The 7 Series E23 Forum

Issues with '84 733i - dirtytaylor 2011-01-16 22:39:59 (3218 views)
- first things to check.... - johnhstein, 85-M6CSi, 85 745i 2011-01-17 12:15:37 (3172 views)
  - Speaking of the Bentley (url) - datcord 2011-01-17 12:49:08 (3238 views)
    - Re: Speaking of the Bentley - danno2cu 2011-10-11 11:48:43 (42 views)
- Idle suggestion... - datcord 2011-01-17 08:38:18 (3185 views)

Any cluster pros out there? - stevebu 2011-01-27 19:41:41 (3387 views)
- Some pointers. I have a PHD (piled higher and deeper) in clusters - Vern 2011-01-29 01:38:08 (3313 views)
  - Vern, you've helped me before- - stevebu 2011-01-29 10:31:45 (3257 views)
    - Wow, doing a search over on Roadfly- - stevebu 2011-01-29 10:58:37 (3253 views)
      - The speedo won't make a difference...the number 7313 - Vern 2011-01-30 20:44:26 (3213 views)
        
        Thanks for the info Vern - stevebu 2011-01-31 13:11:54 (3235 views)
        
        Steve, I may be off on the 7313 vs. 7313 EG...7522 is one thing - Vern 2011-02-01 02:04:02 (3219 views)
        
        I'm a knucklehead- - stevebu 2011-02-02 13:46:37 (3244 views)
        
        Not quite fixed-but enough for now- - stevebu 2011-02-05 19:41:22 (2044 views)
        
        Swapped out 733 fuel guage- - stevebu 2011-04-05 19:36:55 (218 views)
        
        I think another knucklehead is about to check his this weekend. - demet 2011-02-02 18:57:16 (3185 views)
        Good deal! From one knucklehead to another (nt) - Vern 2011-02-02 14:41:18 (3212 views)
  - Re: Some pointers. I have a PHD (piled higher and deeper) in clusters - Hitmanx 2011-01-29 03:32:49 (3210 views)
    - Eric, take the working speedo out of that cluster and - Vern 2011-01-31 01:40:29 (3248 views)
      - Re: Eric, take the working speedo out of that cluster and - Hitmanx 2011-02-03 18:49:27 (2008 views)
        
        Re: Eric, take the working speedo out of that cluster and - Hitmanx 2011-02-20 11:25:31 (1399 views)
        
        Good feeling isn't it! (nt) - stevebu 2011-02-20 12:25:45 (1387 views)
        
        Re: Good feeling isn't it! - Hitmanx 2011-02-21 09:37:00 (1388 views)
      - Re: Eric, take the working speedo out of that cluster and - Hitmanx 2011-02-02 00:58:26 (3219 views)
- Re: Any cluster pros out there? - BigBruce 2011-01-28 11:54:20 (3268 views)
  - Hey Bruce- (pic) - stevebu 2011-01-28 14:48:45 (3299 views)
    - My OBC fuel consumption never worked... - demet 2011-01-28 15:18:53 (3238 views)
      - That's what kills me- - stevebu 2011-01-28 18:46:02 (3282 views)
- Re: Any cluster pros out there? - Hitmanx 2011-01-27 19:56:36 (3257 views)
  - Two ribbon cables on the SI board- - stevebu 2011-01-27 20:38:16 (3509 views)
    - WRONG -Correction - stevebu 2011-01-28 08:10:18 (3190 views)
    - Re: Two ribbon cables on the SI board- - microcat36 2011-01-28 05:11:08 (3207 views)
      - No, I couldn't - stevebu 2011-01-28 06:25:50 (3257 views)

Hard to start when cold... - ssf1342 2011-01-22 22:26:59 (3219 views)
- Re: Hard to start when cold... - Hitmanx 2011-02-09 18:34:31 (1941 views)
  - The Gross Polluter... - ssf1342 2011-03-15 01:47:25 (145 views)
  - Since I got rear-ended earlier today... - ssf1342 2011-02-27 22:16:15 (766 views)
- Re: Hard to start when cold... - gring 2011-02-02 00:59:10 (3130 views)
  - I do notice that... - ssf1342 2011-02-04 20:07:52 (1928 views)
    - Re: I do notice that... - gring 2011-02-04 20:33:05 (1936 views)
      - I disconnected... - ssf1342 2011-02-07 09:30:24 (1957 views)
      - Sometimes it struggles to crank... - ssf1342 2011-02-05 13:57:45 (1947 views)
        
        Re: Sometimes it struggles to crank... - docevil 2011-02-28 00:29:26 (781 views)

I won bav auto's photo contest for e23 - 06impreza 2011-01-14 15:14:52 (3292 views)
- Got my picture frame with winning photo in it (pic) (url) - 06impreza 2011-03-12 20:33:24 (163 views)
- It's posted on facebook for now.. (url) - 06impreza 2011-02-21 19:40:07 (762 views)
- Well done! Congrats! (nt) - datcord 2011-01-17 14:03:14 (3167 views)
- Re: I won bav auto's photo contest for e23 - Hitmanx 2011-01-16 04:46:13 (3170 views)
- Re: I won bav auto's photo contest for e23 - oldsurge 2011-01-14 23:32:38 (3205 views)
  - Well it'll be only e23.. Easy to find.. But I think it was these one.. (pic) (url) - 06impreza 2011-01-15 01:24:14 (3407 views)
    - Re: Well it'll be only e23.. Easy to find.. But I think it was these one.. - oldsurge 2011-01-19 11:55:06 (3200 views)
    - Those blacked out turn sigs are the shitz...Sweet. Are - tranmkp 2011-01-19 10:04:43 (3180 views)
      - Thanks man. They are lamin-x covers. (nt) - 06impreza 2011-01-19 19:17:39 (3147 views)
    - It's hard to look at that picture without smiling (nt) - jason733i 2011-01-15 10:23:51 (3174 views)
- Congrats! You spent a lot of time on that one. (nt) - demet 2011-01-14 21:27:18 (3179 views)
- Well there you go. Now you have a cert for some parts. (nt) - kff 2011-01-14 16:50:22 (3199 views)

