The 7 Series E32 Forum

Noise from rear passenger side - jlnmdbmw2 2010-06-27 09:33:27 (97 views)
- Re: Noise from rear passenger side - jlnmdbmw2 2010-07-08 18:33:49 (26 views)
  - Re: Noise from rear passenger side - jlnmdbmw2 2010-07-25 20:14:27 (9 views)
- Need to replace accumulators... - Claudio 2010-07-08 00:48:40 (23 views)
- Need to replace accumulators... - Claudio 2010-07-08 00:48:12 (25 views)
  - my accumulators are 22 years old and still o.k. (url) - shogun 2010-07-08 07:20:39 (32 views)
- Re: Noise from rear passenger side - jlnmdbmw2 2010-07-07 16:45:37 (32 views)
  - Ride height for 15' rims is 20.55 +- 0.4 and for 17'rims - eliasazem 2010-07-07 17:45:38 (28 views)
- Re: Noise from rear passenger side - manta69 2010-06-27 21:07:04 (90 views)
- beer cans and..? (url) - shogun 2010-06-27 11:00:45 (102 views)
  - Fixed my thump in April 2009, by replacing beer cans, so - c00per11242001 2010-07-08 08:35:57 (28 views)

Expansion tank cap internal parts question. - mcf 2010-07-02 08:20:58 (101 views)
- Re: Expansion tank cap internal parts question. (pic) - JeffChia 2010-07-08 19:34:38 (67 views)
  - THANKS!!! - mcf 2010-07-19 11:56:44 (6 views)
  - Attaboy, Jeff. That's what I love about this board, - Rich 1990 750iL 2010-07-09 22:25:43 (33 views)
    - Didn't Bill Gates invent the internet? :-) (nt) - haiqu 2010-07-10 03:51:58 (25 views)
    - Thanks. Me too. Just doing my part and paying it forward. - JeffChia 2010-07-10 00:07:38 (32 views)
- Someone have an old one for disassemble? - mcf 2010-07-02 11:00:48 (77 views)
  - Re: Someone have an old one for disassemble? - catso 2010-07-18 11:09:52 (8 views)
- sorry, never disassembled one - shogun 2010-07-02 08:46:50 (88 views)

Vibration after a small accident.... - peppe750 2010-06-21 17:33:48 (79 views)
- Re: Vibration after a small accident.... - hobbymekk 2010-07-13 18:10:08 (5 views)
- Re: Vibration after a small accident.... - rv8flyboy 2010-06-21 17:57:13 (81 views)

Head Gasket (I hope!!) - 735i4fun 2010-06-29 11:43:10 (107 views)
- Re: Head Gasket (I hope!!) - ncbmwdriver 2010-07-01 11:25:00 (77 views)
  - Does the system remain pressurized after the engine cools? - cvillebimmer 2010-07-12 14:46:12 (30 views)
- Re: Head Gasket (I hope!!) - haiqu 2010-06-29 22:42:14 (89 views)
- I had same symptoms-head gasket- - stevebu 2010-06-29 15:20:50 (98 views)
  - Re: I had same symptoms-head gasket- - hecgar 2010-07-12 09:43:42 (29 views)
- Maybe the radiator is clogged? (nt) - whiteghost 2010-06-29 12:10:25 (83 views)

Are E34 steering columns interchangable with E32? (pic) - paulmer 2010-07-01 00:06:49 (110 views)
- Re: Are E34 steering columns interchangable with E32? - hobbymekk 2010-07-11 16:16:46 (38 views)

Is this eBay vendor reliable? - haiqu 2010-07-02 12:21:17 (94 views)
- Re: Is this eBay vendor reliable? - Hitmanx 2010-07-02 17:25:05 (79 views)
- Price comparison summary: - haiqu 2010-07-02 15:46:39 (104 views)
  - Oh yeah, and none of them had the upgraded M5 - haiqu 2010-07-02 15:51:20 (69 views)
    - Don't bother with aluminum control arms - save your money. - geerhed 2010-07-06 11:10:17 (46 views)
      - I opted to buy bushings only and replace them myself (nt) - haiqu 2010-07-10 03:56:25 (26 views)
      - Lower control arms?? Not aerobic exercises! - bolkow105 2010-07-09 20:48:40 (30 views)
- Re: Is this eBay vendor reliable? - ourv12 2010-07-02 13:14:28 (85 views)
  - OK, Lemforder is OEM but at what price? - haiqu 2010-07-02 13:42:40 (64 views)
- DeutscheParts = UNRELIABLE CRAP (url) - geerhed 2010-07-02 12:50:51 (84 views)
  - ^^^^ +1; on top of that.... - whiteghost 2010-07-02 19:45:28 (76 views)
  - Thanks for the heads-up! - haiqu 2010-07-02 13:40:58 (88 views)
    - Meyle is good too but I always want the best for my car. - ourv12 2010-07-02 14:10:36 (77 views)
      - Totally agree, but I'm a cheapskate. :-) - haiqu 2010-07-02 14:22:55 (77 views)
        
        double 02 BMW Parts sells Meyle (url) - shogun 2010-07-02 19:51:23 (86 views)
        
        I bought a set of double 02, no issues so far been running them since - c00per11242001 2010-07-08 18:58:44 (21 views)
        I'll try elsewhere, their prices are 2x AutohausAZ for everything (nt) - haiqu 2010-07-03 04:42:42 (73 views)

Need coolant issue advise - smeghead26 2010-06-28 16:59:56 (95 views)
- Re: Need coolant issue advise - tse22 2010-07-06 17:49:24 (37 views)
- Re: Need coolant issue advise - semar 2010-07-05 00:49:14 (73 views)
- Re: Need coolant issue advise - Hitmanx 2010-06-28 21:13:24 (82 views)
- Re: Need coolant issue advise - paulmer 2010-06-28 17:06:38 (80 views)
  - Re: Need coolant issue advise - smeghead26 2010-06-28 17:25:24 (86 views)
    - Re: Need coolant issue advise - smeghead26 2010-06-28 20:47:05 (91 views)
      - Rate or amount increases on an incline? (nt) - beachman 2010-07-02 23:04:05 (71 views)
        
