The 6 Series E24 Forum

1978 630 CS mods...help needed - jarni2 2007-03-13 03:58:58 (484 views)
- Re: 1978 630 CS mods...help needed - winfred 2007-10-19 23:53:47 (201 views)
- Frame are different so diff wont swap. Engine & trans are doable if - bmw635 2007-03-13 12:31:46 (379 views)
  - Re: Frame are different so diff wont swap. Engine & trans are doable if - jarni2 2007-03-14 02:23:13 (409 views)
    - E12 chasis has different front cross member/ suspension mount - bmw635 2007-03-14 13:43:37 (424 views)
      - Re: E12 chasis has different front cross member/ suspension mount - jarni2 2007-03-14 16:21:47 (353 views)
      - Re: E12 chasis has different front cross member/ suspension mount - jarni2 2007-03-14 16:21:37 (418 views)
        
        What country are you in? What's availab;e in your country so I can tell you the - bmw635 2007-03-14 16:36:11 (401 views)
        
        Re: What country are you in? What's availab;e in your country so I can tell you the - jarni2 2007-03-19 16:45:23 (389 views)
        
        M90 engine is 1977-81 ( 93.5mm bore x 84mm stroke), it's the same bottom end in - bmw635 2007-03-19 18:29:50 (436 views)
        
        Re: M90 engine is 1977-81 ( 93.5mm bore x 84mm stroke), it's the same bottom end in - jarni2 2007-03-21 02:34:14 (438 views)
        
        Motronic engine will fit in L-jet car with 1 mod: feed power to DME since the (url) - bmw635 2007-03-21 13:02:30 (407 views)
        
        BTW, the E12 exhaust manifold have to be used in newer engine since the exhaust - bmw635 2007-03-19 18:35:53 (367 views)

Exhuast System - downernsp 2007-01-20 02:07:55 (425 views)
- Re: Exhuast System - downernsp 2007-09-21 23:34:56 (157 views)
- If you want to know the exact results of each mod, yes, install them separately. - DavidC 2007-01-20 02:38:26 (427 views)
  - Re: If you want to know the exact results of each mod, yes, install them separately. - downernsp 2007-01-20 04:43:48 (414 views)

Found a 1982 635Csi with strange interior... (pic) - jarni2 2007-03-28 10:15:43 (1616 views)
- Re: Found a 1982 635Csi with strange interior... - lew 2007-09-21 00:38:15 (289 views)
- 1982 635Csi would be gray market as it was not - beezer02 2007-07-09 23:01:24 (407 views)
  - Re: 1982 635Csi would be gray market as it was not - Keith in VA 2007-07-26 14:25:42 (342 views)
    - Re: 1982 635Csi would be gray market as it was not (pic) - jarni2 2007-08-03 13:15:03 (677 views)
- the top 3 pics don't show. - mrb10 2007-04-11 07:08:20 (450 views)
- Going to take some investigation. - kff 2007-03-29 08:57:56 (506 views)
  - Re: Going to take some investigation. - jarni2 2007-08-03 18:07:13 (273 views)
    - Base on the exterior, engine, and interior of the car, I'd bet it's a regular - bmw635 2007-08-04 10:47:45 (298 views)
- More pics for ID? Doesn't look like original. Euro cars did have cloth interior - bmw635 2007-03-28 11:54:48 (554 views)
  - Re: More pics for ID? Doesn't look like original. Euro cars did have cloth interior - jarni2 2007-03-28 11:59:02 (541 views)
    - The other 3 pics didn't show so I can't see. (nt) - bmw635 2007-03-28 12:39:51 (516 views)

It has to go... (url) - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2006-11-20 18:12:10 (625 views)
- Leaving the Shark culture? :-)) (nt) - bmw635 or Peter/E24 on RF. 2007-05-08 02:13:36 (267 views)
  - No, not that easy to get rid of me.. more... :-) - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-05-08 12:26:43 (297 views)
    - Re: No, not that easy to get rid of me.. more... :-) - ram635csi 2007-05-08 20:42:11 (224 views)
      - So much to say.. so little time... more... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-05-09 07:38:45 (221 views)
        
        The not so short ... short version... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-05-10 10:08:15 (247 views)
      - Look up TCD/ Turbo Charging Dynamic to see basic info. (url) - bmw635 2007-05-08 20:47:18 (346 views)
        