Oil Filter housing e23 vs e32 (pic) - sharknosel7 2011-01-06 00:57:13 (4725 views)
- Don't start your car yet- - stevebu 2011-01-06 06:52:58 (4542 views)
  - Here's some reading: - stevebu 2011-01-06 07:06:39 (4446 views)
    - Re: Here's some reading: - sharknosel7 2011-01-07 00:00:37 (4377 views)
      - I didn't quite understand it all- - stevebu 2011-01-07 13:39:56 (4390 views)
        
        Re: I didn't quite understand it all- - sharknosel7 2011-01-07 14:34:06 (4405 views)
    - Re: Here's some reading: (url) - microcat36 2011-01-06 07:17:02 (4337 views)
      - Re: Here's some reading: - microcat36 2011-01-06 07:18:50 (4429 views)
        
        Re: Here's some reading: (pic) - sharknosel7 2011-03-07 00:06:06 (194 views)
        Re: Here's some reading: - sharknosel7 2011-01-07 22:05:59 (3792 views)

Lowering springs - sharknosel7 2011-01-05 23:42:53 (4615 views)
- Re: Lowering springs - Hitmanx 2011-01-06 13:06:09 (4503 views)
- Re: Lowering springs - Hitmanx 2011-01-06 13:06:02 (4453 views)
  - Re: Lowering springs - sharknosel7 2011-01-07 22:29:57 (3856 views)
    - Re: Lowering springs - Hitmanx 2011-01-07 22:56:29 (3848 views)
- As long as you ordered the correct springs- - stevebu 2011-01-06 06:57:11 (4609 views)
  - Re: As long as you ordered the correct springs- - sharknosel7 2011-01-06 12:48:41 (4511 views)
    - Question for sharknose: - ralph524 2011-01-14 15:34:45 (2661 views)
      - Re: Question for sharknose: - sharknosel7 2011-01-15 01:16:44 (2723 views)
        
        Re: Question for sharknose: - ralph524 2011-01-20 14:11:39 (2662 views)
        
        Re: Question for sharknose: - sharknosel7 2011-01-21 00:02:55 (2649 views)
        
        Re: Question for sharknose: - ralph524 2011-01-31 21:53:03 (2649 views)
        
        Re: Question for sharknose: (pic) - sharknosel7 2011-02-11 00:14:23 (1461 views)
        
        Some pics didn't load here they are (pic) - sharknosel7 2011-02-11 00:17:38 (1486 views)
        
        what shocks did you use? - stosich 2011-02-11 10:04:43 (1376 views)
        
        Re: what shocks did you use? - sharknosel7 2011-02-11 23:14:42 (1403 views)
        
        How does she ride and handle on the sport springs? - phathome 2011-02-11 04:06:20 (1375 views)
        
        Re: How does she ride and handle on the sport springs? - sharknosel7 2011-02-12 01:46:21 (1422 views)
        
        Some pictures from the upgrades (pic) - sharknosel7 2011-02-12 01:53:18 (1506 views)
        
        How the hell did the swing arm bracket break? (nt) - stevebu 2011-02-12 09:42:12 (1408 views)
        
        Re: How the hell did the swing arm bracket break? - sharknosel7 2011-02-13 01:26:47 (1403 views)
        
        More pictures of the repairs and upgrades (pic) - sharknosel7 2011-02-13 13:28:26 (1510 views)
        
        Think about doing this... - ericcue 2011-02-14 02:03:00 (1419 views)
        
        Re: Think about doing this... (pic) - sharknosel7 2011-02-15 00:11:34 (766 views)
        
        Your rear subframe already has the mounts? - ericcue 2011-02-15 02:21:53 (768 views)
        
        Re: Your rear subframe already has the mounts? - sharknosel7 2011-02-15 16:27:12 (751 views)
        Correct- - stevebu 2011-02-15 06:43:09 (772 views)
        
        Re: Correct- - sharknosel7 2011-02-15 16:30:56 (742 views)
        
        I have some aftermarket sway bars that I will part with - ralph524 2011-02-28 08:20:04 (158 views)
        Sorry no pics- - stevebu 2011-02-17 18:38:11 (723 views)
        
        Re: Question for sharknose: - sharknosel7 2011-02-01 00:57:39 (2590 views)

Hello new thumping noise, what are you from? - datcord 2011-01-07 08:19:22 (4436 views)
- UPDATE: Yeah, it was the center bearing. - datcord 2011-02-28 07:04:35 (754 views)
- any chance of a build-up of some sort on the rim - johnhstein, 85-M6CSi, 85 745i 2011-01-14 08:27:11 (3223 views)
  - Good advice.... - datcord 2011-01-15 17:51:56 (3242 views)
    - One last comment.... - johnhstein, 85-M6CSi, 85 745i 2011-01-17 12:26:44 (3211 views)
    - raise the front end and look for 'run-out' - johnhstein, 85-M6CSi, 85 745i 2011-01-17 12:22:46 (3166 views)
      - Even new tires can be 'out of round' .... and yes.... - johnhstein, 85-M6CSi, 85 745i 2011-01-17 17:38:22 (3164 views)
      - Re: raise the front end and look for 'run-out' - datcord 2011-01-17 12:42:00 (3244 views)
- Center support bearing for the drive shaft. - Vern 2011-01-13 01:31:46 (3220 views)
  - Re: Center support bearing for the drive shaft. - datcord 2011-01-13 07:13:50 (3223 views)
- How are your brakes? (nt) - jason733i 2011-01-07 12:48:36 (4402 views)
  - Brand new on the front, less than a year old on the back. (nt) - datcord 2011-01-07 14:55:59 (4334 views)
    - May be parking brake shoe anchors. - peeeot 2011-01-07 18:28:09 (4378 views)
      - Backing plates are good, applying the parking brake doesn't change the noise - datcord 2011-01-12 08:26:39 (3169 views)
- Addendum: Whatever it is, it isn't adding to steering/ride vibrations, either. (nt) - datcord 2011-01-07 08:26:33 (4379 views)

