-15 10:02:42 (9161 views)

sticky: A welcome to those who are new here! (url) - M.Wong 2005-02-01 12:10:49 (19926 views)

Zionsville: The Fiasco That Never Ends (long) - kosmokratur 2010-09-04 12:23:21 (9 views)
- Re: Zionsville: The Fiasco That Never Ends (long) - jorgen 2010-09-04 12:40:19 (2 views)
- What does Zionsville say about what appears to be a - sealbeach740 2010-09-04 12:35:50 (3 views)
  - Re: What does Zionsville say about what appears to be a - kosmokratur 2010-09-04 12:41:32 (3 views)

Free. I have an old (replaced) MAF sitting in the garage. If anyone - JerrytheK 2010-09-04 11:41:26 (7 views)

alarm problem please help!! - a740bmw 2010-09-03 16:00:45 (16 views)
- Re: alarm problem please help!! - ajiitcole 2010-09-04 11:10:10 (1 views)
- So you have a few issues? Alarm and lights, have you tried to pull the - Edwin™ 2010-09-03 16:14:24 (11 views)
  - Re: So you have a few issues? Alarm and lights, have you tried to pull the - a740bmw 2010-09-03 16:19:37 (11 views)
    - Could be, but by fully disconnecting the battery and putting the - 740isport 2010-09-03 16:56:01 (10 views)
      - Re: Could be, but by fully disconnecting the battery and putting the - a740bmw 2010-09-03 17:00:58 (11 views)
        
        Re: Could be, but by fully disconnecting the battery and putting the - a740bmw 2010-09-04 08:40:33 (1 views)

How long could I really - hagensbmw 2010-09-04 00:43:46 (30 views)
- Years ago before synthetic oils came along the old timers, I am close, would - TxDarth 2010-09-04 10:59:08 (8 views)
- Take a look at what BG products can offer (nt) - BJames38 2010-09-04 09:28:51 (5 views)
- Edwin is right.....do NOT use ATF for this. (url) - pdef1949 2010-09-04 07:52:16 (15 views)
- I would not go with less than an a 50/50 mix if you insist on ATF. (nt) - TxDarth 2010-09-04 07:51:49 (5 views)
- ATF? sure you want to do this? why not use seafoam? (nt) - Edwin™ 2010-09-04 04:22:41 (8 views)

Ok it's a mystery (pic) - hagensbmw 2010-09-03 01:08:48 (95 views)
- +1 for replacing MAF (cleaning usually doesn't do squat) (nt) - davidf 2010-09-04 10:53:09 (1 views)
- Possibly a clogged cat? - inconsistent 2010-09-04 00:57:47 (6 views)
  - Re: Possibly a clogged cat? - Claudio 2010-09-04 01:02:26 (3 views)
- What's the mileage? Clog fuel filter? Dying fuel pump? - bmw635 2010-09-03 13:50:49 (10 views)
- Re: Ok it's a mystery - Claudio 2010-09-03 11:20:42 (18 views)
  - Replaced w/OEM - hagensbmw 2010-09-03 13:37:34 (9 views)
- Did you check the MAF resistance values across... - new750il540iowner 2010-09-03 09:00:17 (20 views)
  - How do I do this ?? - hagensbmw 2010-09-03 11:06:07 (11 views)
    - Car off, disconnect connector..multimeter on MAF pins (nt) - new750il540iowner 2010-09-04 10:23:48 (1 views)
- Did you do the VCGs? One thing that may have happened if the valve covers were - aaron00740il 2010-09-03 02:05:40 (25 views)
  - Could that plate be covered with sludge?? (nt) - hagensbmw 2010-09-03 16:44:47 (12 views)
    - Probably not ... I replied to your email (nt) - aaron00740il 2010-09-03 22:39:18 (7 views)
  - Not yet but it's on a list - hagensbmw 2010-09-03 11:03:15 (10 views)

DFW7: Laps for Charity @ Texas Motor Speedway & DIY @ Euro Connection 9/11-12 (pic) (url) - JL 2010-09-03 16:52:05 (61 views)
- Excellent plan. Looking forward to it (nt) - cody3 2010-09-04 10:45:32 (1 views)

8b and 21 are the only codes I got off my engine now.. - bmer_D 2010-09-01 17:38:27 (26 views)
- Re: 8b and 21 are the only codes I got off my engine now.. - Claudio 2010-09-04 00:35:10 (6 views)
  - hey Claudio, I'm using the R5 FCX3 - bmer_D 2010-09-04 09:05:20 (1 views)
  - Re: 8b and 21 are the only codes I got off my engine now.. - Claudio 2010-09-04 00:49:56 (3 views)
- any ideas about the fault code 21? (nt) - bmer_D 2010-09-03 09:00:42 (12 views)
  - What's the description since I don't have Peak? (nt) - bmw635 2010-09-03 23:38:10 (4 views)
    - it says camshaft vanos control cyl 1-4 - bmer_D 2010-09-04 09:07:15 (3 views)
      - Clean the CPS and Solenoid plugs ... did you replace CPS or Solenoids? (nt) - aaron00740il 2010-09-04 09:18:29 (3 views)
        
        I did clean the solenoid but not the plugs..not sure what the CPS is (nt) - bmer_D 2010-09-04 09:28:41 (4 views)
        
        Camshaft Position Sensor = CPS. My 740 has 1 on R head, in front of ... - WTH 2010-09-04 09:59:37 (3 views)
  - no one?? (nt) - bmer_D 2010-09-03 19:00:56 (7 views)
- Peake codes I'm guessing....what does the manual say I don't have it handy (nt) - jaytaylor12 2010-09-02 13:40:40 (13 views)
  - yup using the Peake and table OF - bmer_D 2010-09-02 14:14:26 (16 views)
    - 8b, I've had that one. It is the aux. fan. It can be the - conceptcol 2010-09-02 14:34:38 (14 views)
      - well do and thanks but hold on the congrats till I get it all right (nt) - bmer_D 2010-09-02 14:39:15 (10 views)
- Reset and take her for a drive (nt) - Edwin™ 2010-09-02 13:35:00 (9 views)
  - I've reset her many times and still get them - bmer_D 2010-09-02 13:36:35 (13 views)
    - What code reader are you using? codes don't ring a bell (nt) - Edwin™ 2010-09-02 13:38:50 (11 views)
- so does any one in the collective have an suggestions to resolve these codes? (nt) - bmer_D 2010-09-02 13:02:32 (9 views)
  - Have you reset them and see if they came back? (nt) - 740isport 2010-09-02 13:30:19 (11 views)

car starts and quits - rogo 2010-09-04 09:25:02 (8 views)

