The 7 Series E23 Forum

sticky: DFW7: Laps for Charity at Texas Motor Speedway, Sep 11, 6:00 PM (pic) (url) - JL 2010-08-24 15:38:32 (89 views)

sticky: How to add a photo to your signature. (url) - DavidC 2009-04-07 01:21:03 (8144 views)

sticky: How to upload and insert photos into messages (pic) (url) - DavidC 2009-02-15 10:02:42 (9161 views)

sticky: Engine components Pictures for E23 (pic) - CNN-090 2006-06-24 09:09:12 (13947 views)

'normal behavior?' questions. - peeeot 2010-08-30 22:17:18 (31 views)
- Re: 'normal behavior?' questions. - Hitmanx 2010-08-31 17:10:39 (20 views)
  - Mine is the 4-spd all-hydraulic unit. - peeeot 2010-09-03 11:26:57 (12 views)
    - That downshift switch isn't connected on a non-EH tranny. (nt) - demet 2010-09-03 17:40:09 (9 views)
      - Hah! I didn't know. What does the wide open switch - peeeot 2010-09-03 23:30:41 (7 views)
        
        Lack of WOT signal may explain your leisurely acceleration. (pic) - demet 2010-09-04 08:46:03 (3 views)
- If you have the EH tranny have you tried the acceleration in sport mode? - phathome 2010-08-31 13:19:40 (20 views)
  - My '85 is probably the same as your '84 was. - peeeot 2010-09-03 11:32:36 (11 views)
    - My 85 non EH auto kicks pretty good- - stevebu 2010-09-03 14:30:53 (15 views)
      - How big is the gap - peeeot 2010-09-03 23:29:10 (5 views)
        
        Re: How big is the gap - Hitmanx 2010-09-03 23:37:11 (6 views)

I need a part for my german spec 728i (pic) - Adel - 1986 735i & 728i 2010-09-04 04:03:37 (14 views)

e23 clear corner lens - Adel - 1986 735i & 728i 2010-08-08 12:51:02 (172 views)
- I would like a set (nt) - dmacias 2010-09-03 04:16:08 (10 views)
  - Thanks, e-mail sent ! (nt) - Adel - 1986 735i & 728i 2010-09-04 03:57:23 (2 views)
- I'll take a set. (nt) - johnhstein, 85-M6CSi, 85 745i 2010-08-09 12:19:57 (69 views)
  - Thanks John, sent you an e-mail. (nt) - Adel - 1986 735i & 728i 2010-08-09 15:22:12 (69 views)
- Pictures? (nt) - 06impreza 2010-08-08 16:32:50 (80 views)
  - Re: Pictures? (pic) - Adel - 1986 735i & 728i 2010-08-09 06:44:10 (180 views)
    - I would also like a set. (nt) - ssf1342 2010-08-14 00:53:25 (68 views)

Need your help guys - part # for heater valve hose (pic) - phathome 2010-09-02 13:07:16 (29 views)
- Re: Need your help guys - part # for heater valve hose - stevebu 2010-09-03 14:36:37 (13 views)
  - Steve, you are da man, the autohaus site makes it so clear (url) - phathome 2010-09-04 02:23:07 (7 views)

Headlamp upgrade... - ssf1342 2010-09-03 20:18:20 (12 views)
- Yes to both questions... (url) - demet 2010-09-03 21:13:29 (12 views)

Is it the good getrag 5 speed? - brkngmd 2010-08-26 06:16:01 (60 views)
- Re: Is it the good getrag 5 speed? - Hitmanx 2010-08-27 00:29:17 (36 views)
  - Re: Is it the good getrag 5 speed? - brkngmd 2010-09-01 16:33:19 (15 views)
    - Re: Is it the good getrag 5 speed? - Hitmanx 2010-09-02 18:37:30 (11 views)
    - Re: Is it the good getrag 5 speed? - stevebu 2010-09-01 18:46:54 (10 views)

e23 climate control demist only - mb230sl 2010-09-01 20:26:15 (19 views)
- Re: e23 climate control demist only - Hitmanx 2010-09-01 22:12:30 (17 views)
  - Re: e23 climate control demist only - mb230sl 2010-09-01 23:37:37 (14 views)
    - Re: e23 climate control demist only - Hitmanx 2010-09-02 18:36:09 (10 views)
    - Re: e23 climate control demist only - demet 2010-09-02 08:55:42 (12 views)

7 Series Meet - 10/3 Valley Forge, PA - 06impreza 2010-09-01 23:24:09 (16 views)
- more details - 06impreza 2010-09-02 17:53:11 (11 views)