        Re: Look up TCD/ Turbo Charging Dynamic to see basic info. - ram635csi 2007-05-08 21:05:31 (295 views)
        
        Done research on turbo& M motor before I built the custom 3.7L normal aspirated. - bmw635 2007-05-08 22:03:16 (285 views)
        
        Re: Done research on turbo& M motor before I built the custom 3.7L normal aspirated. - ram635csi 2007-05-09 12:24:47 (232 views)
        
        There is 1 custom SC E24 using rotary style on RF. My idea is to use - bmw635 2007-05-09 20:27:01 (259 views)
        
        Re: Done research on turbo& M motor before I built the custom 3.7L normal aspirated. - ram635csi 2007-05-09 12:15:56 (247 views)
    - Good to know since I know you've been around since BCG? Know what you - bmw635 2007-05-08 20:42:06 (237 views)
- been sold... more.. - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2007-05-07 08:08:40 (257 views)

Bumper & Air Dam - downernsp 2007-03-13 23:01:41 (557 views)
- Re: Bumper & Air Dam - jamaicawi 2007-03-19 20:49:29 (447 views)
  - Re: Bumper & Air Dam - downernsp 2007-04-25 19:49:47 (332 views)
  - Re: Bumper & Air Dam - downernsp 2007-03-22 23:03:39 (392 views)

84/ 633 CSI fluid leak - pmtre 2007-02-22 11:08:05 (412 views)
- Re: 84/ 633 CSI fluid leak - pmtre 2007-04-24 06:36:13 (297 views)
- to help find the location of the leak, clean the area (url) - kff 2007-02-24 09:23:42 (361 views)
- Red is probably PS. Probably from old hoses dried up and no longer sealing @ - bmw635 2007-02-22 13:22:43 (395 views)

instrument panel problems... all the readings are wrong - jarni2 2007-04-08 01:37:13 (575 views)
- Pull the cluster- lose wires or contacts to the gauge might be pitted/ corroded. (pic) - bmw635 2007-04-08 02:53:41 (687 views)
  - Re: Pull the cluster- lose wires or contacts to the gauge might be pitted/ corroded. - jarni2 2007-04-09 03:03:39 (443 views)
    - Leak @ servo excessive pressure- bad pressure sensor. Bad servo - bmw635 2007-04-09 13:09:41 (519 views)
      - Re: Leak @ servo excessive pressure- bad pressure sensor. Bad servo - jarni2 2007-04-09 15:50:48 (479 views)
        
        If the leak of hose #5 is at the washer, it's the bad hydraulic sensor. - bmw635 2007-04-09 16:35:20 (452 views)
        
        Re: If the leak of hose #5 is at the washer, it's the bad hydraulic sensor. (url) - jarni2 2007-04-10 03:56:13 (407 views)
        
        # 2- if bad, it over pressurized the system. The brakes - bmw635 2007-04-10 11:05:15 (433 views)
        
        BTW, if the brakes only flash when stepping on the brakes then it's the bomb,not - bmw635 2007-04-10 11:12:59 (440 views)
        
        Re: BTW, if the brakes only flash when stepping on the brakes then it's the bomb,not - jarni2 2007-04-12 02:15:24 (427 views)
        
        The light on test panel is to show you it's lit( bulb is working) so that (url) - bmw635 2007-04-12 13:02:24 (483 views)
        
        I opened my instruments and removed the 2 accu batteries... - jarni2 2007-04-19 12:08:31 (371 views)
        
        Check contacts on the gauge as it could be pitted, corroded- clean contact. (nt) - bmw635 2007-04-19 13:24:38 (416 views)

Factory 635CSi E24 Wheels/Tires Metric 1983-1987 TRX OEM Chrome Wheels - gucki83 2007-04-05 01:09:25 (594 views)