AUDIO and CENTRAL LOCKING PROBLEMS - ajiitcole 2010-09-04 06:07:58 (7 views)
- Yikes! There is another fuse bock you did not mention checking... - Shled℠ 2010-09-04 08:33:42 (6 views)
  - Re: Yikes! There is another fuse bock you did not mention checking... - ajiitcole 2010-09-04 09:23:15 (1 views)

Need opinion, thoughts, advice anything you have got. (pic) - stas 2010-09-03 20:18:24 (45 views)
- Stas there is a post that will have to be searched that discusses the cause of - aaron00740il 2010-09-04 09:13:19 (9 views)
- Link to Magnaflow Warranty (url) - JL 2010-09-03 20:36:40 (17 views)

Its Friday so a little ''Redneck Humor''.... (pic) (url) - TxDarth 2010-09-03 12:50:59 (124 views)
- Redneck Limo... (pic) - Claudio 2010-09-04 00:53:00 (45 views)
  - 10 More Redneck Limos ... (url) - aaron00740il 2010-09-04 08:56:57 (10 views)
- that last one is Moo Sho Pork (nt) - TxDarth 2010-09-03 12:52:55 (14 views)
  - heres some more (pic) - Snitch740i 2010-09-03 13:02:29 (104 views)
    - Redneck drink (pic) - Claudio 2010-09-04 00:54:52 (36 views)
      - More Redneck drink (pic) - Claudio 2010-09-04 00:56:20 (31 views)
    - how a redneck waterskies (surfs) (pic) (url) - TxDarth 2010-09-03 17:26:28 (61 views)
    - How a redneck trims his hedge... (pic) (url) - TxDarth 2010-09-03 17:24:17 (60 views)
      - lol takes all kinds (nt) - bmer_D 2010-09-03 23:12:58 (8 views)
    - This is how aredneck does hot dogs.... (pic) (url) - TxDarth 2010-09-03 17:22:28 (58 views)
    - they that car BBQ... i did that with a metal baby bed... it worked great (nt) - rex120 2010-09-03 17:06:13 (11 views)
    - More friday humor: Top signs you might need a new lawyer... - Lawguy 2010-09-03 15:19:09 (44 views)
      - I don't care who you are, that's pretty funny right there (nt) - inconsistent 2010-09-04 00:54:48 (5 views)

About to rejoin the BMW world - retcav1sg 2010-09-04 06:57:04 (19 views)
- Your car as a clickable link. Looks good (url) - Shled℠ 2010-09-04 08:30:37 (18 views)

Need some serious help with voice command going crazy.... - clgrant 2010-09-02 21:40:39 (26 views)
- It is three likely causes... - Brian 2010-09-03 07:01:03 (31 views)
  - Results so far.... - clgrant 2010-09-03 17:16:55 (20 views)
    - actually... - clgrant 2010-09-03 19:33:32 (12 views)
      - You have a short to ground between pin 32 and the arm rest plug... - Brian 2010-09-03 20:33:41 (8 views)
        
        Re: You have a short to ground between pin 32 and the arm rest plug... - clgrant 2010-09-03 21:14:00 (8 views)
        
        Yes, the center console wire runs directly to the ULF (nt) - Brian 2010-09-04 07:57:32 (1 views)
  - Re: It is three likely causes... - clgrant 2010-09-03 13:20:17 (13 views)

hello old and new BB members - davay1 2010-09-04 01:03:23 (21 views)
- If what sealbeach suggested doesn't work, you may have to remove the unit - pdef1949 2010-09-04 07:43:22 (6 views)
- If it were my CD changer, I'd sit & hold the Eject button for a couple - sealbeach740 2010-09-04 02:25:40 (6 views)
- The perfect time to get a DICE ipod unit Sorry, man, no clue - Wiggi 2010-09-04 02:07:40 (5 views)

Yellow High beam headlight update.... (pic) (url) - TxDarth 2010-09-03 16:49:02 (102 views)
- Nice ... shot me an email with the part number (nt) - aaron00740il 2010-09-03 22:26:14 (4 views)
- Can u take some pictures out in the driveway and not so close up. Also keep - TonyB 2010-09-03 21:59:36 (9 views)
  - Unless someone makes an aftermarket the Dodge units will not fit our cars. (nt) - TxDarth 2010-09-04 07:28:55 (3 views)
- Nice and unique Roger...I prefer the Yellow fogs tho (pic) - Snitch740i 2010-09-03 19:05:12 (47 views)
  - love your AE's super white, what brand?? (nt) - bmer_D 2010-09-03 19:34:17 (10 views)
    - Thnx..I dont know the brand but it was a Group buy done here a few years ago.. (nt) - Snitch740i 2010-09-03 19:50:42 (7 views)
  - I like my HIDs - they make driving/fogs actually worth while. (nt) - TxDarth 2010-09-03 19:18:08 (8 views)
- Must have taken hours (nt) - Shled℠ 2010-09-03 17:06:54 (9 views)
- TonyB brought this idea up - sorry Tony could not find your post before... (nt) - TxDarth 2010-09-03 17:00:34 (9 views)
- man that's blinding nice work - bmer_D 2010-09-03 16:57:03 (11 views)

a tech I know tells me of a coolant air bleeder machine made by - kw735il 2010-09-04 05:17:27 (10 views)

Coolant Draining in 740il - rex120 2010-09-02 04:40:14 (28 views)
- Use INPA On the both sides between the exhaust manifold there is a drain (pic) - Edwin™ 2010-09-02 06:32:05 (65 views)
  - So where do I get the super power to unscrew it??? - rex120 2010-09-03 02:12:31 (13 views)
    - Got the block drain plugs open - rex120 2010-09-04 04:38:15 (3 views)
    - By hand and tight is tight (nt) - Edwin™ 2010-09-03 02:33:17 (13 views)
      - What is the total amount of coolant in the cooling system 4 gallons? - rex120 2010-09-03 03:15:29 (10 views)
      - It should be unscrewable by a regular wrench? (nt) - rex120 2010-09-03 03:07:50 (12 views)
        
        Re: It should be unscrewable by a regular wrench? - jorgen 2010-09-03 10:56:44 (11 views)
        
        I need to go buy that swivel head (nt) - rex120 2010-09-03 15:09:16 (9 views)
        
        Yep it should system holds 12 liters (nt) - Edwin™ 2010-09-03 10:47:56 (11 views)
        
        12 liters is around 3 gallons - rex120 2010-09-03 15:11:21 (12 views)
        
        Yes the entire system with AC is 12.5 liters (nt) - Edwin™ 2010-09-03 15:33:57 (12 views)
        