        Re: Rate or amount increases on an incline? - smeghead26 2010-07-06 18:14:51 (29 views)
      - Re: Need coolant issue advise - beachman 2010-07-02 01:10:09 (73 views)
      - Re: Need coolant issue advise - manta69 2010-06-28 21:00:44 (88 views)
        
        Re: Need coolant issue advise - smeghead26 2010-06-29 11:11:15 (95 views)
        
        Coolant Issue Solved - smeghead26 2010-07-09 11:32:09 (38 views)

Front wheel bearings? - haiqu 2010-07-02 14:31:20 (70 views)
- CPL = complete maybe? But which ones? (nt) - haiqu 2010-07-03 03:08:08 (68 views)
  - use the online parts catalog with your VIN (url) - shogun 2010-07-03 03:30:41 (73 views)
    - Awesome link for BMW part numbers! - haiqu 2010-07-07 01:14:39 (26 views)
- you need cpl. hubs (nt) - shogun 2010-07-02 19:30:50 (64 views)

AC problem no more cold air - smeghead26 2010-06-30 23:48:09 (134 views)
- Re: AC problem no more cold air - hvacdude 2010-07-01 20:04:10 (99 views)
  - Re: AC problem no more cold air - smeghead26 2010-07-02 10:43:07 (82 views)
- A\C troubleshooting guide (url) - shogun 2010-07-01 01:12:01 (134 views)
  - Re: A\C troubleshooting guide - jlnmdbmw2 2010-07-02 19:45:48 (81 views)
    - You have to evacuate it with a vacuum pump first. (nt) - cspargo 2010-07-03 17:25:05 (78 views)
      - Re: You have to evacuate it with a vacuum pump first. - hvacdude 2010-07-04 03:51:10 (123 views)
        
        Not to highjack this post but... - tse22 2010-07-06 17:56:21 (42 views)
        Re: You have to evacuate it with a vacuum pump first. - jlnmdbmw2 2010-07-04 05:43:06 (67 views)
        yep, hvacdude is HVAC guy for 30yrs-so do what he says (nt) - shogun 2010-07-04 05:02:52 (77 views)

Back on the Road!! (pic) - mamboitaliano 2010-07-02 23:35:09 (160 views)
- Re: Back on the Road!! - paulmer 2010-07-03 04:14:43 (80 views)
  - Why did you do this to me???!!!! - mamboitaliano 2010-07-03 13:09:04 (95 views)
- looks nice now, well done! (nt) - shogun 2010-07-03 03:45:34 (84 views)
  - Thanks Coach! But question - mamboitaliano 2010-07-03 13:11:44 (73 views)
    - It could be the valve train or the injectors - whiteghost 2010-07-03 13:51:01 (91 views)
      - Found Where, but What (clicking noise) - mamboitaliano 2010-07-06 12:54:59 (51 views)
      - Miller MAF kit link= (url) - whiteghost 2010-07-03 13:54:30 (105 views)

IR remote - froos 2010-06-17 04:45:06 (91 views)
- The box with the corner cut off probably won't work - Johan750 2010-06-17 15:25:15 (86 views)
  - Re: The box with the corner cut off probably won't work - froos 2010-06-18 05:34:46 (89 views)
    - The switchblade was the standard remote in europe upto xx/92 - Johan750 2010-06-18 16:14:19 (80 views)
      - Do i need a factory radio? - froos 2010-07-01 17:38:27 (66 views)
      - Re: The switchblade was the standard remote in europe upto xx/92 - froos 2010-06-20 11:36:16 (77 views)
        
        Re: The switchblade was the standard remote in europe upto xx/92 - froos 2010-06-21 05:50:54 (73 views)
        
        Re: The switchblade was the standard remote in europe upto xx/92 - froos 2010-06-23 09:13:22 (74 views)
        
        Re: The switchblade was the standard remote in europe upto xx/92 - froos 2010-07-01 11:10:22 (70 views)
        
        Re: The switchblade was the standard remote in europe upto xx/92 - froos 2010-07-01 14:34:28 (83 views)
        
        Re: The switchblade was the standard remote in europe upto xx/92 - Johan750 2010-07-03 13:40:36 (63 views)
        
        Re: The switchblade was the standard remote in europe upto xx/92 - froos 2010-07-03 14:31:38 (62 views)
        
        Re: The switchblade was the standard remote in europe upto xx/92 - Johan750 2010-07-03 14:45:07 (64 views)
        
        Re: The switchblade was the standard remote in europe upto xx/92 - froos 2010-07-05 08:51:59 (59 views)

what in earth is hanging over my head ?? : ( - bhpaddict 2010-07-02 08:55:46 (92 views)
- Sheesh. I sure hope Friday was better... (nt) - haiqu 2010-07-02 12:06:11 (88 views)
  - well, yes, nothing when wrong and some fixes are made. : ) (nt) - bhpaddict 2010-07-05 06:01:36 (70 views)