Sunroof lid removal - Lucky ///ML636 2007-04-01 01:22:03 (580 views)
- ahhh finally! - Lucky ///ML636 2007-04-03 21:30:46 (439 views)
  - Yes, I think closing S/R applies to all E24/E28. Good job! - bmw635 2007-04-03 22:43:44 (388 views)
    - hehe yeah, well i disassembled the whole thing - Lucky ///ML636 2007-04-04 00:20:53 (423 views)
      - Are you guys extending SESF invite to this board or is Charlie prohibiting? :-)) (nt) - bmw635 2007-04-04 01:05:39 (376 views)
- I heard that S/R liner is problematic is you remove. Just remove the S/R seal - bmw635 2007-04-01 20:42:41 (440 views)
  - how would i remove the seal? that thing goes around the sunroof - Lucky ///ML636 2007-04-01 22:54:12 (410 views)
    - There's couple S/R related stuff here. (url) - bmw635 2007-04-02 00:55:33 (441 views)

BMW 657 Csi- LS1 (url) - bmw635 2007-04-03 20:17:38 (748 views)

Who makes the stiffest sway bars for E-24? - M.Rad. 2007-03-31 20:47:30 (404 views)
- ST has 25/19 vs the ///M5 25/18 bars - kff 2007-04-01 17:03:12 (391 views)
  - Thanks! Will look in to these! (nt) - M.Rad. 2007-04-03 05:02:10 (370 views)
- Relocate mount for M sway bar. Did you do shock & strut? (nt) - bmw635 2007-04-01 01:15:01 (344 views)

Automatic transmission problems - Lucky ///ML636 2007-01-15 01:26:08 (634 views)
- i had a similiar problem.. (nt) - delphin635 2007-03-22 15:01:43 (390 views)
  - it was the throttle angle switch.. (nt) - delphin635 2007-03-29 20:19:50 (370 views)
- You actually had a machine hook up to flush the trans? - bmw635 2007-01-15 13:01:22 (491 views)
  - Re: You actually had a machine hook up to flush the trans? - Lucky ///ML636 2007-01-15 13:09:49 (427 views)
    - Did you have this problem B4 fluid change? Doesn't sound like electronic since - bmw635 2007-01-15 13:38:23 (441 views)
      - Re: Did you have this problem B4 fluid change? Doesn't sound like electronic sin - Lucky ///ML636 2007-01-15 13:56:56 (469 views)
        
        Call Germantransmissions.com and ask for their suugestion. Also search - bmw635 2007-01-15 14:09:37 (436 views)
        
        Re: Call Germantransmissions.com and ask for their suugestion. Also search - Lucky ///ML636 2007-01-15 20:08:39 (457 views)
        
        My 89 had mechanical clutches, the trans ECU control the valve body pressure. - bmw635 2007-01-15 20:41:25 (432 views)
        
        Re: My 89 had mechanical clutches, the trans ECU control the valve body pressure - Lucky ///ML636 2007-01-15 20:52:08 (450 views)

Bumper Fillers - asid 2007-03-22 12:21:36 (455 views)
- Front top bumper cover? I got 'em. (pic) - bmw635 2007-03-22 13:41:26 (525 views)
  - Re: Front top bumper cover? I got 'em. - asid 2007-03-28 12:17:46 (419 views)
    - Side bumper cover? US or Euro? 88-89 or pre-87? (nt) - bmw635 2007-03-28 12:38:52 (400 views)
      - Re: Side bumper cover? US or Euro? 88-89 or pre-87? - asid 2007-03-29 12:55:26 (376 views)
        
        Check Ebay as there's 2 cars being parted. (nt) - bmw635 2007-03-29 14:39:17 (390 views)

Got mine from BavAuto - '85 635 (nt) - yooper 2007-03-29 10:41:17 (382 views)
- Sorry. Should have been posted under bumper ends. (nt) - yooper 2007-03-29 10:42:25 (364 views)

Just installed M5 rearview mirror w/maplights.... - m6ermike 2007-03-25 22:54:09 (407 views)
- Gonna be driving around with the map lights on whether needed or not - kff 2007-03-27 16:22:42 (386 views)

Shameless plug - bfons 2007-02-13 15:12:02 (468 views)
- Yup, that's shameless, could at least donate to this board and - LJBimmers 2007-03-24 23:37:00 (377 views)
- Pretty shameless but don't you think you could have - kff 2007-02-13 20:59:00 (444 views)

Great White Shark sighting... (pic) - cfisher 2007-03-23 14:47:30 (723 views)
- Nice! there's a SharkFest Celebration in GA- April 20 (url) - bmw635 2007-03-23 17:14:19 (392 views)