        Idea - rex120 2010-09-03 18:07:58 (9 views)
        Can you tell I'm looking for a way to flush out the old coolant without draining - rex120 2010-09-03 17:04:04 (9 views)
        and the rest? - rex120 2010-09-03 17:02:30 (13 views)
  - LOL, Thanks man I'll give it a try tomorrow (nt) - rex120 2010-09-02 07:18:37 (9 views)

Is there a way - hagensbmw 2010-09-03 14:13:21 (15 views)
- Thried three times over teh course of an hour (url) - pdef1949 2010-09-04 00:17:55 (6 views)
  - Sorry & Thanks,, I did get ur email (nt) - hagensbmw 2010-09-04 00:45:50 (3 views)
- A little more info please,,, - pdef1949 2010-09-03 14:37:34 (10 views)
  - Ok a little more - hagensbmw 2010-09-03 16:40:44 (11 views)
    - Okay, that makes it easier..... - pdef1949 2010-09-03 17:11:30 (13 views)

OT: Laugh of the day! When is it OK to say the S word? (pic) - Edwin™ 2010-09-02 14:38:50 (174 views)
- Thanks E! I needed a good laugh!!! =) (nt) - melissa 2010-09-04 00:40:45 (3 views)
- Just about any one of those....some more than others! (nt) - TxDarth 2010-09-02 19:36:43 (9 views)
- lol, priceless moments (nt) - bmer_D 2010-09-02 15:59:29 (10 views)
- Thank you! I needed those. (nt) - JerrytheK 2010-09-02 15:53:09 (10 views)

Update on the 01' Sport (I'm trying to resolve a misfire) - mermar 2010-09-03 09:22:55 (28 views)
- So the code is gone as you changed it and it jumped? but still have - Edwin™ 2010-09-03 10:51:56 (11 views)
  - Ewdin, the code followed...up until the coil was changed. - mermar 2010-09-03 23:31:05 (5 views)
    - Dislexic Me! J/K! Sorry Edwin. (nt) - mermar 2010-09-03 23:31:57 (3 views)

Visit the BimmerBoard Store on Amazon.com!

e46 help please. Post on the e46 board, no replies. Seat belt latch - JerrytheK 2010-09-03 22:48:46 (8 views)
- I don't know E46 but it should be same as E24, E38. - bmw635 2010-09-03 23:27:41 (7 views)

E39 to compliment my E38? - 02j 2010-09-03 14:48:23 (57 views)
- Really good choice - 750il540it 2010-09-03 17:30:51 (24 views)
  - Kills tires though - 750il540it 2010-09-03 17:35:45 (13 views)
    - You can change camber settings. -1 degree works well. (nt) - chuckc 2010-09-03 17:37:41 (16 views)
- Well How dedicated are you to your love to BMW? - rex120 2010-09-03 15:23:25 (24 views)
  - Re: Well How dedicated are you to your love to BMW? - 02j 2010-09-03 17:15:57 (16 views)
    - That magical person who works on cars and presents a good clean result - rex120 2010-09-03 18:29:30 (13 views)
- There are a few of us on the board who own both E38 & E39 - hypercritic 2010-09-03 15:15:38 (32 views)
  - +1 on everything Joonho said. I'll add that the 740 is a larger, - sealbeach740 2010-09-03 23:04:38 (8 views)

HAPPY BIRTHDAY, HARRY!!!! (Audiavant)... Have A Great Birthday/Holiday Weekend!! (nt) - MyBimmerFromGod 2010-09-03 09:14:50 (30 views)
- Happy Birthday Harry ... I owe you a beer !!! (nt) - aaron00740il 2010-09-03 22:35:13 (4 views)
- Happy BD, man. All the best! (nt) - stas 2010-09-03 20:01:33 (5 views)
- OMG thank you Marie. It was a surprise to see this posted - audiavant 2010-09-03 20:00:06 (10 views)
- Happy birthday, buddy! (nt) - Merc63 2010-09-03 16:16:26 (9 views)
- Happy birthday, Harry! 29 (again) looks great on you, big guy! ;o) - Tim G in Central NJ 2010-09-03 16:14:12 (10 views)
- :o) HAPPY BIRTHDAY Have a GREAT day !! (nt) - Carguy63™ 2010-09-03 14:25:19 (9 views)
- HAPPY BIRTHDAY!!! (nt) - Shled℠ 2010-09-03 13:17:45 (9 views)
- Happy B'Day ! (nt) - cody3 2010-09-03 13:06:51 (9 views)
- Harry, I Didn't Know You Were a Virgin... - Simeon 2010-09-03 11:37:06 (14 views)
- Happy Birthday Harry! (pic) (url) - 740ilDuke 2010-09-03 11:32:01 (40 views)
- Did he grow a little over the past years? Congrats buddy! (nt) - Edwin™ 2010-09-03 10:50:21 (9 views)
- that goes from me too! (nt) - bmer_D 2010-09-03 09:42:08 (9 views)

E38 meet in PA (pic) - Merc63 2010-09-02 07:27:36 (170 views)
- Im in also Chris, GR8 call.....we were due. (nt) - audiavant 2010-09-03 21:05:04 (4 views)
- cheap hotels near by?? (nt) - bmer_D 2010-09-03 17:05:37 (10 views)
  - I have cooperate rate at Hampton near by. Let me know. (nt) - bghark 2010-09-03 18:24:21 (9 views)
    - thank you sir will do (nt) - bmer_D 2010-09-03 18:59:12 (8 views)
- Anyone from the MD/VA area that wants to meet up - Merc63 2010-09-03 12:14:39 (13 views)
- I hope I can make it! (nt) - 740ilDuke 2010-09-03 11:34:37 (12 views)
  - You? huh why? (nt) - Edwin™ 2010-09-03 12:01:11 (10 views)
- Count me in, too! (nt) - MyBimmerFromGod 2010-09-03 09:32:15 (9 views)
- I will try to come over. (nt) - stas 2010-09-02 21:59:45 (11 views)
- Count Me In and Tell me What to Bring (nt) - Thomas Meacham 2010-09-02 20:30:12 (10 views)
- west coast needs a meet soon.... (nt) - Snitch740i 2010-09-02 20:20:49 (10 views)
- I think I'll have all the kinks worked out by than (nt) - bmer_D 2010-09-02 17:37:31 (13 views)
  - Awesome! We'll make it a swap meet (nt) - aaron00740il 2010-09-03 02:06:43 (10 views)
    - lol, I'll be driving something japanese..so sure (nt) - bmer_D 2010-09-03 08:52:38 (10 views)
      - Oh no ... your turning Japanese? (url) - aaron00740il 2010-09-03 09:16:53 (18 views)
        
        hehe, I remember that song.... aw the japanese girls - bmer_D 2010-09-03 09:41:06 (10 views)
- Can I come too?....... (nt) - beechy 2010-09-02 17:22:48 (15 views)
  - Do you have a 740i or 740il ? (nt) - chuckc 2010-09-02 19:10:59 (13 views)
    - ummmm.........nope.........am I banned?... (nt) - beechy 2010-09-03 00:22:17 (12 views)
      - See how you are. Trying to cheat the system are ya' ? Not on Lawguy's watch (nt) - chuckc 2010-09-03 11:56:30 (9 views)
      - As if the lack-o-bimmer was the real reason they banned you. (nt) - Lawguy 2010-09-03 06:25:01 (12 views)
        
        wow, I was wondering when you'd jump in (nt) - bmer_D 2010-09-03 08:53:53 (9 views)
        Hey now ... we welcome all from the lack-o-bimmer club ... including you (nt) - aaron00740il 2010-09-03 08:51:31 (12 views)
        