What the heezies are these rims? (pic) - blackwolf560 2010-08-29 21:00:09 (74 views)
- Definitely Weds Bavarias. - peeeot 2010-08-30 22:05:39 (24 views)
  - Re: Definitely Weds Bavarias. - Hitmanx 2010-08-31 16:49:16 (17 views)
    - Re: Definitely Weds Bavarias. (pic) - Draleu 2010-08-31 19:20:21 (38 views)
      - Re: Definitely Weds Bavarias. - jdw928 2010-09-01 10:48:52 (14 views)
        
        Re: Definitely Weds Bavarias. (url) - Draleu 2010-09-01 13:00:10 (14 views)
- Re: What the heezies are these rims? - ericcue 2010-08-30 00:35:01 (26 views)
  - Re: What the heezies are these rims? - derrith 2010-08-30 01:35:20 (20 views)

Front end Clunk - stosich 2010-08-28 19:32:13 (31 views)
- Re: Front end Clunk - stosich 2010-08-30 02:15:13 (20 views)
- All of them... - ejonesie22 2010-08-29 20:00:14 (28 views)
- Re: Front end Clunk - Hitmanx 2010-08-29 17:23:46 (27 views)
  - Re: Front end Clunk - Area52 2010-08-30 08:23:07 (17 views)

Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... (pic) - Draleu 2010-08-10 17:20:44 (257 views)
- Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - euro735i 2010-08-26 09:22:25 (61 views)
  - Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - Draleu 2010-08-27 14:35:26 (32 views)
- Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - log20006 2010-08-21 18:13:59 (56 views)
- Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - unvago 2010-08-15 21:17:12 (72 views)
- Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - unvago 2010-08-15 10:30:57 (72 views)
  - Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - Draleu 2010-08-16 01:26:39 (66 views)
    - Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - brkngmd 2010-08-26 07:13:56 (46 views)
      - Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - Draleu 2010-08-27 14:33:00 (26 views)
    - Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - unvago 2010-08-16 13:31:55 (72 views)
- Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - borge 2010-08-11 13:48:17 (92 views)
  - Re: Last Call B4 Going On *Bay...Parting 745i Lots Of Pics... - Draleu 2010-08-11 22:49:25 (81 views)
- Rear deck BBS Spoiler........ (pic) - Draleu 2010-08-10 23:53:33 (168 views)
  - Re: Rear deck BBS Spoiler........ - Hitmanx 2010-08-11 19:44:00 (77 views)
    - Re: Rear deck BBS Spoiler........ - Draleu 2010-08-12 01:10:17 (69 views)
      - Re: Rear deck BBS Spoiler........ - Hitmanx 2010-08-12 01:13:08 (75 views)
- think i know the answer to this but... - goms187 2010-08-10 23:52:58 (74 views)
  - Re: think i know the answer to this but... - Draleu 2010-08-10 23:57:08 (74 views)
    - correct but - goms187 2010-08-11 00:07:15 (75 views)
      - to clear up what i meant (pic) - goms187 2010-08-12 19:20:42 (126 views)
        
        Well, the trim piece is different from yours.... (pic) - Draleu 2010-08-13 23:17:50 (110 views)
        
        I find that strange - goms187 2010-08-17 19:06:45 (69 views)

Part Price Moan (pic) - microcat36 2010-08-25 18:12:46 (93 views)
- This part uses 6V bulbs as they are in series for the 12V source (url) - kff 2010-08-26 11:18:26 (51 views)
  - Re: This part uses 6V bulbs as they are in series for the 12V source - microcat36 2010-08-26 12:40:56 (41 views)
- There you go. - demet 2010-08-25 20:22:33 (53 views)

87bmw no start - ernrose 2010-08-23 11:35:11 (68 views)
- Re: 87bmw no start - strobachyzoo 2010-08-24 21:25:02 (49 views)
  - Re: 87bmw no start - Hitmanx 2010-08-25 02:26:19 (48 views)
- Crank-no start condition??? (url) - Area52 2010-08-23 19:10:13 (56 views)
  - Re: Crank-no start condition??? - Hitmanx 2010-08-23 19:42:00 (50 views)

745 Posi Rear End - oldmaddog 2010-08-23 12:13:50 (77 views)

nice reference pics - tranmkp 2010-08-23 10:15:29 (81 views)