Newbie - bought 1990 750iL (pic) - lawyermilloy 2010-06-15 10:54:15 (281 views)
- Fog light staying on - haiqu 2010-07-05 04:51:19 (68 views)
- A 750iL for $100? Bastard! :-) (nt) - haiqu 2010-07-05 04:39:05 (76 views)
- I'll try to help you...... - buddyiramae 2010-06-17 11:38:53 (108 views)
- Troubleshooting Link - beachman 2010-06-15 20:54:18 (101 views)
- ah, the pleasures of bimmer ownership! some recommendations... - 92735i 2010-06-15 17:51:31 (113 views)
  - Re: ah, the pleasures of bimmer ownership! some recommendations... - paulmer 2010-06-15 18:10:49 (93 views)
- Re: Newbie - bought 1990 750iL - krandoc 2010-06-15 15:47:43 (109 views)
- Re: Newbie - bought 1990 750iL - beachman 2010-06-15 13:12:19 (97 views)
- Welcome Newbie (url) - rv8flyboy 2010-06-15 12:24:29 (120 views)
  - Try this. (url) - hvacdude 2010-06-15 17:43:28 (116 views)
    - Reguarding the jumper (url) - hvacdude 2010-06-15 18:07:17 (103 views)
      - one more thing... (url) - hvacdude 2010-06-15 18:21:19 (86 views)
  - Re: Welcome Newbie (pic) - lawyermilloy 2010-06-15 13:38:03 (160 views)
  - Re: Newbie - joecer 2010-06-15 13:14:45 (111 views)

Anybody have issues with 750il Bosch dist.caps? - ourv12 2010-07-01 21:38:54 (117 views)
- Re: Anybody have issues with 750il Bosch dist.caps? (pic) (url) - Hitmanx 2010-07-02 11:40:38 (93 views)
- had the same problem (pic) - rv8flyboy 2010-07-02 00:04:06 (120 views)
  - Re: had the same problem - ourv12 2010-07-02 00:20:50 (70 views)
    - Re: had the same problem - rv8flyboy 2010-07-03 14:48:26 (68 views)
      - come again??? - ourv12 2010-07-04 09:32:52 (65 views)
        
        Re: come again??? - rv8flyboy 2010-07-04 14:59:32 (82 views)
- is the shaft seal o.k.? (url) - shogun 2010-07-01 22:55:56 (77 views)
  - Re: is the shaft seal o.k.? - ourv12 2010-07-01 23:28:27 (69 views)
    - yes, if seal is bad, oil should be inside the distributor - shogun 2010-07-02 00:01:39 (71 views)
      - Can I check for end play on the shaft by grabbing it and - ourv12 2010-07-02 00:12:32 (74 views)
        
        Re: Can I check for end play on the shaft by grabbing it and - ourv12 2010-07-02 12:24:31 (67 views)
        
        Coils can be bench checked for resistance (url) - whiteghost 2010-07-04 14:01:33 (72 views)
        
        Check my bosch dist. after more than 3 years and 10K (pic) - eliasazem 2010-07-04 19:32:26 (90 views)

My front shocks suck. LOL. - zee32 2010-06-20 04:32:19 (115 views)
- Springs and thrust arms. - zee32 2010-06-20 20:04:58 (95 views)
  - Re: Springs and thrust arms. - zee32 2010-06-27 21:49:51 (76 views)
    - PS kitted. Now charge issue. - zee32 2010-07-04 04:46:06 (69 views)
  - Yes it is clumsy. Torque bolt lying next to ramp. (url) - Patrick C 88 750 170K 2010-06-21 00:57:12 (106 views)
  - Re: Springs and thrust arms. - hvacdude 2010-06-20 23:35:25 (101 views)

Gas tank flap hinges on eBay - haiqu 2010-07-02 11:07:35 (95 views)
- do not buy them - shogun 2010-07-02 19:44:52 (87 views)
  - Too late, I've bought them :-( Never mind, we all make mistakes. (nt) - haiqu 2010-07-03 03:25:09 (71 views)
    - Malaysian Fuel Flap Hinge. - zee32 2010-07-03 19:47:07 (87 views)

92 750iL...Im having some crazy problems and need help!! - aureliaz3 2010-07-02 13:11:48 (98 views)
- Re: 92 750iL...Im having some crazy problems and need help!! - Hitmanx 2010-07-02 19:49:07 (77 views)
- Read this ... - haiqu 2010-07-02 17:50:42 (79 views)
  - Re: Read this ... - aureliaz3 2010-07-02 23:59:55 (60 views)
    - Sorry. Just cut & paste it to the browser. (nt) - haiqu 2010-07-03 01:34:13 (74 views)
      - Ok, How about the check control message? (nt) - aureliaz3 2010-07-03 12:22:28 (63 views)
        
        did you check battery and cranling voltage? - shogun 2010-07-03 12:26:30 (76 views)

trans fluid comming out of vent??? - clozer89 2010-06-29 14:15:59 (71 views)
- Out of the vent or dipstick? - alv12 2010-06-29 18:34:46 (76 views)
  - I would presume that the vent could be cleaned - whiteghost 2010-06-30 00:22:17 (73 views)
  - Re: Out of the vent or dipstick? - hvacdude 2010-06-29 23:59:52 (68 views)
    - Re: Out of the vent or dipstick? - joecer 2010-07-01 05:52:48 (72 views)
- Have you looking in the output flange area for leaks? - whiteghost 2010-06-29 16:49:09 (71 views)
  - I replaced all of the above and drivin it up to highway speeds for ~10mins - whiteghost 2010-07-02 21:43:26 (72 views)
  - Re: Have you looking in the output flange area for leaks? - kirt koeller 2010-06-29 20:53:08 (70 views)
    - Wow, we have have been blessed....... (url) - whiteghost 2010-06-30 00:16:36 (89 views)
      - Re: Wow, we have have been blessed....... - kirt koeller 2010-06-30 12:22:36 (80 views)
        
        How do I access this o-ring? - whiteghost 2010-06-30 13:17:38 (76 views)
        
        Re: How do I access this o-ring? - kirt koeller 2010-06-30 19:23:41 (79 views)
  - Re: Have you looking in the output flange area for leaks? - clozer89 2010-06-29 16:53:45 (73 views)
    - Re: Have you looking in the output flange area for leaks? - kirt koeller 2010-06-29 21:02:01 (90 views)