        Hey....at least my Mini Cooper S is a pseudo BMW product! (nt) - Lawguy 2010-09-03 15:20:25 (12 views)
        
        Yep......it's about as German as fish and chips and a pint of bitter...... (nt) - beechy 2010-09-03 21:45:47 (3 views)
- I believe I may actually make that one looking at my work schedule... (nt) - steveKC 2010-09-02 17:11:27 (12 views)
- Sounds good to me, but... - Jason 2010-09-02 16:57:55 (18 views)
  - IIRC, it was to the right and down around the corner (nt) - Merc63 2010-09-02 20:00:15 (14 views)
    - Forgive me but... - Jason 2010-09-03 09:57:36 (15 views)
      - yeah, I was talking about meeting up at the park (url) - Merc63 2010-09-03 12:17:46 (17 views)
        
        Better map: (url) - Merc63 2010-09-03 15:43:55 (14 views)
- That time, date & location works well for me. (nt) - geoff046 2010-09-02 10:30:45 (15 views)
- We've done this a number of times and we have gone - pdef1949 2010-09-02 10:25:29 (22 views)

OT: starting to get an itch for an e65 (pic) - Lawguy 2010-09-03 17:03:35 (112 views)
- beautiful ride till I look at that back end :S - bmer_D 2010-09-03 21:06:02 (4 views)
- They are hot. Will be my E38 replacement (nt) - Ed 2010-09-03 20:51:53 (5 views)
- I have many seat miles in my Dad's 2005. It is excellent! - Brian 2010-09-03 19:48:53 (5 views)
- Re: OT: starting to get an itch for an e65 - 02j 2010-09-03 18:57:36 (7 views)
- 750li - 740ilDuke 2010-09-03 18:30:39 (8 views)
- Hey. Mrs C drive an 03 e65. Great car with very little trouble compared to the - chuckc 2010-09-03 18:25:40 (32 views)
- And what was the reason you got rid of the 740i again? oh yea...cost.. Was - chuckc 2010-09-03 18:04:14 (8 views)
- Here we go.......................... (nt) - Edwin™ 2010-09-03 17:15:50 (11 views)
- If it gets you on the E65 forum, and off this one, I say go for it... (nt) - Peter 2010-09-03 17:14:15 (13 views)
  - Bwahahahahahahahahahahaha.......... (nt) - beechy 2010-09-03 21:43:25 (4 views)
  - +1 and good riddance (nt) - chuckc 2010-09-03 18:05:29 (8 views)

Reminder to any ATL guys wanting to meet up Sunday night at Sim's Atlanta place - Ed 2010-09-02 19:48:59 (29 views)
- Yes, some cheese-steaks! (nt) - WTH 2010-09-03 18:47:03 (9 views)
  - I can't wait! I havent had those sandwiches in a long time. (nt) - Ed 2010-09-03 20:46:03 (5 views)
- Heading up to a friend's lake house for the weekend... - Imolatony 2010-09-03 12:44:14 (11 views)
  - Good deal. Hope to see ya! (nt) - Ed 2010-09-03 20:45:32 (5 views)
- I should be able to meet up after 5pm Sun. - cody3 2010-09-02 20:57:30 (20 views)
  - Great sig! I emailed you today from work and then got home and saw I emailed me (nt) - by mistake. Doh!=Ed 2010-09-03 00:01:53 (10 views)

Help! pulsating hum at idle from OSV after 10min OSV cap replacement. - rudye38 2010-09-03 12:19:27 (19 views)
- When the car is running push the cap, if the sound goes away it's not - Edwin™ 2010-09-03 13:30:26 (12 views)
  - So you think the clips are not clicked on properly? That is wat I think as well - rudye38 2010-09-03 14:11:07 (10 views)
    - So when you let go it comes back, try to get the cap off (in one piece) - Edwin™ 2010-09-03 15:42:43 (13 views)
      - U were right buddy. One clip wasn't on properly. And it was a real bitch to get - rudye38 2010-09-03 20:30:10 (5 views)
- most likely u have some sludge(oil build up) at the other end - Snitch740i 2010-09-03 12:49:58 (16 views)
  - Re: most likely u have some sludge(oil build up) at the other end - rudye38 2010-09-03 14:14:36 (10 views)

Vibration/shake at idle, possible causes? (vid) - Wiggi 2010-09-02 21:56:01 (53 views)
- Run some injector cleaner, I drove a lot of E38's and they almost all - Edwin™ 2010-09-03 15:41:08 (11 views)
  - I ran one tank last month. Maybe I'll repeat. I'm just hesitant to use seafoam. (nt) - Wiggi 2010-09-03 16:33:38 (9 views)
- what about motor mounts (nt) - sdmike 2010-09-03 14:38:12 (10 views)
  - Did them last month. The vibration actually got a little worse afterwards. (nt) - Wiggi 2010-09-03 16:32:02 (9 views)
- I have the same thing....ever since I had new motor - Carguy63™ 2010-09-03 14:19:52 (15 views)
  - Very interesting. One would think, new motor mounts would have - Wiggi 2010-09-03 16:36:53 (9 views)
- other things to check harmonic balancer. fan. fan clutch - rrse38 2010-09-03 01:03:52 (9 views)
- i have a similar problem but i think my idle is rougher - mmawolverine 2010-09-03 01:00:19 (13 views)
- Disconnect the MAF - see what happens... (nt) - TxDarth 2010-09-02 22:09:16 (11 views)
  - Installed brand new MAF last week (RR part = same Bosch part). No change (nt) - Wiggi 2010-09-02 22:47:47 (17 views)
    - Maybe you should close your trunk (nt) - hagensbmw 2010-09-03 00:30:52 (11 views)
      - No problem (nt) - Wiggi 2010-09-03 13:36:45 (13 views)
        
        whats a creating belt (nt) - hagensbmw 2010-09-03 20:14:50 (5 views)
- Injectors, OSV, plugs and manifold? - Xephius 2010-09-02 22:04:39 (24 views)