Parting running 86 745i with 86K miles..... Lots of Pics (pic) - Draleu 2010-08-06 16:37:20 (272 views)
- Re: Parting running 86 745i with 86K miles..... Lots of Pics - Draleu 2010-08-06 20:29:50 (96 views)
  - Re: Parting running 86 745i with 86K miles..... Lots of Pics - log20006 2010-08-21 18:03:21 (57 views)
    - Re: Parting running 86 745i with 86K miles..... Lots of Pics - log20006 2010-08-21 18:04:51 (57 views)
- Re: Parting running 86 745i with 86K miles..... Lots of Pics - BigBruce 2010-08-06 18:17:58 (91 views)
  - Re: Parting running 86 745i with 86K miles..... Lots of Pics - Draleu 2010-08-06 20:19:15 (96 views)
- Re: Parting running 86 745i with 86K miles..... Lots of Pics - Hitmanx 2010-08-06 18:08:02 (88 views)
  - Weird the reply ended up all on it's own up top...... - Draleu 2010-08-06 20:31:36 (79 views)
    - whats the history with the tires? - tranmkp 2010-08-09 13:55:01 (73 views)
      - Re: whats the history with the wheels? (url) - Draleu 2010-08-09 17:04:43 (98 views)
      - Re: whats the history with the Wheels? Sorry... (nt) - tranmkp 2010-08-09 16:12:11 (60 views)
    - Re: Weird the reply ended up all on it's own up top...... - Hitmanx 2010-08-06 20:49:16 (80 views)

WTB: 735 engine harness - 06impreza 2010-08-21 15:13:02 (58 views)

1978 E23 Left Front WIndow Motor - fiedler1999 2010-08-20 22:04:29 (61 views)

2 L7's dropped at Mowry picknpull today - sfdon 2010-08-09 23:17:37 (133 views)
- Re: 2 L7's dropped at Mowry picknpull today (pic) - oldsurge 2010-08-10 10:23:03 (144 views)
  - here ya go........... - sfdon 2010-08-16 22:49:37 (74 views)
  - just to get to the euro cars is a 1/4 mile walk - sfdon 2010-08-10 21:50:46 (97 views)
    - I wish my local yards did that it's always a wild goose chase.. - 06impreza 2010-08-18 18:59:44 (68 views)
    - Re: just to get to the euro cars is a 1/4 mile walk - oldsurge 2010-08-16 11:01:24 (63 views)

Water Pump Pulley Part Number - peeeot 2010-08-17 11:30:57 (67 views)
- Re: Water Pump Pulley Part Number - Hitmanx 2010-08-17 17:12:14 (80 views)
  - Re: Water Pump Pulley Part Number - peeeot 2010-08-18 00:17:47 (60 views)

Which antenna mast? - Hitmanx 2010-08-13 21:50:06 (77 views)
- the toothed mast has an h and o4 on the top. (nt) - kff 2010-08-16 18:21:11 (61 views)
  - Re: the toothed mast has an h and o4 on the top. - Hitmanx 2010-08-16 22:53:16 (62 views)

aux fan + ballast - stevebu 2010-08-05 05:15:22 (81 views)
- I think we need a pic of this reddish thing. - demet 2010-08-05 15:19:17 (72 views)
  - The reddish thing is the 'other' type resistor - stevebu 2010-08-05 16:28:46 (76 views)
    - i can't locate my camera- - stevebu 2010-08-15 11:30:44 (54 views)
      - Re: i can't locate my camera- - Hitmanx 2010-08-15 19:40:57 (61 views)
        
        The mount locations were identical - stevebu 2010-08-16 20:05:08 (55 views)

Reverse lights? - Hitmanx 2010-08-11 19:43:37 (63 views)
- No NSS on a manual, so you can start without clutch pedal depressed. - demet 2010-08-11 20:13:00 (63 views)
  - Re: No NSS on a manual, so you can start without clutch pedal depressed. - Hitmanx 2010-08-11 20:17:11 (65 views)
    - Shouldn't - goms187 2010-08-11 21:45:43 (60 views)
      - Re: Shouldn't - Hitmanx 2010-08-11 22:49:09 (76 views)
        
        i can tell you its fuse 17 that goes to the switch for the lights, - goms187 2010-08-12 19:28:20 (61 views)
        
        Re: i can tell you its fuse 17 that goes to the switch for the lights, - Hitmanx 2010-08-13 15:52:36 (57 views)