Rear Bumper straightening (pic) - microcat36 2011-01-19 16:52:09 (3364 views)
- Hey Colin, I've got some bumper irons for you, if yours are bent (pic) - phathome 2011-02-01 05:37:11 (3161 views)
  - Those look like- - stevebu 2011-02-01 14:58:35 (3128 views)
    - OT, but euro bumpers allowed me to make a tow hitch.. (pic) - demet 2011-02-03 14:00:31 (1958 views)
- I can't speak for the euro bumpers, but the US bumpers will come right out - jason733i 2011-01-19 19:13:08 (3184 views)
  - Re: I can't speak for the euro bumpers, but the US bumpers will come right out - microcat36 2011-01-19 19:25:51 (3195 views)
    - Well... to get the US piece of 17 off... you need to take the bumper off first - jason733i 2011-01-19 21:24:42 (3169 views)
      - Re: Well... to get the US piece of 17 off... you need to take the bumper off first - sharknosel7 2011-01-20 00:45:29 (3171 views)
        
        some pictures (pic) - microcat36 2011-01-20 06:05:14 (3271 views)
        
        Did a bit of panel beating today (pic) - microcat36 2011-01-24 10:10:43 (3230 views)
        
        Looks good! (nt) - jason733i 2011-01-24 20:32:55 (3123 views)
        
        The rear bumper is a piece of cake to take off, so you might as well do it - jason733i 2011-01-20 09:24:09 (3178 views)
        I've had a proper look - microcat36 2011-01-20 07:05:46 (3187 views)
        
        I will take it off tommorow (pic) - microcat36 2011-01-20 11:40:07 (3262 views)
        
        Re: I will take it off tommorow - sharknosel7 2011-01-21 00:20:43 (3178 views)

a slightly off-topic rant - euro735i 2010-12-31 00:49:12 (3982 views)
- Here's my two cents worth...Gov'ment Motors and Scheissler took the bailout - Vern 2011-02-02 22:55:56 (1977 views)
- Re: a slightly off-topic rant - madmal 2011-01-26 07:58:53 (1994 views)
- Haha... - jason733i 2010-12-31 15:09:29 (3967 views)
- Re: a slightly off-topic rant - limeyexpat 2010-12-31 10:04:10 (3976 views)

My 5 speed transmission is having major issues... - jason733i 2010-12-21 10:35:59 (3424 views)
- Re: My 5 speed transmission is having major issues... - tolynty 2011-01-17 13:04:04 (1511 views)
  - Re: My 5 speed transmission is having major issues... - labimmer 2011-01-31 12:46:35 (1403 views)
  - I'm interested if it fits my car. Does anybody know if a 265/6 is going to fit - jason733i 2011-01-18 10:02:25 (1470 views)
    - Re: I'm interested if it fits my car. Does anybody know if a 265/6 is going to fit - Hitmanx 2011-01-18 15:59:54 (1470 views)
      - I really don't want to have to modify what's already there to swap them out, - jason733i 2011-01-19 09:00:03 (1424 views)
        
        Re: I really don't want to have to modify what's already there to swap them out, - labimmer 2011-01-31 14:47:18 (1425 views)
        
        getrage 260 (url) - labimmer 2011-01-31 15:02:12 (1404 views)
        
        I'm thinking about it. How much do you want for it? - jason733i 2011-02-01 12:15:13 (1408 views)
        
        Re: I'm thinking about it. How much do you want for it? - labimmer 2011-02-01 15:25:27 (1371 views)
        
        Re: I'm thinking about it. How much do you want for it? - Hitmanx 2011-02-02 00:57:17 (1392 views)
        
        Yeah, I'm not interested in it then. Plus shipping across the boarder would be - jason733i 2011-02-02 08:17:25 (1399 views)
        
        Re: Yeah, I'm not interested in it then. Plus shipping across the boarder would be - labimmer 2011-02-02 14:35:43 (1510 views)
- Are you using Redline gear oil? That seems the best - Vern 2010-12-21 14:28:20 (3397 views)
  - Absolutely NOT !!! a fan of RedLine in the Tranny - johnhstein, 85-M6CSi, 85 745i 2010-12-27 15:48:27 (3409 views)
  - I will look into changing the tranny oil this weekend. - jason733i 2010-12-22 10:22:48 (3342 views)
  - I replaced the tranny mounts in the summer... - jason733i 2010-12-21 14:46:09 (3396 views)
    - Re: I replaced the tranny mounts in the summer... - stevebu 2010-12-21 15:20:34 (3403 views)
      - Where exactly is the refill screw located? - jason733i 2010-12-22 17:30:09 (3368 views)
        
        Re: Where exactly is the refill screw located? - Hitmanx 2010-12-24 02:10:30 (3417 views)
        
        Yeah, I think it's obvious what the magnet is for and why it was put there. - jason733i 2010-12-27 14:37:11 (3288 views)
        
        Re: Yeah, I think it's obvious what the magnet is for and why it was put there. - Hitmanx 2010-12-27 15:07:38 (3359 views)
        
        Drain plug and refill plug are both 17 mm. Drain on the bottom - Vern 2010-12-23 02:07:57 (3455 views)
        
        Spent Christmas Eve looking around the area for a 17mm allen wrench... - jason733i 2010-12-24 17:18:25 (3322 views)
        
        Re: Spent Christmas Eve looking around the area for a 17mm allen wrench... (pic) (url) - Hitmanx 2010-12-26 00:55:57 (3422 views)
        Re: Spent Christmas Eve looking around the area for a 17mm allen wrench... - Hitmanx 2010-12-26 00:48:54 (3315 views)
        
        Thankfully my uncle who owns 2 bmws and a porsche had one... - jason733i 2010-12-26 21:53:31 (3338 views)
        
        Well... I made it to work ok. The shifting is seeming a little better, - jason733i 2010-12-27 08:27:31 (3331 views)
        
        Re: Well... I made it to work ok. The shifting is seeming a little better, - Hitmanx 2010-12-27 09:30:56 (3383 views)
        
        150 bucks to do what? Is that for the bushings? - jason733i 2010-12-27 10:44:09 (3307 views)
        