Remove a wire and its connector from stock fuse block? - Shled℠ 2010-09-03 13:17:04 (27 views)
- The wires have connectors on them and the 'connectors' have lil protrusions... (pic) - kapone 2010-09-03 15:52:47 (28 views)
  - Yup I have one of those. Wish it worked ;-) It has worked on the - Shled℠ 2010-09-03 16:23:14 (11 views)
    - It's coming..... Work's been nuts for the last few months... - kapone 2010-09-03 16:25:53 (9 views)
- In the block is a strip that you can pull out to remove the wires (nt) - Edwin™ 2010-09-03 13:35:39 (10 views)
  - Yup, my bad, I should have said I removed the white strip... - Shled℠ 2010-09-03 14:44:11 (13 views)
    - The metal pins have little hooks on the side to hold them in place. - Edwin™ 2010-09-03 15:35:40 (10 views)
      - I ripped one open and can now see the little 'tabs', one each side - Shled℠ 2010-09-03 16:05:01 (12 views)
        
        You have to 'pull' the wire, while pushing the tool in..... - kapone 2010-09-03 16:16:39 (10 views)
        
        Oh I'm pulling alright. Little hair left to pull... ;( (nt) - Shled℠ 2010-09-03 17:00:00 (9 views)
        
        Actually you want to push the wire in a little to release pressure on the tab - 740isport 2010-09-03 19:26:31 (7 views)

Thanks everyone - cogic740 2010-09-02 12:02:05 (62 views)
- Very sorry for your loss Charles (nt) - Shled℠ 2010-09-03 18:44:04 (8 views)
- Sorry I missed this Charles, please accept my condolences for you and the family (nt) - Edwin™ 2010-09-02 13:44:19 (17 views)
  - Please accept my condolences as well. (nt) - 740ilDuke 2010-09-03 18:37:45 (8 views)
  - Same goes for me, I was away on holliday. (nt) - bghark 2010-09-02 13:56:41 (9 views)
  - Thanks Edwin, no need to apologize. will catch up wth you. (nt) - cogic740 2010-09-02 13:53:47 (8 views)

Rear Ball Joint Tool Question? (url) - tromp 2010-09-03 14:01:13 (32 views)
- Re: Rear Ball Joint Tool Question? - brian72 2010-09-03 15:27:17 (13 views)
  - different tool entirely, different type of ball joint (nt) - bsnedeker 2010-09-03 16:11:45 (10 views)
- I don't know about that specific one...but that's the right idea - bsnedeker 2010-09-03 14:36:39 (14 views)
  - Re: I don't know about that specific one...but that's the right idea - tromp 2010-09-03 15:19:35 (13 views)
    - Yep, here's a pic of the one I got from them (pic) - bsnedeker 2010-09-03 16:11:04 (32 views)
- Zapperjoe made one and its pretty inexpensive and works great! (url) - 740isport 2010-09-03 14:23:54 (22 views)
  - Re: Zapperjoe made one and its pretty inexpensive and works great! - tromp 2010-09-03 15:20:39 (11 views)
    - Its all in his post that I linked. (nt) - 740isport 2010-09-03 16:54:21 (10 views)

635 csi question - revjim 2010-09-02 08:21:14 (28 views)
- Re: 635 csi question - Yooper 2010-09-02 11:12:03 (27 views)
  - OT - AL 2010-09-02 11:42:35 (15 views)
    - Re: OT - Yooper 2010-09-03 16:48:34 (12 views)
- The only draw back is electrical issue for old cars, but if you're handy - bmw635 2010-09-02 10:49:30 (15 views)
- I'll echo what grayshark said....... - pdef1949 2010-09-02 10:21:19 (24 views)
- Re: 635 csi question - 87grayshark 2010-09-02 09:18:34 (24 views)

OT.....I cant seem to find any 'How To Change spark plugs' - Snitch740i 2010-09-02 21:43:16 (22 views)
- Dealer might be the only way and less frustration. I found this (url) - Snitch740i 2010-09-03 16:47:43 (16 views)
- I second kc314 FORD dealership they have a special tool (nt) - AL 2010-09-03 16:18:53 (10 views)
- I think the fuel rails have to come out. Common Ford issue. (nt) - davidf 2010-09-03 09:54:12 (9 views)
- Two words: Ford dealer - kc314 2010-09-03 05:48:13 (13 views)
  - I don't know...I had a '68 Ford Mustang with 351... - TxDarth 2010-09-03 16:18:58 (10 views)
- I had an F150 with the 5.4L PITA...to change plugs. - TxDarth 2010-09-02 22:19:59 (23 views)
  - I had an Excursion V10....more than PITA to change plugs.... - peppe750 2010-09-03 07:34:18 (9 views)

Engine Removal V12 M73 200 750il (url) - cklekas 2010-09-03 13:25:13 (39 views)
- i can look for TIS instructions and PDF them to you - ian 2010-09-03 15:25:53 (10 views)
- Swap on a 2000 740iL (m62tu) - eaglecomm 2010-09-03 13:59:36 (16 views)
- I would these things in order: - bmw635 2010-09-03 13:45:13 (23 views)
- What year is your car? it seems to be a 2000, so the engine has to be a M73N - Edwin™ 2010-09-03 13:34:07 (10 views)

Navi/Radio Monitor works sometimes but usually not... - tomorrowneverdies735 2010-09-03 12:39:38 (16 views)
- Nav unit issue, if the rest keeps working thats it, to test this pull the nav - Edwin™ 2010-09-03 13:38:04 (12 views)

foot pedal removal - revjim 2010-09-03 11:20:24 (18 views)
- Here's a DIY from our favorite moderator, Mark Wong: (url) - sealbeach740 2010-09-03 12:19:10 (16 views)
- does the diagram help? (pic) (url) - Q 2010-09-03 11:59:14 (24 views)

interior hood latch - revjim 2010-09-03 09:17:39 (12 views)
- See diagram... (pic) (url) - Q 2010-09-03 12:04:24 (23 views)

rear wheel bearing frustration... - boraboy 2010-09-03 02:57:30 (22 views)
- Did you read in TIS how many tools you need to get it off? (nt) - Edwin™ 2010-09-03 10:48:51 (12 views)
  - Re: Did you read in TIS how many tools you need to get it off? (pic) - boraboy 2010-09-03 12:00:57 (38 views)
- Ok, pardon my ignorance...but aluminum? - bsnedeker 2010-09-03 09:48:33 (12 views)
  - Re: Ok, pardon my ignorance...but aluminum? - boraboy 2010-09-03 12:03:24 (15 views)

interior hood latch - revjim 2010-09-03 09:17:39 (15 views)
- Pop the little plastic cover and undo the screw that should be it (nt) - Edwin™ 2010-09-03 10:52:48 (13 views)
  - then do I just pop off the entire plastic housing with lever?? (nt) - revjim 2010-09-03 11:16:16 (13 views)
    - The lever will come off and the rest is behind the kickplate (nt) - Edwin™ 2010-09-03 12:02:42 (10 views)
    - have you looked up any of the diagrams to see what is connected to what? (pic) (url) - Q 2010-09-03 11:54:05 (18 views)

front seat removal - revjim 2010-09-03 11:17:33 (13 views)
- Do you mean these? (pic) - Q 2010-09-03 11:42:10 (33 views)
  - got it ....thanks a lot! (nt) - revjim 2010-09-03 12:02:08 (9 views)