1977 rear speakers - cruise 2007-03-15 20:50:05 (391 views)
- 87-89 635/ L6 has the Bose installed with large grill- check Ebay @ $150- pair. - bmw635 2007-03-16 00:12:42 (398 views)

BMW M635CSi Brake issues - yeshal9000 2007-03-03 21:55:39 (601 views)
- Re: BMW M635CSi Brake issues (pic) - yeshal9000 2007-03-12 16:53:30 (536 views)
- Did you empty the bomb before servicing? - stevebu 2007-03-08 08:50:58 (460 views)
  - Good point- for got about releasing pressure in bomb prior to job. (nt) - bmw635 2007-03-08 14:49:33 (435 views)
- Care to explain more details? You're not suppose to mess with the accumulator - bmw635 2007-03-04 02:31:36 (431 views)
  - Re: Care to explain more details? You're not suppose to mess with the accumulator - yeshal9000 2007-03-05 00:06:11 (471 views)
    - Are you in US? Email me # and time to call. Still not sure what - bmw635 2007-03-05 01:00:21 (410 views)
- Re: BMW M635CSi Brake issues (pic) - yeshal9000 2007-03-03 21:58:15 (587 views)

1 of a kind 635! (url) - bmw635 2007-02-26 22:23:10 (711 views)
- We sure are thankful for that ! - CUPDGRA 2007-03-03 11:42:07 (467 views)
- Re: 1 of a kind 635! - downernsp 2007-02-28 17:42:19 (414 views)
- EWWWWWWWW! (nt) - LJBimmers 2007-02-27 11:06:31 (403 views)

Changing gear shift knob - glenbadham 2007-02-09 19:19:14 (578 views)
- It helps if you have armrests. but it can be done without them - kff 2007-02-10 10:52:23 (514 views)
  - Thats horrible kff (nt) - crovensto 2007-02-24 18:15:06 (414 views)
    - BTDT, I was the one laughing. (nt) - kff 2007-02-25 21:13:13 (405 views)
      - I was the one crying- - stevebu 2007-02-27 08:46:15 (389 views)

$35 chip wakes up 635CSi - M.Rad. 2007-01-28 14:05:37 (708 views)
- are u sure its not just in ur head? (nt) - tp88 2007-02-01 00:25:55 (438 views)
  - The chip.....? Naw, the Guv'mint aint that far along yet!! (nt) - M.Rad. 2007-02-01 21:52:22 (477 views)
    - so is ur governor gone? (nt) - tp88 2007-02-10 13:47:32 (417 views)
      - Naw, they re-elected the bum! Oh, you mean.... - M.Rad. 2007-02-10 22:39:31 (414 views)
        
        well, i have a e23, and I have seen the same chip for it.. (pic) (url) - tp88 2007-02-11 11:25:33 (471 views)
        
        Yeah, go for it. It's not a huge amount of money, and it is noticeable. - M.Rad. 2007-02-17 22:59:03 (326 views)
        
        No governor that I am aware of in my previous 89 635. I hit 150+ with stock eng. (nt) - bmw635 2007-02-11 02:47:51 (444 views)
        
        How long did it take to reach that speed? (nt) - M.Rad. 2007-02-17 22:56:36 (371 views)
        
        Don't remember but it's almost same accel rate as my 7. (nt) - bmw635 2007-02-20 01:40:18 (421 views)

OT: TwinTurbo Alpina 635 w/550hp. (url) - bmw635 2007-02-06 00:31:32 (853 views)
- Julian has done a nice job on that car. - kff 2007-02-07 15:39:06 (389 views)
  - He got another Euro project starting- inteteresting to see what it will be! (nt) - bmw635 2007-02-08 12:49:25 (408 views)
- Re: OT: TwinTurbo Alpina 635 w/550hp. - downernsp 2007-02-07 01:47:25 (457 views)
- 635s you never see. (url) - bmw635 2007-02-06 01:02:28 (550 views)

Wheel's - downernsp 2007-02-07 01:58:47 (502 views)
- Wheel tutorial for the E28 (url) - kff 2007-02-07 15:34:46 (541 views)
- Any wheels from E28, E24, E23 will fit with existing tires. Rims from - bmw635 2007-02-07 13:26:13 (599 views)