        Re: 150 bucks to do what? Is that for the bushings? - Hitmanx 2010-12-27 15:03:25 (3346 views)
        
        Question about a tranny listed on mye28.com (url) - jason733i 2010-12-29 15:02:04 (3355 views)
        
        It's the newer version of the 260 i think 86 it came out - goms187 2010-12-29 16:22:37 (3368 views)
        
        Mine has no fins... (nt) - jason733i 2010-12-29 17:23:53 (3290 views)
        
        Re: Mine has no fins... - Hitmanx 2010-12-29 19:52:27 (3297 views)
        
        I'll see if I can find it again this weekend when I have more time. - jason733i 2010-12-30 09:02:54 (3295 views)
        
        And how much oil does it take? (nt) - jason733i 2010-12-22 17:32:36 (3315 views)
        
        DO NOT overfill! - docevil 2010-12-24 19:38:18 (3376 views)
        
        Well... I jacked up the front end in order to crawl under... - jason733i 2010-12-26 21:55:38 (3316 views)
        
        Not good, if you only lifted the front and filled. - demet 2010-12-27 13:09:58 (3358 views)
        
        Most tool stores (SEARS, Northern, NAPA) ..... - johnhstein, 85-M6CSi, 85 745i 2010-12-27 15:54:28 (3369 views)
      - Re: I replaced the tranny mounts in the summer... - Hitmanx 2010-12-21 21:35:30 (3305 views)
        
        Re: I replaced the tranny mounts in the summer... - tc732 2010-12-22 14:56:11 (3391 views)
        
        Re: I replaced the tranny mounts in the summer... - Hitmanx 2010-12-22 18:35:27 (3375 views)

More headaches - stosich 2011-01-27 11:19:55 (3210 views)
- I don't usually go this route.... but.... - johnhstein, 85-M6CSi, 85 745i 2011-01-28 14:11:17 (3201 views)
  - Re: I don't usually go this route.... but.... - stosich 2011-01-28 14:36:44 (3174 views)
    - Sounds like you've got a plan, good luck - johnhstein, 85-M6CSi, 85 745i 2011-01-28 16:11:22 (3178 views)
      - thanks I will need it!! (nt) - stosich 2011-01-28 16:17:32 (3180 views)
- Re: More headaches - stevebu 2011-01-27 19:47:09 (3202 views)
  - Re: More headaches - stosich 2011-01-28 12:36:28 (3155 views)
    - Can't hurt to just re-torque the headbolts. - demet 2011-01-28 16:00:51 (3170 views)
      - Re: Can't hurt to just re-torque the headbolts. - stosich 2011-01-28 16:05:45 (3192 views)
- Re: More headaches - Hitmanx 2011-01-27 19:15:32 (3213 views)
  - HEAD - stosich 2011-01-28 12:24:56 (3180 views)
    - Re: HEAD - Hitmanx 2011-01-28 18:14:35 (3178 views)
      - Re: HEAD - Hitmanx 2011-01-30 04:49:20 (3167 views)
      - Re: HEAD - stosich 2011-01-29 11:05:51 (3175 views)

trunk closing adjustment question? - stosich 2011-01-25 13:11:11 (3143 views)
- Re: trunk closing adjustment question? (url) - kff 2011-01-26 10:50:37 (3158 views)
  - Got it done - stosich 2011-01-26 22:31:06 (3113 views)
    - Glad it worked out for you. (nt) - kff 2011-01-26 22:55:56 (3148 views)
  - Re: trunk closing adjustment question? - stosich 2011-01-26 11:36:37 (3128 views)
    - Download site... - demet 2011-01-26 13:27:22 (3162 views)
      - Re: Download site... - stosich 2011-01-26 15:48:57 (3133 views)
        
        Just in case anyone needs the torque specs... (url) - demet 2011-01-28 20:55:05 (3117 views)

tire size! - labimmer 2011-01-20 14:16:49 (3236 views)
- L.A., Do what Eric suggests. Those are style 6 wheels...felgen katalog (url) - Vern 2011-01-21 14:23:25 (4925 views)
  - Hold on a second... - ericcue 2011-01-25 19:52:22 (3156 views)
    - Re: Hold on a second... - labimmer 2011-01-27 14:52:26 (3129 views)
      - Re: Hold on a second... - ericcue 2011-01-27 19:53:42 (3134 views)
        
        Re: Hold on a second... - labimmer 2011-01-27 20:02:34 (3161 views)
    - Follow up - ericcue 2011-01-25 20:01:56 (3149 views)
  - Re: L.A., Do what Eric suggests. Those are style 6 wheels...felgen katalog - labimmer 2011-01-21 15:16:28 (3239 views)
- Re: tire size! - ericcue 2011-01-20 16:38:40 (3180 views)
- Re: tire size! - Hitmanx 2011-01-20 15:01:36 (3216 views)
  - Re: tire size! - labimmer 2011-01-21 10:55:43 (3213 views)
    - Re: tire size! - labimmer 2011-01-21 19:12:44 (3173 views)

Automobile repair manual - truckman 2011-01-26 15:14:55 (3182 views)
- thank DEMET for this - stosich 2011-01-27 12:41:11 (3237 views)
- Re: Automobile repair manual - Hitmanx 2011-01-26 15:17:55 (3181 views)

Momo Hub shows up for sale (url) - kff 2011-01-25 09:42:22 (3165 views)
- It was me. I cannot take this transit bus wheel any longer. (nt) - Hitmanx 2011-01-26 15:18:35 (3137 views)
- Someone grabbed it. Hope it was someone here. (nt) - kff 2011-01-26 10:52:50 (3141 views)

transmission question ? - quasimodo 2011-01-22 20:08:44 (3209 views)
- Re: transmission question ? - Hitmanx 2011-01-23 09:56:56 (3144 views)
  - Re: transmission question ? - quasimodo 2011-01-23 22:58:03 (3117 views)
    - Re: transmission question ? - Hitmanx 2011-01-24 18:27:31 (3140 views)
      - Re: transmission question ? - quasimodo 2011-01-24 23:09:33 (3133 views)
    - Not sure about the 's' in the shift pattern- - stevebu 2011-01-24 12:09:26 (3131 views)
      - Re: Not sure about the 's' in the shift pattern- - quasimodo 2011-01-24 22:54:24 (3137 views)
        