Have a great Labor Day weekend! (pic) - Shled℠ 2010-09-03 09:46:56 (65 views)
- You forgot your coffee! (nt) - 740ilDuke 2010-09-03 11:28:02 (10 views)
- hehe thats funny - bmer_D 2010-09-03 11:16:47 (9 views)

OT: Got my parking pass for football season (pic) (url) - 740ilDuke 2010-09-03 11:22:40 (48 views)

ABS/ACS/DSC sensor problems resolved (pic) - Claudio 2010-09-02 01:00:35 (119 views)
- Yep, happens to front also and will just give DSC fault light usually. (nt) - davidf 2010-09-03 09:57:45 (9 views)
- I was hoping this was my problem but sadly no (nt) - bmer_D 2010-09-02 17:41:07 (18 views)
  - Re: I was hoping this was my problem but sadly no (pic) - Claudio 2010-09-03 10:50:25 (19 views)
    - In addition to the problem... - Claudio 2010-09-03 11:10:05 (15 views)
      - so true especially here - bmer_D 2010-09-03 11:13:37 (10 views)
    - I did replace the one connector on the back but will be looking at them closely - bmer_D 2010-09-03 10:55:18 (14 views)
- Thanks for sharing. (nt) - conceptcol 2010-09-02 11:38:29 (10 views)
- Glad you posted this, it's not always the ABS module (nt) - Edwin™ 2010-09-02 11:27:45 (17 views)
  - Never the Abs module on a 98` the problem.....99-01 high possibilty (nt) - Snitch740i 2010-09-02 19:02:27 (16 views)
- Very easy to find such a problem - kiwijochen 2010-09-02 11:07:45 (19 views)
  - If you don't have any tool, an ohmmeer to read 1050 is simple too. - bmw635 2010-09-02 20:32:22 (20 views)
    - BTW, this 1050ohm seems to be the maginc # for most BGMW sensors: - bmw635 2010-09-02 20:36:28 (12 views)
      - MOD- please respell MAGIC and BMW. (nt) - bmw635 2010-09-02 20:37:04 (10 views)

brake sensor on dash, tach and L/Km - pkr 2010-09-02 20:35:18 (27 views)
- +1 on what others said about the speed sensor. What color is the BRAKE light? - 740isport 2010-09-03 11:03:21 (10 views)
- Re: brake sensor on dash, tach and L/Km - Xephius 2010-09-02 21:06:26 (17 views)
- Yes, I think the front right sensor is for ABS and speedo. - bmw635 2010-09-02 20:38:52 (13 views)
  - Re: Yes, I think the front right sensor is for ABS and speedo. - pkr 2010-09-02 21:27:53 (12 views)
    - Here's each wheel sensor's function. (url) - bmw635 2010-09-02 21:32:16 (20 views)

Two very good reasons not to own a newer VW... - kw740il 2010-09-02 20:53:57 (76 views)
- The battery issue is the same as it is for the E65, sysytems shut down - Edwin™ 2010-09-03 10:56:18 (13 views)
- this is ridiculous maybe its trying to tell you something (nt) - bmer_D 2010-09-03 08:57:32 (11 views)

No headlights, marker lights, indicators, dash etc - skippy 2010-09-01 20:38:15 (35 views)
- Welcome here, pull the battery for an hour and see if that helps - Edwin™ 2010-09-03 10:54:38 (11 views)
- Light Comtrole Module - eismark 2010-09-03 09:17:14 (10 views)
- I don't have a real answer, but I'd suggest trying a soft reboot - sealbeach740 2010-09-01 21:18:56 (15 views)

What you guys think about them??? (url) - peppe750 2010-09-02 15:35:43 (72 views)
- I doubt that it will give you 26bhp, they would need to prove it on a dyno (nt) - Edwin™ 2010-09-03 03:11:12 (12 views)
  - Edwin,any source here in Europe for remaps? - peppe750 2010-09-03 03:38:01 (12 views)
    - The M73N is a real pita to do, also removing the Vmax is almost - Edwin™ 2010-09-03 10:47:14 (9 views)
- Thats too much $$$ for just 26hp (nt) - mouser 2010-09-02 19:54:53 (11 views)
- 2K for 26hp? huh? (nt) - bghark 2010-09-02 15:43:37 (18 views)
  - Re: 2K for 26hp? huh? (pic) - tomf301 2010-09-02 19:22:16 (61 views)
    - Man....I like this option.... (nt) - peppe750 2010-09-03 03:31:09 (11 views)
    - Yo Tom ... where have you been hidding? Beer and shoot some pool? (nt) - aaron00740il 2010-09-03 02:20:23 (9 views)
    - Care to share details? I'd like to put this on my 635. Thx. (nt) - bmw635 2010-09-02 20:25:01 (13 views)
    - seriously!!?? you have NOS?? sweet (nt) - bmer_D 2010-09-02 19:30:49 (13 views)
  - Re: 2K for 26hp? huh? - peppe750 2010-09-02 15:46:19 (20 views)
    - The chip is $1,950.20 , that is basically 2 grand... - ejonesie22 2010-09-02 20:53:20 (16 views)

Edwin's pixel repair question (url) - jmorgenson 2010-09-03 09:30:15 (35 views)
- Don't do it...chances are high you will make it worse and/or mess up the cluster (nt) - davidf 2010-09-03 09:52:13 (11 views)
- Got it. The sides of the wiring harnesses have to - jmorgenson 2010-09-03 09:49:54 (12 views)
  - Be careful, good luck and hope it works for you (nt) - Edwin™ 2010-09-03 10:46:06 (11 views)

Rev Counter stuck at 2000 or so - tomorrowneverdies735 2010-09-02 16:19:59 (22 views)
- Rear drivers side abs sensor - eismark 2010-09-03 09:10:43 (10 views)
- Re: Rev Counter stuck at 2000 or so - tomorrowneverdies735 2010-09-03 04:03:49 (13 views)