Need help with 1984 633 csi - joshdkline 2007-01-23 16:22:41 (434 views)
- find the current draw on the system when the car is - kff 2007-01-23 16:32:05 (537 views)
  - Does it die while running at all? - ky7s 2007-02-04 14:47:17 (419 views)
- Load test alternator? Did you make sure all the terminals at - bmw635 2007-01-23 16:31:25 (451 views)

REMINDER - HID Kit Group Buy is ending. - Draleu 2007-01-26 13:53:29 (357 views)

Looking for air-dam brackets... - mrad 2007-01-25 21:58:10 (381 views)

Sharks of 2007 Calendar - bfons 2007-01-07 21:53:52 (486 views)
- BFons is a very reputable & longtime member on the 'other' forum. I trust him! (nt) - bmw635 2007-01-23 16:28:47 (385 views)
- I just ordered one. Looks great! (nt) - DavidC 2007-01-08 00:45:05 (358 views)
  - Did you receive it OK? (nt) - bfons 2007-01-23 15:17:49 (389 views)

Group Buy - HID Conversion Kits - Ends 1/29 and 2/5 (url) - Draleu 2007-01-22 17:18:32 (343 views)

Update - HID Conversion Kit for 7" and 5.25" headlights - Teaser (pic) - Draleu 2007-01-18 20:31:31 (583 views)
- Re: Update - HID Conversion Kit for 7 - m6ermike 2007-01-21 09:04:42 (466 views)
  - Yes it will work on ellipsoid headlight with no cutoff or glare issues. (url) - Draleu 2007-01-21 14:15:44 (411 views)
    - Here's some pics of ellipsoid projector headlight with the HID kit (pic) - Draleu 2007-01-21 23:23:12 (480 views)
- 100W H4 compare to HID 35W (pic) - Draleu 2007-01-21 02:24:43 (477 views)

Southeast SharkFest @ Biltmore Estate (url) - bmw635 2007-01-19 02:10:26 (408 views)

Any thoughts? (url) - sandman512 2007-01-13 12:09:05 (419 views)
- Yes, - kff 2007-01-13 14:29:52 (406 views)
  - Re: Yes, - sandman512 2007-01-13 19:09:44 (321 views)

628csi question - pkbinplano 2007-01-06 11:00:02 (480 views)
- More details? What year? How's condition? You can swap that 2.8 with the latest - bmw635 2007-01-07 03:18:27 (445 views)
- If the body is rust-free, that sounds like a reasonable price - DavidC 2007-01-06 17:46:18 (456 views)
  - Re: If the body is rust-free, that sounds like a reasonable price - pkbinplano 2007-01-07 12:59:20 (398 views)
    - The diff mount rot is common, weld a meatl plate on & reweld the mount. - bmw635 2007-01-08 12:24:23 (444 views)

SFW 2007 in Vegas....again! - eurowannabe 2007-01-05 18:26:09 (428 views)
- Shark meet Whale or Shark only? :-))) (nt) - bmw635 2007-01-07 03:16:31 (350 views)
  - Re: Shark meet Whale or Shark only? :-))) - eurowannabe 2007-01-08 12:11:49 (402 views)

6 Series Poster PRESALE ends this week... (url) - bfons 2006-12-11 12:29:15 (514 views)
- The poster is here...Pics (pic) - bfons 2006-12-15 16:12:20 (617 views)
  - Re: The poster is here...Pics - downernsp 2007-01-05 02:28:31 (418 views)
    - Mine arrived this week. Already framed and hung in the garage. (pic) - DavidC 2007-01-05 05:02:59 (469 views)
      - Looking good!!!! (nt) - bfons 2007-01-07 21:55:25 (345 views)

Alpina wheels, staggered set, on the 'bay' 270076707612 (nt) - CUPDGRA 2007-01-06 14:41:42 (474 views)

1979 635Csi Euro Import - downernsp 2006-12-30 15:42:55 (641 views)
- What do you want to know? I've had 79 Euro 635 Alpina, 80 US 635 - bmw635 2006-12-31 02:47:39 (547 views)
  - Re: What do you want to know? I've had 79 Euro 635 Alpina, 80 US 635 - downernsp 2007-01-02 01:38:13 (494 views)
    - Re: What do you want to know? I've had 79 Euro 635 Alpina, 80 US 635 - kff 2007-01-02 11:34:28 (397 views)
      - Re: What do you want to know? I've had 79 Euro 635 Alpina, 80 US 635 - downernsp 2007-01-05 01:23:42 (392 views)
        