750iL O2 sensor replacement? - Hitmanx 2010-07-01 16:36:17 (80 views)
- Re: 750iL O2 sensor replacement? - Hitmanx 2010-07-02 11:47:42 (63 views)
- Re: 750iL O2 sensor replacement? - ourv12 2010-07-01 19:40:34 (80 views)
  - Re: 750iL O2 sensor replacement? - rv8flyboy 2010-07-01 20:09:06 (68 views)
- not that difficult, as long as you do not have rust (url) - shogun 2010-07-01 19:24:18 (72 views)

Euro trans man Kirt Koehler???? - amikus44 2010-06-21 15:10:53 (106 views)
- update: Kirt Koeller contact phone / email - shogun 2010-07-02 02:05:05 (2578 views)
- Re: Euro trans man Kirt Koehler???? - beachman 2010-07-02 01:44:50 (2563 views)
- to help you we need... at least some more info on your car - shogun 2010-06-21 23:35:02 (89 views)
- Re: Euro trans man Kirt Koehler???? - rv8flyboy 2010-06-21 15:48:09 (99 views)
  - Kirt Koehler???? - joecer 2010-06-21 18:01:34 (88 views)
    - Do you know where to get valve body refresh kits? - whiteghost 2010-06-21 19:22:43 (92 views)

No wonder sometimes our cars have electrical issues... (pic) - paulmer 2010-06-30 23:45:42 (178 views)
- Re: No wonder sometimes our cars have electrical issues... (pic) - htrdbmr 2010-07-01 12:48:22 (116 views)
- Re: No wonder sometimes our cars have electrical issues... (pic) (url) - Hitmanx 2010-07-01 09:38:16 (116 views)
  - hahh, that is not much, look at our pics (url) - shogun 2010-07-01 20:58:47 (96 views)
- Re: No wonder - joecer 2010-07-01 05:42:56 (105 views)

Front bumper trim - shoreline 2010-07-01 17:31:05 (74 views)
- U.K. 7 series register can help (url) - shogun 2010-07-01 19:17:56 (71 views)

Did some repairs this week: a few observations. - geerhed 2010-07-01 11:17:50 (97 views)

Tranny Issue - judoka7il 2010-06-18 20:37:04 (123 views)
- Re: Tranny Issue - rv8flyboy 2010-06-18 22:10:27 (87 views)
  - Good to have you back Gert - whiteghost 2010-06-19 00:24:18 (89 views)
    - Re: Good to have you back Gert - rv8flyboy 2010-07-01 10:07:00 (73 views)
    - Re: Good to have you back Gert - judoka7il 2010-06-23 20:33:41 (75 views)
      - Problem Solved - judoka7il 2010-06-30 20:10:19 (74 views)
        
        as I always say, 'trans program' does not absolutely mean a trans problem - shogun 2010-06-30 20:41:53 (91 views)
        
        ^^^ very true, from my experience - whiteghost 2010-06-30 21:18:17 (75 views)

Visit the BimmerBoard Store on Amazon.com!

Trans fluid leak Please HELP - clozer89 2010-06-23 12:35:57 (83 views)
- It would help to know what it is you are driving - rv8flyboy 2010-06-23 13:00:14 (70 views)
  - Re: It would help to know what it is you are driving - clozer89 2010-06-23 14:15:05 (74 views)
  - yes, details are needed... - shogun 2010-06-23 13:17:00 (86 views)
    - it could be a 1988 750iL - shogun 2010-06-23 14:04:59 (73 views)
      - Re: it could be a 1988 750iL - clozer89 2010-06-23 14:17:00 (68 views)
        
        plenty of pics here, see V12 engine swap (url) - shogun 2010-06-23 14:26:17 (100 views)
        
        Re: plenty of pics here, see V12 engine swap - clozer89 2010-06-23 14:45:04 (84 views)
        
        silver housing? I assume you mean the cover of the motor starter (url) - shogun 2010-06-23 15:02:25 (72 views)
        
        Re: silver housing? I assume you mean the cover of the motor starter - clozer89 2010-06-23 15:07:49 (76 views)
        
        nothing goes into the firewall there (url) - shogun 2010-06-23 15:33:51 (73 views)
        
        Re: nothing goes into the firewall there - clozer89 2010-06-29 14:02:55 (68 views)
        
        Re: trans vent - joecer 2010-07-01 06:11:17 (65 views)

Special tool available for the BMW hose clamps? - ourv12 2010-06-30 17:57:24 (102 views)
- are'nt these one time/not re-usable clamps? - shogun 2010-06-30 18:57:50 (70 views)
  - Actually after searching the internet I found the special - ourv12 2010-06-30 20:04:13 (79 views)

pixel in dash blury - clozer89 2010-06-29 13:34:37 (76 views)
- you mean dim? if so, change the bulbs (nt) - shogun 2010-06-29 19:42:49 (81 views)
  - Re: you mean dim? if so, change the bulbs - clozer89 2010-06-30 15:38:17 (67 views)
    - have you made a pixel test? - shogun 2010-06-30 19:07:14 (78 views)

2 rubber mounts supporting intake manifold wear out and sag - ourv12 2010-06-30 16:31:44 (80 views)
- keep it original, solid material is probably not a good idea - shogun 2010-06-30 18:55:09 (75 views)

MAF sensor question. - judoka7il 2010-06-28 22:01:17 (76 views)
- fits, 0 280 217 800 = 13621702078 (url) - shogun 2010-06-28 22:47:35 (84 views)
  - Erich,do you know the Bosch part numbers... - peppe750 2010-06-29 18:11:19 (74 views)
    - Re: Erich,do you know the Bosch part numbers... - hobbymekk 2010-06-30 17:34:22 (72 views)
    - yes, my V12 ignition wires also fit the E38 750 - shogun 2010-06-30 01:27:24 (77 views)
    - E32: 0 280 212 010 Air Mass Sensor - New V12 5 M70 GAS (url) - shogun 2010-06-29 19:41:15 (74 views)
  - Erich, i lready used a chinese MAF - bmw740jor 2010-06-29 14:12:59 (81 views)