Bought me a 98 Civic. will be for my boy once we get all - paprmkr 2010-09-03 06:39:16 (15 views)

bmwairbag.com - Xephius 2010-09-01 14:14:41 (33 views)
- I assumed that if we clicked the link, it would lead to a photo of Peter. (nt) - Lawguy 2010-09-03 06:26:06 (9 views)
- Generally its not a good idea to mess with the SRS, (pic) - wcsnyder 2010-09-02 18:19:32 (48 views)
  - What site did you find this on? More within.... - Xephius 2010-09-02 20:18:32 (20 views)
    - Re: What site did you find this on? More within.... (url) - wcsnyder 2010-09-02 23:41:51 (25 views)
- Do a search, I think this has been mentioned before with a few - mouser 2010-09-01 18:46:12 (16 views)

airbag light came one unexepectantly - steeltag 2010-09-03 01:05:10 (11 views)
- Mine was bad connection under passenger seat - eismark 2010-09-03 02:34:26 (11 views)

Cl ad..... Check this 1 out...... (url) - Snitch740i 2010-09-02 22:01:12 (71 views)
- NEw....Update your school bus stock wheel with this (url) - Snitch740i 2010-09-02 23:47:35 (35 views)
- How about this...what a bargain (url) - Snitch740i 2010-09-02 23:43:04 (35 views)
  - Didn't know you could get matt finish wood in an E38. (nt) - absessler 2010-09-03 00:11:59 (10 views)
- oh the horror...Z8 Alpina (url) - Snitch740i 2010-09-02 22:10:48 (34 views)
- That pic looks familiar... was that Bucks 750? (nt) - TxDarth 2010-09-02 22:08:11 (13 views)
  - Bingo,,,,,,,Thats Bucks 750 all right..... (nt) - Snitch740i 2010-09-02 22:11:22 (13 views)

One Touch Lane Changer Help Needed (pic) - kwbooth 2010-09-01 22:50:38 (126 views)
- If anyone gets this working I want badly...I love this feature on my Avalanche. - TxDarth 2010-09-02 13:13:57 (15 views)
  - I'm too lazy to put mine in! I want too though and will soon (nt) - Ed 2010-09-03 00:02:50 (10 views)
  - Roger I sent you a link for a unit, it was $50 (nt) - Edwin™ 2010-09-02 13:35:59 (13 views)
    - I did not receive a link but I will just get in on the GB (nt) - TxDarth 2010-09-02 19:22:02 (11 views)
    - For 3-99 and up cars, yes it's in German. Do we want a GROUP Buy? (url) - Edwin™ 2010-09-02 13:38:10 (34 views)
      - Oh yeah GB, please. Is this the one you have, Edwin? (nt) - Wiggi 2010-09-02 22:45:05 (11 views)
      - if aaron is getting it, than I want in too (nt) - bmer_D 2010-09-02 18:47:54 (13 views)
      - I'm in on the GB ... you going to get us the details? (nt) - aaron00740il 2010-09-02 16:41:39 (14 views)
      - +1 count me in on a group buy. That is very cheap and I (url) - stonecloser 2010-09-02 16:16:59 (16 views)
      - I can't read, barely read English, but yes I am in if we GB. - TxDarth 2010-09-02 14:19:48 (14 views)
- Your wiring diagram doesn't apply to BMWs - kiwijochen 2010-09-02 11:06:31 (26 views)
- Here is Edwin's write-up for the blinker mod with Roland's module. (url) - Wiggi 2010-09-02 02:44:56 (28 views)
  - Re: Here is Edwin's write-up for the blinker mod with Roland's module. - kwbooth 2010-09-02 08:13:34 (15 views)
    - I would say NO ... your device works off of signal to the actual lights. - aaron00740il 2010-09-02 09:24:35 (21 views)
      - Are you sure the module is for an E38? (nt) - Edwin™ 2010-09-02 11:29:47 (15 views)
        
        Re: Are you sure the module is for an E38? - kwbooth 2010-09-02 13:01:17 (16 views)
        
        Re: Are you sure the module is for an E38? - aaron00740il 2010-09-02 16:58:37 (14 views)
        
        Re: Are you sure the module is for an E38? - kwbooth 2010-09-02 20:44:22 (15 views)
        
        As mentioned earlier when you find the fronts and hook up - TxDarth 2010-09-02 22:04:31 (16 views)
        
        Roger you are right ... for Edwin's module ... bwbooth works on the wires after - aaron00740il 2010-09-02 22:57:33 (15 views)
        
        I agree it will need to be connected at the steering wheel switch. (nt) - TxDarth 2010-09-02 13:15:32 (10 views)
        
        I looked up the product website ... it is a universal device that attaches to (url) - aaron00740il 2010-09-02 11:48:07 (21 views)

97' 740il - sonya 2010-09-02 10:32:18 (35 views)
- Fuel filter? Fuel pump? Fuel press. regulator? Fuel quality? Strange that ... - WTH 2010-09-02 13:04:00 (11 views)
- Welcome- U will enjoy this forum. It is a group of great and knoledgeable - conceptcol 2010-09-02 12:08:02 (13 views)
- Is fan clutch spinning freely with engine off or slight resistance with engine - bmw635 2010-09-02 10:41:46 (15 views)
  - Re: Is fan clutch spinning freely with engine off or slight resistance with engine - sonya 2010-09-02 11:04:55 (26 views)
    - With hot engine running, rev engine fast to see if the fan WOOOSSSH at the (vid) (url) - bmw635 2010-09-02 21:28:36 (17 views)

How are the handle lights wired? - 95seven40 2010-09-01 14:18:43 (23 views)
- Lexicon740iL's post may give you some info.... see link inside. (url) - sealbeach740 2010-09-01 21:29:47 (31 views)
  - You guys are ther BEST! I don't know what I would do without you. - 95seven40 2010-09-01 23:51:42 (13 views)
    - For future reference here's a link to Wiring diagrams. You'll probably (url) - mouser 2010-09-02 20:32:05 (15 views)
    - Thanks! Let us know how it goes....... (nt) - sealbeach740 2010-09-02 12:42:58 (10 views)

Cl Ad 740il for sale ( Nice upgrades) (url) - Snitch740i 2010-09-02 17:06:23 (54 views)
- Whats a 'Sports' sound system ? (nt) - mouser 2010-09-02 19:51:16 (12 views)
- LOL naw, he just did a facelift on a 97 740. But by the few pics looks like he - 740isport 2010-09-02 19:43:37 (11 views)