        There's a good mechanic in Huntington Beach that couple local guys used but this - bmw635 2007-01-05 01:31:10 (433 views)
        
        Re: There's a good mechanic in Huntington Beach that couple local guys used but this - downernsp 2007-01-05 02:07:37 (369 views)
        
        The meet is every Sat. I've done almost everything on the 6 so let me know what - bmw635 2007-01-05 11:58:23 (358 views)
      - Mesa Performance also have new & used E24/ E28 parts also. - bmw635 2007-01-02 13:25:40 (580 views)
        
        Re: Mesa Performance also have new & used E24/ E28 parts also. - downernsp 2007-01-05 01:27:57 (342 views)
        
        Come to the Sat 7-9 meet @ Irvine Spectrum, in the Mazda NA parking lot- you'll - bmw635 2007-01-05 01:34:29 (405 views)
        
        Re: Come to the Sat 7-9 meet @ Irvine Spectrum, in the Mazda NA parking lot- you'll - downernsp 2007-01-05 02:08:49 (321 views)

Mulholland Car Show & Cruise in Los Angeles. (url) - bmw635 2007-01-05 01:44:04 (403 views)

Need Review Info 1982 633CSi - themelmaan2000 2006-12-24 05:50:40 (519 views)
- Re: Need Review Info 1982 633CSi - kff 2006-12-24 10:47:21 (456 views)
  - This links has info on what to look for & everything you want to know E24. (url) - bmw635 2006-12-25 02:22:34 (481 views)

technical library for DIY (url) - shogun 2006-12-22 01:02:53 (630 views)
- Nice so I'll add a link for the ETMs, Happy Holidays (url) - kff 2006-12-22 23:01:55 (467 views)
  - whow, that covers 1982-2005, thanks (nt) - shogun 2006-12-24 00:26:07 (418 views)

Euro Front Bumper & Air Dam assembly available - CUPDGRA 2006-12-13 12:32:55 (615 views)

All the 6ser artciles available: (url) - bmw635 2006-12-08 00:19:31 (580 views)
- Thanks for that. Now there is a book on the Christmas list. (nt) - kff 2006-12-10 21:20:12 (384 views)

Looking for a set of BBS three piece wheels for an e23, figured - chad20 2006-12-09 01:14:00 (569 views)

Front/rear strut braces group buy at bigcoupe.com - chevale 2006-12-04 17:14:15 (718 views)
- link inside (url) - chevale 2006-12-04 17:15:01 (436 views)
  - do you have a pix of rear brace? (nt) - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2006-12-06 09:12:11 (394 views)
    - Re: do you have a pix of rear brace? (pic) - chevale 2006-12-07 14:43:24 (538 views)

OT- E24 poster. (pic) - bmw635 2006-12-03 01:55:54 (920 views)
- 24' x 36' 6 Series Poster - Presale - bfons 2006-12-05 17:33:39 (459 views)
  - You can post link on this board, unlike 'the other board'! :-)))) (url) - bmw635 aka Peter/ E24 2006-12-06 02:35:06 (470 views)
- Lame! Simply because my M6 isn't on there (pic) - Tony K 2006-12-03 16:38:19 (635 views)
  - Damn thats a purdy 6!!! (nt) - SaVas 2006-12-03 16:59:18 (462 views)
- SWEEEEEEEET! - SaVas 2006-12-03 13:04:01 (486 views)

86 635 is dead - scotts 2006-12-02 19:29:08 (641 views)
- Seperate all the wires going to 2 battery post & clean real good. Corrosion in - bmw635 2006-12-02 19:53:22 (533 views)
  - Re: Seperate all the wires going to 2 battery post & clean real good. Corrosion in - scotts 2006-12-02 20:17:43 (485 views)
    - Yes, check on BigCoupeGroup, I post link on this forum, - bmw635 2006-12-04 02:17:00 (627 views)