Info on Kirt Koeller's direct phone number/email (url) - shogun 2010-06-30 11:15:07 (119 views)

Hi guys - haiqu 2010-06-29 05:34:30 (98 views)
- Additional data - haiqu 2010-06-30 10:15:48 (75 views)
- Additional data - haiqu 2010-06-30 10:14:13 (75 views)
- Testing - haiqu 2010-06-29 05:39:22 (90 views)

washer fluid leak - clozer89 2010-06-29 14:12:51 (75 views)
- Plumbing Tapes or Sealants To Seal Hoses And Pipes (nt) - shogun 2010-06-30 10:01:49 (70 views)
- De-engineering - Patrick C 88 750 170K 2010-06-30 01:41:15 (92 views)

Bentley revised the resistance spec for the CPS for M60 (url) - shogun 2010-06-29 01:30:21 (81 views)
- Re: Bentley revised the resistance spec for the CPS for M60 - rv8flyboy 2010-06-29 10:30:49 (77 views)
  - for the M70 the location of the connectors is like this (url) - shogun 2010-06-30 07:58:40 (83 views)

random EML - clozer89 2010-06-29 12:39:40 (82 views)
- Re: random EML - Patrick C 88 750 170K 2010-06-30 01:29:21 (77 views)
- have you made a stomp test? (url) - shogun 2010-06-29 19:50:23 (94 views)

shogun - kirt koeller 2010-06-29 21:11:45 (105 views)
- kirt, I will tell DavidC to change the contact adress, thanks - shogun 2010-06-30 01:18:55 (80 views)

Guidance on Retrofitting to HFC-134a (url) - shogun 2010-06-29 00:00:59 (87 views)
- filling capacities R12 and R124a and oil - shogun 2010-06-29 00:19:55 (89 views)
  - untill you get the upgraded condenser and then the capacity goes to 950 grams (nt) - Johan750 2010-06-29 12:43:27 (65 views)
  - read: R134a , sorry, typo (nt) - shogun 2010-06-29 00:20:36 (68 views)

Why on earth did/does BMW uses torx, and other pita fasteners? - paulmer 2010-06-23 01:33:51 (124 views)
- While you have that engine out... - geerhed 2010-06-29 09:20:02 (73 views)
- plain and simple - rv8flyboy 2010-06-24 10:52:53 (89 views)
  - Bringing the battle to the torx! - paulmer 2010-06-25 02:55:26 (79 views)
    - Re: Bringing the battle to the torx! - rv8flyboy 2010-06-25 09:33:31 (72 views)
- Re: Why on earth - joecer 2010-06-24 04:42:39 (87 views)
  - Re: Why on earth - paulmer 2010-06-24 15:17:44 (71 views)
    - Re: Why. - joecer 2010-06-24 17:24:52 (76 views)
    - Re: Why. - joecer 2010-06-24 17:24:03 (63 views)
- of course there is!!! a reason that is... - rv8flyboy 2010-06-23 10:27:33 (102 views)
- To make it hard for wrenchers like us. - cvillebimmer 2010-06-23 09:11:50 (76 views)

Black plastic valve on valve covers? '89 750il - ourv12 2010-06-28 19:12:56 (78 views)
- 'Dr. suck VCV' Hairywithit for example can explain it to you (url) - shogun 2010-06-28 22:58:48 (91 views)
  - Thanks, interesting note about these VCV's - ourv12 2010-06-28 23:30:01 (66 views)
    - we experimented last year a lot and even made this (url) - shogun 2010-06-28 23:39:02 (78 views)

intake manifold, cleaning and polish (url) - shogun 2010-06-23 09:21:46 (183 views)
- That is a nice write-up!! - rv8flyboy 2010-06-23 10:20:48 (76 views)
  - Anybody done extrude honing on the manifold? - rv8flyboy 2010-06-23 10:43:56 (84 views)
    - Re: Anybody done extrude honing on the manifold? - greyshadow 2010-06-24 20:15:02 (87 views)
      - Re: Anybody done extrude honing on the manifold? - rv8flyboy 2010-06-24 21:50:26 (79 views)
        
        Re: Anybody done extrude honing on the manifold? - greyshadow 2010-06-28 20:17:28 (72 views)
        
        Well then - rv8flyboy 2010-06-28 22:29:23 (71 views)
        Well then - rv8flyboy 2010-06-28 22:29:19 (68 views)
    - Re: Anybody done extrude honing on the manifold? - Hitmanx 2010-06-23 23:23:24 (92 views)
      - I fully agree (pic) - rv8flyboy 2010-06-24 11:18:53 (145 views)
        
        Re: I fully agree - Hitmanx 2010-06-28 21:27:06 (71 views)
        I'm definitely interested.... - peppe750 2010-06-24 13:53:20 (74 views)
        
        Re: I'm definitely interested.... - rv8flyboy 2010-06-24 14:41:45 (77 views)
        
        I bought it new...a good deal!! - peppe750 2010-06-24 14:58:41 (78 views)

Rear brakes sticking when hot... - JeffCullen 2010-06-23 16:27:45 (107 views)
- Re: Rear brakes sticking when hot... - manta69 2010-06-28 20:51:59 (77 views)
- Re: Rear brakes sticking when hot... - Hitmanx 2010-06-23 23:25:04 (84 views)
- check it, also the parking brake - shogun 2010-06-23 21:46:41 (83 views)
- How is the brake fluid condition/level and hoses. - alv12 2010-06-23 21:23:39 (94 views)
  - Does our system have a proportioning valve - whiteghost 2010-06-24 11:06:40 (79 views)

repair of interior light switch (url) - shogun 2010-06-28 17:37:10 (88 views)

ABS/ASC blink code test - shogun 2010-06-25 03:08:43 (96 views)
- Re: ABS/ASC blink code test - manta69 2010-06-27 20:56:12 (68 views)