        No that's not the electrical plug- - stevebu 2011-01-25 07:06:31 (3169 views)
        
        Re: No that's not the electrical plug- - quasimodo 2011-01-25 21:45:11 (3122 views)
- Re: transmission question ? - stevebu 2011-01-23 08:25:11 (3179 views)
  - Re: transmission question ? - quasimodo 2011-01-23 09:03:28 (3142 views)
    - The years were 1984 and 1985 M30 engined cars - ericcue 2011-01-25 19:55:54 (3142 views)

tilt steering wheel - birdbuys 2011-01-23 10:28:43 (3131 views)
- Re: tilt steering wheel - Hitmanx 2011-01-23 16:00:08 (3136 views)
  - Re: tilt steering wheel - labimmer 2011-01-24 12:56:10 (3105 views)
    - Re: tilt steering wheel - kff 2011-01-24 19:10:28 (3153 views)
      - If you already have the wheel just try it- - stevebu 2011-01-25 07:12:23 (3125 views)

Soaking wet inside - stosich 2011-01-23 01:07:33 (3153 views)
- Re: Soaking wet inside - oldsurge 2011-01-24 11:23:04 (3129 views)
  - 5 SERIES - stosich 2011-01-24 17:03:52 (3136 views)
- Re: Soaking wet inside (url) - kff 2011-01-23 06:36:26 (3175 views)
  - Re: Soaking wet inside (url) - microcat36 2011-01-23 11:33:17 (3185 views)
    - Re: Soaking wet inside - stosich 2011-01-23 12:00:22 (3131 views)

Center support bearing replacement, this afternoon...fun (nt) - Vern 2011-01-19 14:48:46 (3398 views)
- Re: Center support bearing replacement, this afternoon...fun - Hitmanx 2011-01-23 16:05:19 (3718 views)
- Re: Center support bearing replacement, this afternoon...fun - Hitmanx 2011-01-20 15:00:22 (3196 views)
  - No fun, at all - Vern 2011-01-21 14:14:04 (3161 views)
  - Isn't that the way it goes? - datcord 2011-01-20 15:11:27 (3157 views)
- Re: Center support bearing replacement, this afternoon...fun - Hitmanx 2011-01-20 09:01:21 (3218 views)

VIN 8752069 follwed me home last week... (pic) - Vern 2011-01-18 15:20:10 (3354 views)
- OOPS!!! Vin is 8752059, not 2069 (nt) - Vern 2011-01-19 14:29:25 (3178 views)
- What years did you own it? Looks good. - kff 2011-01-18 20:06:28 (3181 views)
  - Wow, Keith, you ask a tough question - Vern 2011-01-19 12:01:11 (3194 views)
- Re: VIN 8752069 follwed me home last week... - Hitmanx 2011-01-18 16:01:13 (3204 views)
  - Near Hemet, CA. Where there is no support. (nt) - Vern 2011-01-19 01:26:49 (3166 views)
- Re: VIN 8752069 follwed me home last week... - microcat36 2011-01-18 15:47:15 (3183 views)
  - Hey, Cat, lots, for sure - Vern 2011-01-19 01:25:07 (3236 views)
    - If ya need help with anything... - Area52 2011-01-20 08:31:48 (3174 views)
      - I may need help finishing the case of Corona and lime - Vern 2011-01-22 04:24:49 (3156 views)

Parts car - mattinjax 2010-12-22 18:15:47 (3308 views)
- Re: Parts car - Hitmanx 2010-12-22 18:36:21 (3366 views)
  - Re: Parts car - mattinjax 2011-01-21 19:39:26 (1331 views)

1984 E23 745i Turbo for sale (pic) - 7173bmw 2011-01-18 14:46:28 (3665 views)
- Do you have any working pictures you could post? (nt) - jason733i 2011-01-20 14:29:13 (3208 views)
- Re: 1984 E23 745i Turbo for sale - Hitmanx 2011-01-18 16:15:05 (3295 views)
  - Re: 1984 E23 745i Turbo for sale - 7173bmw 2011-01-18 21:10:48 (3557 views)
    - Re: 1984 E23 745i Turbo for sale - 7173bmw 2011-01-19 16:27:03 (3253 views)
      - Re: 1984 E23 745i Turbo for sale - zerhackermann 2011-01-20 14:34:07 (3488 views)
        
        112K miles on a 745i is nothing. Please don't crush it! (nt) - jason733i 2011-01-21 09:25:14 (3182 views)
        
        Re: 112K miles on a 745i is nothing. Please don't crush it! - 7173bmw 2011-01-21 10:39:37 (3198 views)
        Re: 112K miles on a 745i is nothing. Please don't crush it! - 7173bmw 2011-01-21 10:37:30 (3193 views)

Atlanta, GA 745i parts CL find... - Hitmanx 2011-01-18 17:32:44 (3189 views)

BRAKE LIGHT FUSE KEEPS BLOWING-CAUSE - cpseapeacp 2011-01-17 01:04:00 (3187 views)
- check the switch on the brake pedal.... - johnhstein, 85-M6CSi, 85 745i 2011-01-17 17:33:39 (3174 views)
- Never had a problem with the e32 alt... - demet 2011-01-17 10:25:20 (3182 views)
  - Re: Never had a problem with the e32 alt... - cpseapeacp 2011-01-17 11:36:39 (3160 views)
    - My cruise lever is broken, too. - datcord 2011-01-17 14:16:40 (3178 views)
      - Switches from e28's should also work. - demet 2011-01-17 17:31:49 (3175 views)

e23 emmisions help uk mot failure - ycs3euk 2011-01-06 18:13:30 (4395 views)
- Hitmanx is on the right trail - johnhstein, 85-M6CSi, 85 745i 2011-01-13 15:20:25 (3184 views)
  - Re: Hitmanx is on the right trail - Hitmanx 2011-01-13 22:35:13 (3169 views)
    - finally sold my 89 300TE w/ CIS...... - johnhstein, 85-M6CSi, 85 745i 2011-01-14 08:17:54 (3146 views)
      - Re: finally sold my 89 300TE w/ CIS...... - Hitmanx 2011-01-16 01:18:29 (3169 views)
- Chris, does MOT measure five gases? - Vern 2011-01-13 01:48:32 (3178 views)
  - Re: Chris, does MOT measure five gases? (pic) - microcat36 2011-01-13 08:04:24 (3219 views)
- Re: e23 emmisions help uk mot failure - microcat36 2011-01-06 18:35:36 (4391 views)
- Re: e23 emmisions help uk mot failure - Hitmanx 2011-01-06 18:22:55 (4367 views)