Grills - raymasten 2006-11-30 00:24:22 (336 views)
- Try the salvage companies listed on e38.org (url) - DavidC 2006-11-30 04:20:50 (380 views)
  - Re: Try the salvage companies listed on e38.org - raymasten 2006-12-01 18:19:43 (373 views)
    - Seen my post on removing the OBC? Once it's out, bulbs are - bmw635 2006-12-02 02:04:16 (530 views)
  - or Ebay- these are hard to come by. Check dealer? (nt) - bmw635 2006-11-30 11:37:09 (367 views)

Looking for Twin Turbo kit for 635? (url) - bmw635 2006-12-01 16:09:58 (588 views)

Visit the BimmerBoard Store on Amazon.com!

Anyone with a Big Diff 3.46 wishing to trade to a Big Diff 3.91? - Draleu 2006-11-20 01:45:13 (551 views)
- Can you explain the reason for trade? (+) - chevale 2006-11-22 12:49:33 (410 views)
  - Re: Can you explain the reason for trade? (+) - Draleu 2006-11-27 16:44:22 (529 views)
    - BTW this is going with auto tranny on my 745i so it may not apply in your case. (nt) - Draleu 2006-11-27 18:53:54 (434 views)
- Throw that on Ebay- you'll get more for the 3.91LSD & buy the 3.46. (nt) - bmw635 2006-11-20 01:50:03 (432 views)

Dash lights - raymasten 2006-11-14 23:57:14 (732 views)
- The cluster can be removed with 2 screws mounted upside down at top of (url) - bmw635 2006-11-15 00:59:08 (530 views)
  - Ooooppps, that's E38. Here's how on E24. (pic) - bmw635 2006-11-15 17:04:12 (820 views)
    - Re: Ooooppps, that's E38. Here's how on E24. - raymasten 2006-11-25 13:55:19 (505 views)
      - OBC back light replacement: remove radio, lower glove box from suspension, - bmw635 2006-11-25 14:39:35 (682 views)
    - Re: Ooooppps, that's E38. Here's how on E24. - raymasten 2006-11-18 17:20:05 (417 views)
      - Are you in S CA? There's a large group of 6ser guys here. (url) - bmw635 2006-11-18 19:48:09 (509 views)
        
        Re: Are you in S CA? There's a large group of 6ser guys here. - raymasten 2006-11-19 00:31:46 (434 views)
        
        There was a big one this morning @ Irvine Spectrum- see link in post above. (nt) - bmw635 2006-11-19 00:46:09 (434 views)

Buying a 635CSi - 9572ac 2006-11-23 11:51:30 (486 views)
- Re: Buying a 635CSi (url) - kff 2006-11-23 19:42:55 (537 views)
  - or look on here- has everything you need to know. (url) - bmw635 2006-11-24 01:56:20 (466 views)

6er Rear Strat Removal - marik 2006-11-06 17:41:57 (555 views)
- Hit the bottom mount inward as the shock is slid on to the sleeve - bmw635 2006-11-06 18:11:40 (489 views)
  - Re: Hit the bottom mount inward as the shock is slid on to the sleeve (nt) - 9572ac 2006-11-23 11:50:42 (298 views)
  - Buying a 83 635CSi - 9572ac 2006-11-23 11:50:36 (324 views)
  - Re: Hit the bottom mount inward as the shock is slid on to the sleeve - marik 2006-11-06 18:24:53 (374 views)
    - You have to remove the bottom to lower it to clear the top. Does it - bmw635 2006-11-06 18:36:57 (430 views)
      - Not sure if I can explain it clearly with not pics, but - marik 2006-11-06 18:47:10 (527 views)
        
        10 more minutes of hummering and the darn thing is - marik 2006-11-06 21:41:15 (519 views)
        
        Glad it worked! (nt) - bmw635 2006-11-07 17:11:48 (364 views)
        
        Well, now the rear passenger side (where I had - marik 2006-11-15 01:25:00 (381 views)
        
        Tighten the spring seats to shock? Tighten the top shock mount to car body? (nt) - bmw635 2006-11-15 12:41:28 (543 views)
        
        Yep! Today checked everything and just in case - marik 2006-11-15 20:31:33 (357 views)
        
        Didn't have this noise until after parts replacement? - bmw635 2006-11-16 00:47:46 (385 views)
        