BMW E31 and E32 glovebox flashlight repair (url) - shogun 2010-06-27 04:42:36 (123 views)

fuel pump - my406cid 2010-06-26 19:03:52 (72 views)
- fuel pump capacity (url) - shogun 2010-06-26 21:56:50 (78 views)

Advise on mounting M60 to stand and removing M60 flywheel.. - paulmer 2010-06-26 19:44:11 (83 views)

Help! Trying to use M60 flywheel lock pin..It gets stuck? (pic) - paulmer 2010-06-24 16:54:22 (113 views)
- Re: Help! - joecer 2010-06-25 14:46:15 (71 views)
  - Re: Help! - paulmer 2010-06-25 21:20:02 (80 views)
    - Re: Help! - rv8flyboy 2010-06-25 23:23:19 (69 views)
      - Re: Help! - paulmer 2010-06-26 00:17:16 (79 views)
        
        Re: turning - joecer 2010-06-26 05:29:17 (71 views)
        
        Re: turning - paulmer 2010-06-26 16:04:05 (73 views)
- Re: Help! Trying to use M60 flywheel lock pin..It gets stuck? - rv8flyboy 2010-06-25 09:45:44 (93 views)

washer reservoir keeps draining thru fog light sprayers - mspurbeck 2010-06-25 10:25:14 (80 views)
- I got rubber plugs and silicone sealant - Rich 1990 750iL 2010-06-26 14:33:10 (72 views)
- Re: washer reservoir keeps draining thru fog light sprayers - mspurbeck 2010-06-25 10:46:39 (74 views)
- replace the check valve behind bumper (nt) - shogun 2010-06-25 10:34:59 (84 views)
  - Re: replace the check valve behind bumper - mspurbeck 2010-06-25 10:49:57 (78 views)
    - remove the bumper and then you see all - shogun 2010-06-25 10:58:38 (77 views)

Check out this CL find (url) - hvacdude 2010-06-26 03:16:37 (123 views)

fuel economy and OBC - froos 2010-06-22 18:10:34 (98 views)
- You might have the wrong code plug - Johan750 2010-06-26 03:10:09 (70 views)
- OBC details (url) - shogun 2010-06-22 18:25:33 (108 views)
  - Re: OBC details - froos 2010-06-23 14:53:14 (70 views)
    - how about this from Australia (url) - shogun 2010-06-24 00:26:22 (92 views)
      - Excellent url Shogun! (nt) - froos 2010-06-24 05:31:19 (76 views)

Lock Sensor, Break Device, IHKA Cycling between hot and cold - shogun 2010-06-25 17:57:04 (93 views)

Customising the OBCIV information - e32express735i 2010-06-23 01:25:57 (79 views)
- Re: Customising the OBC-IV information - rv8flyboy 2010-06-23 13:14:24 (76 views)
  - Re: Customising the OBC-IV information - e32express735i 2010-06-24 22:22:58 (68 views)
    - No factory systems from BMW. AFAIK only from Volvo - Johan750 2010-06-25 01:48:31 (91 views)
      - Re: No factory systems from BMW. AFAIK only from Volvo - e32express735i 2010-06-25 03:33:12 (78 views)

Specification question - bcweir750 2010-06-20 14:45:44 (89 views)
- Re: Specification question - buddyiramae 2010-06-24 10:56:47 (69 views)
- 'iL' would have a greater wingspan than an 'i' - geerhed 2010-06-24 10:12:15 (66 views)
  - no sir, front doors are longer on the i - shogun 2010-06-25 00:12:22 (77 views)
  - 1845 + 1020+1020 mm (url) - shogun 2010-06-24 11:03:59 (72 views)
    - to give you an idea about building a garage DIY (url) - shogun 2010-06-24 12:15:05 (100 views)
      - Japan....such a nice place to live... - peppe750 2010-06-24 13:58:32 (75 views)

replacement for Gummipflege from Honda (url) - shogun 2010-06-24 12:51:21 (104 views)
- Honda TSB against Creaks, Pops, or Rattles (url) - shogun 2010-06-24 12:59:33 (84 views)
  - Interesting...where can I buy it? - peppe750 2010-06-24 13:45:03 (82 views)
    - visit the next Honda dealer ;-) (nt) - shogun 2010-06-24 23:08:21 (64 views)
    - yes (url) - rv8flyboy 2010-06-24 15:23:23 (77 views)

This would be a hell of an alternator charge cable... (url) - paulmer 2010-06-22 16:29:01 (105 views)
- Re: This would be a hell of an alternator charge cable... - 740gti 2010-06-23 22:03:21 (73 views)
- Re: This would be a hell of an alternator charge cable... (url) - rv8flyboy 2010-06-22 17:44:55 (85 views)

Tranny Leak (pic) - fidel101 2010-06-22 09:51:05 (134 views)
- My input seal leaked at a much higher rate (url) - Patrick C 88 750 170K 2010-06-23 01:05:24 (86 views)
- Re: Tranny Leak - joecer 2010-06-22 11:28:32 (89 views)
  - Re: Tranny Leak - fidel101 2010-06-22 18:25:02 (85 views)
    - Re: Tranny Leak - joecer 2010-06-22 20:13:31 (78 views)
      - Re: Tranny Leak - fidel101 2010-06-23 08:18:33 (77 views)
        
        Re: Tranny Leak - joecer 2010-06-23 08:50:52 (73 views)
        
        Re: Tranny Leak - fidel101 2010-06-23 09:43:04 (77 views)
        
        Re: Tranny Leak - joecer 2010-06-23 13:59:38 (72 views)

driveshaft + driveshaft seal problems = please read! - whiteghost 2010-06-15 23:53:56 (123 views)
- Thank you very much for the link + confirmation Patrick....... - whiteghost 2010-06-16 02:55:41 (110 views)
- There is an o-ring inside the output shaft! (url) - Patrick C 88 750 170K 2010-06-16 02:22:12 (111 views)
  - Anyone who has taken the 4hp22 tranny apart - help me out? (url) - whiteghost 2010-06-20 15:26:51 (86 views)
    - O-ring is supposedly on the housing side - Patrick C 88 750 170K 2010-06-22 00:37:23 (74 views)
      - So if I am reading you right - whiteghost 2010-06-22 01:03:24 (66 views)
        