Pic of mountingbracket for cc actuator? - borge 2011-01-14 14:21:16 (3153 views)
- Re: Pic of mountingbracket for cc actuator? - Hitmanx 2011-01-14 19:38:43 (3122 views)

E23 headlight harness install pics - cant find them - tranmkp 2011-01-14 18:20:05 (3172 views)

735i brakes stuck - p5bcoupe 2010-12-30 02:17:51 (4023 views)
- Re: 735i brakes stuck - p5bcoupe 2011-01-12 01:36:19 (2072 views)
  - the only tie-in...... - johnhstein, 85-M6CSi, 85 745i 2011-01-14 12:07:53 (2092 views)
- I'm with HITMAN..... (url) - johnhstein, 85-M6CSi, 85 745i 2011-01-03 11:00:31 (3959 views)
  - Re: I'm with HITMAN..... - p5bcoupe 2011-01-03 17:23:25 (3817 views)
    - It is not a stuck caliper .... - johnhstein, 85-M6CSi, 85 745i 2011-01-04 08:56:19 (3819 views)
      - Minor addition.... - johnhstein, 85-M6CSi, 85 745i 2011-01-04 09:09:00 (3771 views)
- Re: 735i brakes stuck - Hitmanx 2011-01-01 21:55:49 (3937 views)
  - Re: 735i brakes stuck - p5bcoupe 2011-01-02 05:46:05 (3962 views)
- Welcome. - demet 2010-12-31 14:50:14 (3970 views)
  - Re: Welcome. - p5bcoupe 2011-01-01 20:38:42 (4011 views)

Negative rear camber... - Hitmanx 2011-01-02 20:13:20 (4488 views)
- Excessive rear camber ..... (url) - johnhstein, 85-M6CSi, 85 745i 2011-01-05 12:19:32 (4394 views)
  - Re: Excessive rear camber ..... - Hitmanx 2011-01-05 15:32:55 (4338 views)
    - Re: Excessive rear camber ..... - datcord 2011-01-06 08:52:39 (4334 views)
      - I took mine to the local shop, didn't have the ..... - johnhstein, 85-M6CSi, 85 745i 2011-01-11 16:44:15 (2594 views)
- I have some also but no noticable wear on tires. (url) - demet 2011-01-03 10:24:35 (4398 views)
  - Re: I have some also but no noticable wear on tires. - vance 2011-01-03 16:13:04 (4365 views)
    - Welcome ... (pic) - demet 2011-01-03 17:19:06 (4446 views)
      - Re: Welcome ... - vance 2011-01-03 17:37:00 (4348 views)
  - Re: I have some also but no noticable wear on tires. - Hitmanx 2011-01-03 11:28:22 (4371 views)
    - I can get a pic or two by this weekend. - demet 2011-01-03 17:03:18 (4380 views)
      - Kind of difficult to take some pics today... (pic) - demet 2011-01-12 10:20:42 (2590 views)
        
        That's not snow! Why, back in my day... *mutter mutter* (nt) - datcord 2011-01-12 14:13:09 (2591 views)
        
        Yeah I know, other places are worst, but I had to share. - demet 2011-01-12 17:49:37 (2566 views)

car leaving a pool of atf every night - stosich 2011-01-12 14:57:45 (3323 views)
- Nope, not the master cylinder. - demet 2011-01-12 15:06:38 (3186 views)
  - O-RING - stosich 2011-01-12 17:02:43 (3172 views)
  - Linky... (url) - demet 2011-01-12 15:20:34 (3215 views)
    - I think we have it - stosich 2011-01-12 16:27:52 (3176 views)

First Post, Need Advice on Buying E23/735i (vid) - aircap 2011-01-09 03:01:14 (4467 views)
- dome lights - stosich 2011-01-12 15:00:20 (3181 views)
- The owner's manual is over there-----> - kff 2011-01-11 14:02:22 (3212 views)
- Re: First Post, Need Advice on Buying E23/735i - Hitmanx 2011-01-09 16:40:47 (4409 views)
  - Re: First Post, Need Advice on Buying E23/735i - aircap 2011-01-10 00:41:21 (4357 views)
    - Re: First Post, Need Advice on Buying E23/735i - Hitmanx 2011-01-10 02:29:44 (4363 views)
      - Re: First Post, Need Advice on Buying E23/735i - aircap 2011-01-11 01:43:56 (4289 views)
- Re: First Post, Need Advice on Buying E23/735i - aircap 2011-01-09 12:29:10 (4360 views)
- Nice car and video, tells a lot- - stevebu 2011-01-09 08:47:09 (4372 views)
  - What Steve says. - demet 2011-01-09 10:04:03 (4379 views)

Low speed/RPM running questions (AFM and TB) - Hitmanx 2010-12-24 06:21:24 (4002 views)
- Re: Low speed/RPM running questions (AFM and TB) - Hitmanx 2011-01-10 21:36:23 (3143 views)
- Re: Low speed/RPM running questions (AFM and TB) - stevebu 2011-01-10 16:41:22 (3065 views)
- Coolant temp sensor for the motronic. (nt) - Vern 2011-01-10 15:41:02 (3164 views)
- Which ecu/afm combo are you running? (pic) - demet 2010-12-24 20:46:57 (4019 views)
  - Re: Which ecu/afm combo are you running? - Hitmanx 2010-12-24 23:21:28 (3953 views)
    - Re: Which ecu/afm combo are you running? - demet 2010-12-25 09:49:37 (3920 views)
      - Re: Which ecu/afm combo are you running? - Hitmanx 2010-12-26 01:08:48 (3949 views)
        