        The noise started after shock replacement. The - marik 2006-11-16 01:26:30 (337 views)
        
        The only thing I can think of is the 45 min hammering w/ 5lb hammer - bmw635 2006-11-16 11:28:22 (477 views)

blower temp control problem - e24fb 2006-11-10 08:43:46 (594 views)
- IF... - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2006-11-20 18:17:59 (399 views)
  - another common source of difficulty is.. - johnhstein, 85-M6CSi, 85 745i & 84 633CSi 2006-11-21 14:28:14 (489 views)
- The heater on all the time is a sign that the heater control - kff 2006-11-10 09:56:34 (457 views)

Map for fuse/relay box - wg 2006-11-01 23:37:39 (3259 views)
- Look up BCG to see if it's there. (url) - bmw635 2006-11-02 00:50:06 (961 views)
  - Re: Look up BCG to see if it's there. - wg 2006-11-02 06:14:37 (656 views)
    - Here is a link to some diagrams... (url) - stugilmour 2006-11-17 20:27:32 (925 views)
      - Stu, R U from RF? Peter/ E24 on RF. May be bring the crew over - bmw635 2006-11-18 00:44:10 (585 views)

Newport Beach,CA Car & Coffee Sponsored by Ford PAG. (url) - bmw635 2006-11-07 23:41:19 (488 views)
- There will be an exclusive BMW E24/ 6 ser with 20+ cars. Let me know - bmw635 2006-11-08 23:19:39 (435 views)
  - There will be an exclusive BMW E24/ 6 ser PARKING with 20+ cars (nt) - bmw635 2006-11-08 23:20:29 (383 views)

Steering problems. - marik 2006-11-08 12:51:44 (446 views)
- Check steering box mount as that could be cracked. There's a fix - bmw635 2006-11-08 19:46:31 (448 views)
  - The subframe is new, replaced about 10K ago, right - marik 2006-11-08 23:13:08 (408 views)
    - Check aligment? Did you tighten all the screw on the telescopic steering column? - bmw635 2006-11-08 23:18:28 (394 views)

Like this site? Get a Roundel next to yours like mine. :-))) (url) - bmw635 2006-11-07 19:46:32 (447 views)

Fast 6 (pic) (url) - bmw635 2006-11-02 13:43:38 (757 views)

What is the answer - roddywessy 2006-11-01 11:12:25 (429 views)

are you kiddin' me? I'd jump on it if it's really just a fuel pump (nt) - CUPDGRA 2006-10-29 23:54:00 (579 views)
- Re: are you kiddin' me? I'd jump on it if it's really just a fuel pump - sandman512 2006-10-31 00:01:27 (449 views)
  - Re: are you kiddin' me? I'd jump on it if it's really just a fuel pump (pic) - sandman512 2006-10-31 00:03:45 (439 views)
    - Sounds like good deal! (nt) - bmw635 2006-10-31 03:31:48 (430 views)

How much do you guys think a engine/trans combo is worth - bavarian735 2006-10-30 07:14:42 (347 views)

Found this E24, any thoughts (pic) - sandman512 2006-10-29 01:40:43 (793 views)
- 119,000 miles is a car that is gonna fall right into the RULE - kff 2006-10-29 02:40:12 (613 views)
  - Re: 119,000 miles is a car that is gonna fall right into the RULE - sandman512 2006-10-29 02:59:28 (454 views)
    - Provide details, I'll give you the run down. Had 4-635, restored 1 ground up, - bmw635 2006-10-29 12:08:06 (637 views)

E24 meet every Wed in San Diego (url) - bmw635 2006-10-26 11:27:01 (549 views)

635CSi temp guage - kmckenzie 2006-10-24 22:42:49 (468 views)
- Re: 635CSi temp guage - cw6er 2006-10-25 14:05:17 (367 views)
  - Re: 635CSi temp guage - kmckenzie 2006-10-26 02:51:02 (504 views)
  - Another indication of bad battery/ SI board is the flickering OIL/ INSP light. (nt) - bmw635 2006-10-26 00:39:10 (445 views)
- Re: 635CSi temp guage (nt) - kmckenzie 2006-10-24 22:44:00 (412 views)

E24 650 V12? (pic) - bmw635 2006-10-20 18:37:51 (677 views)