Help Please follow up - checked for spark by pulling a plug and - 86 2010-09-02 02:13:47 (24 views)
- If you have a spark thats good, is the engine getting fuel? (nt) - Edwin™ 2010-09-02 13:41:56 (12 views)
  - well, you can smell fuell on the plugs I pulled - 86 2010-09-02 17:48:05 (11 views)
- Are you sure you got the right TDC? - Bill Ranks 2010-09-02 08:37:09 (16 views)
  - Re: Are you sure you got the right TDC? - 86 2010-09-02 11:48:51 (15 views)
    - If you have tried both TDC and 180 off and not sure where you are.. - TxDarth 2010-09-02 12:18:11 (17 views)
      - Re: If you have tried both TDC and 180 off and not sure where you are.. - 86 2010-09-02 17:50:07 (11 views)
        
        Crankshaft position sensor! If somehow that got messed up you'll never - 740isport 2010-09-02 19:45:32 (10 views)

proximity alarm question (url) - wcsnyder 2010-09-02 10:07:43 (23 views)
- The older IMS (interior motion sensor) used RF technology and... - Q 2010-09-02 10:52:32 (24 views)
  - Re: The older IMS (interior motion sensor) used RF technology and... - wcsnyder 2010-09-02 11:55:43 (22 views)
    - Ah, I see. How affective do you think motion sensor flood lights (on the house) - would be? (NT) Q 2010-09-02 17:40:55 (12 views)

Question : possible water cooled alternator failure ... (url) - droj740i 2010-09-01 22:52:42 (32 views)
- OK then I need a new alternator ... 1 more question ... (url) - droj740i 2010-09-02 15:39:31 (23 views)
  - OEMBimmerparts - board sponsor, chearper than the ebay guys (nt) - kc314 2010-09-02 16:29:49 (12 views)
    - Sorry, not cheaper - but I'd still buy from Max first (nt) - kc314 2010-09-02 16:32:06 (9 views)
- What is your voltage when car is at idle? (nt) - Edwin™ 2010-09-02 06:34:47 (14 views)
  - Re: What is your voltage when car is at idle? - droj740i 2010-09-02 12:56:01 (16 views)
    - Got it, didn't see you car was running, the hunt for an alt is on i guess (nt) - Edwin™ 2010-09-02 13:39:52 (13 views)
- Exactly what happened to me. New battery and a few months later the red battery - Wiggi 2010-09-02 02:19:44 (19 views)
  - Re: Exactly what happened to me. New battery and a few months later the red battery - droj740i 2010-09-02 13:10:04 (15 views)

OFFER: BMWCCA members or members from Michelin (thru 10/13/10) (url) - Shled℠ 2010-09-02 16:04:23 (41 views)

Front window on 95 750il - bmw95 2010-09-02 14:49:22 (16 views)
- Yes you need to replace the window regulator, The Pink plastic dial broke - Snitch740i 2010-09-02 14:51:06 (13 views)

Compressor or heater valve - Xephius 2010-09-01 18:23:46 (29 views)
- None of those, maybe vent/recirc stepper motor? - Xephius 2010-09-02 08:58:21 (16 views)
  - Aux fan doing ok? (nt) - Edwin™ 2010-09-02 13:46:34 (9 views)

Magnesium Valve Cover Leak - hdhedden 2010-09-01 13:29:41 (37 views)
- bubbling on the edges is probably the paint. Material missing means new covers (nt) - JohnG 2010-09-01 14:52:45 (10 views)
- It isn't the covers that are bad...it's the paint - bsnedeker 2010-09-01 14:08:50 (14 views)
  - In most cases yes, but these castings are bad and the magnesium does deteriorate - JohnG 2010-09-01 14:51:20 (21 views)
    - Right, but based on his symptoms, it's the paint - bsnedeker 2010-09-01 16:35:19 (11 views)
    - +1, I have seen the covers Delaminate at the corners. The castings have some ... - bghark 2010-09-01 16:15:47 (13 views)
- I had the same issue, mine had a pop-corn type upfront.BTW. - conceptcol 2010-09-01 13:49:24 (16 views)
  - Re: I had the same issue, mine had a pop-corn type upfront.BTW. - hdhedden 2010-09-01 14:12:57 (12 views)
    - Here is the pic. The damage certainly is not on the paint. (pic) - conceptcol 2010-09-01 16:12:29 (45 views)
      - Clean it up first with a flat file, then a stone. Carefully. (url) - scottmm 2010-09-01 17:06:59 (14 views)
        
        Thank you, but I already replaced it. I bought one on Ebay for - conceptcol 2010-09-01 18:25:35 (10 views)

I had my front end aligned recently because I had mounted some - mouser 2010-09-01 17:55:31 (31 views)

Cool poster of who owns whom among auto makers on Jalopnic (url) - JerrytheK 2010-09-01 12:57:32 (65 views)
- talk about everyone sleeping together - bmer_D 2010-09-01 17:15:52 (10 views)
- Cool! Hard to follow some lines but overall a great image! - eaglecomm 2010-09-01 15:49:16 (11 views)

As it should be… - Brian 2010-09-01 16:44:49 (41 views)
- NICE! Enjoy all the miles! (nt) - Edwin™ 2010-09-01 17:15:45 (10 views)
- Couldn't happen to a better guy! Don't ya just love when... - bghark 2010-09-01 16:55:38 (11 views)

OT: Mad TV Sopranos Parody - Very Funny. (vid) (url) - 740ilDuke 2010-09-01 15:53:03 (41 views)
- lol, that pretty much sums up the show Sopranos (nt) - bmer_D 2010-09-01 17:09:28 (10 views)
- non scopare con la famiglia... (nt) - Claudio 2010-09-01 17:07:55 (11 views)
- John Madden Popcorn Popper / Mad TV (vid) (url) - 740ilDuke 2010-09-01 16:55:23 (21 views)
- Excellent! (nt) - JerrytheK 2010-09-01 16:01:40 (11 views)

FUSE FOR Battery PERMANENT POSITIVE LINE - ajiitcole 2010-09-01 16:47:19 (17 views)

Puff of White Smoke - motohaid 2010-09-01 15:14:05 (19 views)

Sluggish gearshifter 750 -96 - crosswinds 2010-09-01 15:06:48 (14 views)

question for the board re 99 740il - 2kil 2010-09-01 12:41:40 (28 views)
- Do you know the octane? (nt) - conceptcol 2010-09-01 12:55:06 (15 views)
- Re: question for the board re 99 740il - 2kil 2010-09-01 12:52:21 (14 views)

Pages: 1 2 3 4 5 6 7 8 9 10 - Next >>

Post New Message

Home | Privacy Policy | Terms of Service | Glossary | Advertising

Questions, comments, problems, please email webmaster@bimmerboard.com

©Copyright 2003-2010 BimmerBoard, LLC, All Rights Reserved.
No content from this web site may be reproduced or copied in any
form without the express written consent of BimmerBoard, LLC.

The BMW name and logos are registered trademarks of BMW AG
and BMW of North America, LLC.