        ... guess so... I have not done it myself (nt) - Patrick C 88 750 170K 2010-06-23 01:17:38 (59 views)
  - Re: There is an o-ring inside the output shaft! - ducu 2010-06-16 06:47:54 (103 views)
    - I am hoping that the o-ring is the case - whiteghost 2010-06-16 14:40:21 (86 views)

v12 - my406cid 2010-06-22 21:32:50 (89 views)
- The hydraulic piston should do the final push (url) - Patrick C 88 750 170K 2010-06-23 00:52:38 (87 views)
- I set it back to where it was - shogun 2010-06-23 00:18:30 (76 views)

Car history - froos 2010-06-18 05:38:59 (92 views)
- the dealer can only find history repairs - shogun 2010-06-22 11:19:57 (91 views)
  - Re: the dealer can only find history repairs - froos 2010-06-22 16:41:03 (70 views)
    - as for the BMW dealer Ungeheuer (url) - shogun 2010-06-22 17:11:46 (82 views)

transmission details / specifications (url) - shogun 2010-06-22 17:06:20 (92 views)

srs warning light stays on........ '90 750il - ourv12 2010-06-22 00:08:17 (81 views)
- Have you removed your steering wheel recently? Check for codes? (nt) - whiteghost 2010-06-22 01:07:45 (80 views)
  - in any case you need a airbag reset tool (url) - shogun 2010-06-22 08:05:33 (98 views)

Theoretically speaking - Paparon 2010-06-18 02:03:29 (91 views)
- Re: Theoretically speaking - Hitmanx 2010-06-22 02:01:46 (74 views)
- Thanks to all - Paparon 2010-06-21 14:34:36 (79 views)
- Ron, I still have a rebuilt 4hp22eh with 15k on it sitting in the garage... - cvillebimmer 2010-06-18 15:27:22 (101 views)
- yes, theoretically speaking you can do that. - rv8flyboy 2010-06-18 09:49:52 (83 views)
  - If I am not mistaken some German Tuner used to do just that - rv8flyboy 2010-06-18 09:51:11 (84 views)
    - Re: If I am not mistaken??? - joecer 2010-06-18 11:48:05 (90 views)
      - I know the 4hp22 has a 7 and 8 pin version valve body - whiteghost 2010-06-19 00:29:51 (76 views)
        
        Re: a 7 and 8 pin version valve body - joecer 2010-06-19 05:49:58 (80 views)

ECT code - trades707 2010-06-21 18:49:54 (71 views)
- Did you mix up/cross the plugs for the - whiteghost 2010-06-21 19:25:55 (78 views)
  - Re: Did you mix up/cross the plugs for the - trades707 2010-06-21 21:37:26 (64 views)
    - Being a 1992 - You should have EML - whiteghost 2010-06-21 22:15:08 (68 views)

BMW 750iL loosing power after few minutes - calomora 2010-06-20 19:46:46 (97 views)
- plug the fuel tank breather valve going into DKs - Patrick C 88 750 170K 2010-06-21 00:43:18 (92 views)
- Re: BMW 750iL loosing power after few minutes - hvacdude 2010-06-20 23:43:46 (96 views)
  - Re: BMW 750iL loosing power after few minutes - calomora 2010-06-21 18:22:30 (82 views)
  - Re: BMW 750iL loosing power - joecer 2010-06-21 08:40:43 (82 views)
    - Re: BMW 750iL loosing power - froos 2010-06-21 18:34:55 (80 views)

Who wanted my Valve Body Spring? - Hitmanx 2010-06-20 23:45:51 (85 views)
- That would be me, I'll Pm you in the morn as I am going to bed. (nt) - whiteghost 2010-06-21 02:30:25 (71 views)
  - emial sent; thx! (nt) - whiteghost 2010-06-21 12:47:38 (59 views)

Rear Main Engine Oil Seal Problems - bmw740jor 2010-06-20 11:41:46 (79 views)
- Re: Rear Main Engine Oil Seal - joecer 2010-06-20 13:55:16 (90 views)
  - ^^^agreed on what everything Joecer said - whiteghost 2010-06-20 16:24:58 (82 views)

Exhaust system for 750iL (pic) - lawyermilloy 2010-06-16 09:11:36 (193 views)
- If I was you... - hvacdude 2010-06-18 01:16:58 (89 views)
  - Re: If I was you... (pic) - lawyermilloy 2010-06-18 11:11:39 (104 views)
    - did you play for the New England Patriots? (nt) - Rich 1990 750iL 2010-06-19 17:59:27 (71 views)
- Re: the rest of the Exhaust system for 750iL - joecer 2010-06-17 13:02:01 (83 views)
  - Re: the rest of the Exhaust system for 750iL - lawyermilloy 2010-06-17 17:12:07 (85 views)
    - Re: the rest of the Exhaust system for 750iL - joecer 2010-06-17 20:42:02 (80 views)
- Re: Exhaust system for 750iL - joecer 2010-06-16 11:36:10 (103 views)
  - Re: Exhaust system for 750iL (pic) - lawyermilloy 2010-06-16 19:04:44 (121 views)
    - Re: Exhaust system for 750iL - joecer 2010-06-16 21:09:07 (84 views)