        Re: Which ecu/afm combo are you running? - Hitmanx 2010-12-26 05:40:53 (3999 views)

Battery will die after 48 hours if not driven - stosich 2011-01-04 14:10:29 (4410 views)
- Re: Battery will die after 48 hours if not driven - Hitmanx 2011-01-10 16:43:10 (3728 views)
- Re: Battery will die after 48 hours if not driven - Hitmanx 2011-01-04 14:54:46 (4411 views)
  - What Hitmanx said. - demet 2011-01-04 21:58:01 (4317 views)
    - Re: What Hitmanx said. - stosich 2011-01-10 10:03:13 (3705 views)
  - Sound Advice - stosich 2011-01-04 15:40:58 (4410 views)
    - Re: Sound Advice - Hitmanx 2011-01-04 17:22:20 (4364 views)
- forgot to mention. - stosich 2011-01-04 14:11:07 (4336 views)

Charcaol cannister - jdw928 2011-01-09 19:54:55 (4310 views)
- Re: Charcaol cannister - Hitmanx 2011-01-09 22:58:12 (4291 views)

Getrag 265 input reseal - Hitmanx 2011-01-06 14:30:45 (4761 views)
- Simple selector seal replacement... - demet 2011-01-06 16:19:12 (4371 views)
  - Re: Simple selector seal replacement... - Hitmanx 2011-01-06 18:17:57 (4388 views)
    - Not sure if it's common procedure... - demet 2011-01-06 20:28:23 (4409 views)
      - Re: Not sure if it's common procedure... - Hitmanx 2011-01-06 20:52:26 (4380 views)
        
        Re: Not sure if it's common procedure... - pawk72 2011-01-06 23:48:00 (4381 views)

Cold Start Injector - vance 2011-01-03 17:45:47 (4388 views)
- Cold Start Injector NLA from Bosch - vance 2011-01-06 16:48:44 (4369 views)
  - Re: Cold Start Injector NLA from Bosch - Hitmanx 2011-01-06 18:16:16 (4375 views)
- Re: Cold Start Injector - ghw 2011-01-04 11:40:43 (4320 views)
- Good first step... - demet 2011-01-03 18:33:06 (4332 views)
  - Re: Good first step... - vance 2011-01-04 16:30:46 (4368 views)

e23 headlights vs e28 - ycs3euk 2011-01-05 15:58:13 (4378 views)
- you might need new lamp adjuster bushes, # 14 (url) - phathome 2011-01-06 08:18:55 (4376 views)
  - Re: you might need new lamp adjuster bushes, # 14 - ycs3euk 2011-01-06 14:02:26 (4341 views)
- Re: e23 headlights vs e28 - pawk72 2011-01-05 17:36:06 (4386 views)

Replacement fan clutch crapped out already. - peeeot 2011-01-05 15:03:00 (4403 views)
- Re: Replacement fan clutch crapped out already. - Hitmanx 2011-01-05 15:32:35 (4383 views)
  - Looks like it's locked up = defective. - demet 2011-01-05 16:46:40 (4422 views)
    - It actually didn't lock up, - peeeot 2011-01-05 17:56:19 (4371 views)
      - Yes they're the bolt through type. - demet 2011-01-05 20:17:01 (4403 views)

Crankcase Vacuum Line's Gone Soft - peeeot 2011-01-04 22:52:31 (4341 views)
- Silicone hose works well here. - demet 2011-01-05 00:10:30 (4370 views)
  - hm, that'd do. - peeeot 2011-01-05 14:48:55 (4316 views)

Vapor Purge Check Valve - why? - peeeot 2011-01-04 22:59:14 (4407 views)
- Re: Vapor Purge Check Valve - why? (url) - kff 2011-01-05 00:58:15 (4470 views)
  - that is a sweet link. - peeeot 2011-01-05 14:42:07 (4411 views)

Info on 4 guage cluster plans. Hitman? - euro735i 2011-01-02 19:44:51 (4404 views)
- Thats pretty slick - what guages are those? (nt) - tranmkp 2011-01-03 23:32:07 (4316 views)
  - Re: Thats pretty slick - what guages are those? - demet 2011-01-05 10:46:17 (4383 views)
- Re: Info on 4 guage cluster plans. Hitman? - Hitmanx 2011-01-02 19:55:34 (4430 views)
  - I would be interested in two if made from aluminum and for 2 1/16' gauges (pic) - demet 2011-01-03 10:07:43 (4441 views)
  - There are a ton of CNC shops near me - euro735i 2011-01-02 20:11:58 (4377 views)
    - Re: There are a ton of CNC shops near me - Hitmanx 2011-01-02 20:29:42 (4341 views)
      - Might try these guys - vance 2011-01-05 11:04:12 (4369 views)

M30 Crankcase Ventilation Explanation? - peeeot 2011-01-04 23:35:56 (4376 views)

Moon roof retrofit - sharknosel7 2011-01-02 03:33:12 (4548 views)
- Re: Moon roof retrofit (url) - microcat36 2011-01-02 07:12:35 (4302 views)
  - Re: Moon roof retrofit - sharknosel7 2011-01-04 00:04:59 (4330 views)
    - Re: Moon roof retrofit - microcat36 2011-01-04 05:30:00 (4368 views)
      - Re: Moon roof retrofit (pic) - sharknosel7 2011-01-04 23:08:01 (4399 views)

E23 Manual Parts for Sale - pawk72 2011-01-04 22:33:36 (4396 views)

Let us give a high five to David! - Hitmanx 2011-01-01 13:01:28 (4540 views)
- Re: Let us give a high five to David! - blowmywhistle 2011-01-01 22:17:29 (4491 views)
- Ok, And a Happy New Year, too. (nt) - kff 2011-01-01 13:34:34 (4475 views)
  - Re: Ok, And a Happy New Year, too. - borge 2011-01-04 07:54:11 (4323 views)