88 750il - clozer89 2010-06-18 12:35:13 (110 views)
- Flush all fluids, perform intake clean, check belts, hoses, drive it (nt) - 92735i 2010-06-18 13:34:57 (81 views)
  - Re: Flush all fluids, perform intake clean, check belts, hoses, drive it - clozer89 2010-06-18 14:38:37 (90 views)
    - Re: Flush all fluids, perform intake clean, check belts, hoses, drive it - rv8flyboy 2010-06-18 22:22:50 (89 views)
    - hit 'Search' button above, best way to learn answers...good luck! (nt) - 92735i 2010-06-18 16:13:45 (76 views)
      - Re: hit 'Search' button above, best way to learn answers...good luck! - paulmer 2010-06-18 16:55:20 (77 views)
        
        Re: Maintanence - joecer 2010-06-19 13:03:42 (81 views)

After many hours of toil, an update on the 540. Trans out! (pic) - paulmer 2010-06-19 01:04:50 (137 views)
- Re: After many hours - joecer 2010-06-19 05:45:20 (80 views)

door lock? - cbpieper 2010-06-16 04:16:09 (107 views)
- Re: door lock? - gus 2010-06-17 06:19:39 (83 views)
- Re: door lock? - beachman 2010-06-16 14:38:23 (85 views)
- Latch mechanism can be checked easily from the side - Patrick C 88 750 170K 2010-06-16 14:12:26 (111 views)
  - Re: Latch mechanism can be checked easily from the side - cbpieper 2010-06-16 17:34:05 (81 views)
    - It has happened to me too.....Here is what I did... (pic) - realtygary 2010-06-19 03:07:40 (115 views)

ATTN: RICK 540i- Did you ever do a write up of all your M60 work? - 740gti 2010-06-17 19:14:34 (81 views)

Fuel line sizes used on a '90 750il ??? - ourv12 2010-06-16 16:31:58 (94 views)
- BMW brand 8mm fuel hose - Patrick C 88 750 170K 2010-06-17 14:19:00 (116 views)
  - I use 5/16' fuel injector rated hose (nt) - rv8flyboy 2010-06-17 17:53:39 (81 views)
- Re: Fuel line sizes used on a '90 750il ??? - htrdbmr 2010-06-17 13:14:36 (80 views)
- Re: Fuel line sizes used on a '90 750il ??? - bimmermeister 2010-06-16 23:41:35 (101 views)

Pressurize the water system - trades707 2010-06-16 15:09:38 (101 views)
- Re: Pressurize the water system - krandoc 2010-06-16 16:19:36 (94 views)
- Re: Pressurize the water system - htrdbmr 2010-06-16 15:59:43 (92 views)
  - Re: Pressurize the water system - joecer 2010-06-17 08:40:43 (85 views)

IHKA Control panel connector - 1993e32 2010-06-15 11:56:17 (97 views)
- Re: IHKA Control panel connector - jcostantino 2010-06-16 11:52:00 (101 views)
- Re: IHKA Control panel connector - jcostantino 2010-06-16 09:17:22 (83 views)
- the white connector in the middle - whiteghost 2010-06-15 15:13:27 (89 views)
  - Re: the white connector in the middle - 1993e32 2010-06-16 03:26:09 (79 views)

oil leak help! - alexd 2010-06-14 17:41:43 (107 views)
- If it is not the head gasket (url) - whiteghost 2010-06-16 01:12:07 (92 views)
- You may want to try the E21, E30, or E28 board. - bcweir750 2010-06-15 23:17:50 (79 views)
  - The E34 five series also used the M20 engine for a couple of years. (nt) - bcweir750 2010-06-15 23:19:29 (77 views)

Radio fault, - eamonn 2010-06-14 11:10:14 (95 views)
- Re: Radio fault, - eamonn 2010-06-15 06:28:12 (89 views)
- Re: Radio fault, - jcostantino 2010-06-14 23:58:02 (94 views)
- Re: Radio fault, - joecer 2010-06-14 11:27:53 (99 views)

brought a 1989 750il back to life! need parts - ohiobmw 2010-06-12 22:46:10 (164 views)
- Re: brought a 1989 750il back to life! need parts - htrdbmr 2010-06-14 15:57:56 (93 views)
  - Re: brought a 1989 750il back to life! need parts - ohiobmw 2010-06-14 23:04:31 (82 views)
- Where in TX? (nt) - beachman 2010-06-14 15:12:37 (84 views)
- Re: brought a 1989 750il back to life! need parts - joecer 2010-06-13 17:34:06 (93 views)
  - Re: brought a 1989 750il back to life - joecer 2010-06-13 17:54:13 (86 views)
- Re: need parts - joecer 2010-06-13 08:32:59 (103 views)
- Re: brought a 1989 750il back to life! need parts - froos 2010-06-13 02:16:37 (123 views)
- Re: brought a 1989 750il back to life! need parts - ohiobmw 2010-06-12 22:48:05 (121 views)
  - I'm sure you will (nt) - htrdbmr 2010-06-14 16:01:20 (98 views)

Electrical - moneyme 2010-06-13 15:02:38 (106 views)
- you can add the car details as signature - shogun 2010-06-13 23:12:07 (87 views)
- Re: Electrical - joecer 2010-06-13 17:26:40 (98 views)

Front seat replacement, question?? - Claudio 2010-06-13 00:42:09 (96 views)
- no direct fit, Claudio - shogun 2010-06-13 04:46:45 (89 views)

Power Steering Problem ! help - bmw740jor 2010-06-12 13:14:46 (73 views)
- Re: Power Steering Problem ! help (pic) - Claudio 2010-06-13 00:27:59 (73 views)
- I would lift the front end - whiteghost 2010-06-12 13:43:54 (60 views)
  - Re: I would lift the front end (pic) - dan90bmw735iguy 2010-06-12 13:52:13 (66 views)
    - yes of course - whiteghost 2010-06-12 14:03:51 (78 views)
      - could also be broken engine mounts - shogun 2010-06-12 18:13:06 (57 views)
        
        im going to check them & keep you Updated. - bmw740jor 2010-06-13 00:11:00 (52 views)
        
        the filter is at bottom of Pentosin container (url) - shogun 2010-06-13 04:44:19 (71 views)