CL find - Cheap/Free M106 block in Michigan - Hitmanx 2011-01-02 21:26:27 (4394 views)

speedo works but not odometer? - blowmywhistle 2010-12-30 22:24:08 (3938 views)
- Re: speedo works but not odometer? - Hitmanx 2011-01-01 14:57:36 (3911 views)
- Re: speedo works but not odometer? - blowmywhistle 2011-01-01 00:20:08 (3925 views)
- gears drive the odometer. - kff 2010-12-31 02:10:02 (3962 views)

'83 733i (Manual Transmission) (url) - kellemr1 2010-12-31 17:58:23 (4544 views)
- Re: '83 733i (Manual Transmission) - Hitmanx 2010-12-31 19:07:57 (4481 views)
  - wow you almost make his car sound worthless, but maybe - kff 2011-01-01 08:29:40 (4469 views)
    - Re: wow you almost make his car sound worthless, but maybe - Hitmanx 2011-01-01 11:36:57 (4472 views)
      - Wait, updated fan? There is talk that the red fan is - kff 2011-01-01 13:33:45 (4466 views)
        
        Re: Wait, updated fan? There is talk that the red fan is - Hitmanx 2011-01-01 14:39:21 (4505 views)

ICV questions - Hitmanx 2010-12-28 13:00:23 (3995 views)
- Are you talking about the 059? - demet 2010-12-28 22:00:09 (3911 views)
  - Re: Are you talking about the 059? - Hitmanx 2010-12-29 19:34:20 (3982 views)
    - LOL - demet 2010-12-30 10:47:52 (3936 views)
      - Re: LOL - Hitmanx 2011-01-01 11:34:36 (3968 views)

drip drip drip... - blowmywhistle 2010-12-27 23:18:34 (3929 views)
- It sounds like you have a major heater core leak... - jason733i 2010-12-28 14:55:37 (3941 views)
  - Re: It sounds like you have a major heater core leak... - blowmywhistle 2011-01-01 00:27:08 (3938 views)
  - Re: It sounds like you have a major heater core leak... - blowmywhistle 2011-01-01 00:26:52 (3930 views)

Diagnostics software and cables - pedro730i 2010-12-31 08:55:15 (3953 views)
- Re: Diagnostics software and cables - Hitmanx 2010-12-31 12:17:15 (3934 views)

Bah humbug, my E23 has died on Christmas Eve :-( (pic) - phathome 2010-12-24 10:33:45 (4139 views)
- Re: Bah humbug, my E23 has died on Christmas Eve :-( - limeyexpat 2010-12-30 10:16:05 (3939 views)
- Re: Bah humbug, my E23 has died on Christmas Eve :-( - Hitmanx 2010-12-25 04:54:43 (3933 views)
- The 17mm BMW wrench works great ... (pic) - demet 2010-12-24 20:30:50 (4035 views)
- The starter is a slow swap. I made a hlf moon wrench fit - kff 2010-12-24 10:48:35 (4069 views)
  - thanks Keith, I'll get a real mechanic to handle that pesky bolt - phathome 2010-12-24 12:21:19 (4023 views)

Green wagon is on the bay (url) - kff 2010-12-27 14:25:32 (4010 views)
- Re: Green wagon is on the bay - limeyexpat 2010-12-30 10:07:53 (3885 views)
- Definitely a nice example, but I can't believe that it's getting such high price (nt) - DavidC 2010-12-30 05:58:30 (4005 views)
- Re: Green wagon is on the bay - Hitmanx 2010-12-29 20:14:50 (3967 views)
- The fact that it only has 9,000 miles on it is intriguing. (nt) - jason733i 2010-12-27 14:43:22 (3963 views)

stalling - oldsurge 2010-12-22 20:02:53 (3325 views)
- Re: stalling - ericcue 2010-12-22 23:07:01 (3246 views)
  - Re: stalling - oldsurge 2010-12-24 10:50:36 (3301 views)

Swapping rear suspension from late to early model? - thradya 2010-12-21 10:24:55 (3283 views)
- Very simple...use a sawzall to cut the shoulder off the newer shock. (nt) - Vern 2010-12-21 14:23:33 (3262 views)
  - Re: Very simple...use a sawzall to cut the shoulder off the newer shock. - thradya 2010-12-21 19:10:57 (3285 views)

What would this mean for the U.S. e23 drivers if the EPA passes this? (url) - jason733i 2010-12-20 15:37:20 (3310 views)
- Water...The ATF does not license fuel companies to sell - Vern 2010-12-21 14:21:13 (3302 views)
- Re: What would this mean for the U.S. e23 drivers if the EPA passes this? - limeyexpat 2010-12-20 20:10:28 (3315 views)
- I have no idea if the increased ethanol content hurts anything. - demet 2010-12-20 16:17:13 (3297 views)
  - So would I. Where I live, you can't get NON-ethanol added gas. (nt) - datcord 2010-12-21 10:55:51 (3310 views)
  - Gaskets maybe? I don't think a 5% jump would cause enough heat to - jason733i 2010-12-20 16:36:39 (3289 views)
    - Re: Gaskets maybe? I don't think a 5% jump would cause enough heat to - log20006 2010-12-20 19:54:06 (3310 views)
      - No way it will raise the octane, the fuel companies will dilute - kff 2010-12-20 21:47:34 (3357 views)

Signal Light Switch Arm (pic) - docevil 2010-12-19 23:07:35 (3394 views)
- Whoa! I didn't relize there was a switch there that did anything at all! (nt) - jason733i 2010-12-20 10:14:05 (3342 views)
  - I never noticed it because I don't have it... must be for obc2 (nt) - jason733i 2010-12-20 23:53:36 (3345 views)
    - Re: I never noticed it because I don't have it... must be for obc2 - Hitmanx 2010-12-21 00:54:45 (3313 views)
- Re: Signal Light Switch Arm - Hitmanx 2010-12-19 23:52:26 (3342 views)
- Look at the on-board computer section. (nt) - demet 2010-12-19 23:33:16 (3426 views)
  - Re: Look at the on-board computer section. - docevil 2010-12-20 00:10:10 (3325 views)
    - True, unless you're clumsy like me... - demet 2010-12-20 00:17:07 (3332 views)