Just swapped over to 059 and 027 - 06impreza 2010-08-08 17:58:43 (95 views)
- I'm assuming the 84 has the low impedence injectors. - demet 2010-08-09 10:44:14 (71 views)
  - Is it worth the extra money to get the design III instead on II?? - 06impreza 2010-08-09 13:01:21 (77 views)
    - Did you swap to the 059 engine harness? - demet 2010-08-09 23:00:18 (74 views)
      - Is it really necessary to swap them out or can you get away without it.. - 06impreza 2010-08-10 23:28:03 (66 views)
      - Re: Did you swap to the 059 engine harness? - 06impreza 2010-08-09 23:14:33 (72 views)
        
        Don't know if the two harnesses are plug compatible. - demet 2010-08-10 10:36:56 (71 views)
    - Re: Is it worth the extra money to get the design III instead on II?? - Draleu 2010-08-09 13:19:37 (70 views)
- Should I get the 19lb ford injectors?? - 06impreza 2010-08-08 22:41:38 (72 views)

Drive shafts - jagz 2010-08-10 17:20:13 (67 views)
- Re: Drive shafts - Draleu 2010-08-10 17:21:27 (65 views)
  - Re: Drive shafts - jagz 2010-08-10 17:24:00 (59 views)
    - Re: Drive shafts - Draleu 2010-08-10 17:25:32 (61 views)
      - Re: Drive shafts - jagz 2010-08-10 17:26:35 (76 views)

hand brake cable - goms187 2010-08-07 16:01:33 (71 views)
- Got it loose with - goms187 2010-08-08 01:51:57 (77 views)
  - worked again - goms187 2010-08-08 22:17:27 (64 views)

Removing chrome sections on a Euro bumper - microcat36 2010-08-08 13:08:11 (88 views)
- Re: Removing chrome sections on a Euro bumper - Draleu 2010-08-08 14:15:59 (78 views)
  - Re: Removing chrome sections on a Euro bumper - microcat36 2010-08-08 16:04:20 (64 views)
    - Re: Removing chrome sections on a Euro bumper - Draleu 2010-08-08 17:36:41 (76 views)

overheating... Its summer in texas. I'm not surprised (long, sorry!) - albac0re 2010-08-06 18:08:41 (113 views)
- Here is your problem right here: - ejonesie22 2010-08-07 09:13:40 (113 views)
  - Re: Here is your problem right here: - albac0re 2010-08-08 17:25:56 (75 views)
- Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - Area52 2010-08-07 00:54:42 (86 views)
- Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - Hitmanx 2010-08-06 18:41:43 (83 views)
  - Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - albac0re 2010-08-06 18:57:56 (76 views)
  - Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - albac0re 2010-08-06 18:56:35 (77 views)
    - Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - Hitmanx 2010-08-06 19:04:08 (76 views)
      - Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - albac0re 2010-08-06 19:24:51 (70 views)
        
        Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - tranmkp 2010-08-07 20:42:20 (75 views)
        
        Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - albac0re 2010-08-08 15:53:45 (72 views)
        Re: overheating... Its summer in texas. I'm not surprised (long, sorry!) - Hitmanx 2010-08-07 21:13:06 (74 views)
        
        Houston (nt) - tranmkp 2010-08-07 21:24:42 (68 views)
        
        Re: Houston - Hitmanx 2010-08-07 21:46:30 (77 views)

SI board battery removal? - Hitmanx 2010-08-06 22:48:18 (92 views)
- Re: SI board battery removal? - ycs3euk 2010-08-08 14:22:03 (87 views)
- Re: SI board battery removal? - sfdon 2010-08-07 11:56:12 (82 views)
  - Re: SI board battery removal? - Hitmanx 2010-08-07 14:29:23 (73 views)
- I don't have any batteries installed- - stevebu 2010-08-07 11:02:37 (89 views)
  - Re: I don't have any batteries installed- - Hitmanx 2010-08-07 14:28:22 (69 views)

Moon Roof - tranmkp 2010-07-15 16:51:21 (109 views)
- Re: Moon Roof - Hitmanx 2010-07-19 21:48:29 (103 views)
- Re: Moon Roof - UPDATE - tranmkp 2010-07-17 11:15:10 (115 views)
  - Re: Moon Roof - New UPDATE - tranmkp 2010-08-07 20:41:29 (76 views)
  - Re: Moon Roof - microcat36 2010-07-17 18:37:13 (124 views)
    - Except the SAAB's curvature is not an exact fit. Close though. (nt) - demet 2010-07-17 19:47:48 (110 views)

85 735i Strut Retaining Nut - rgrimespe 2010-08-06 10:28:00 (78 views)
- Re: 85 735i Strut Retaining Nut - Hitmanx 2010-08-06 13:05:49 (88 views)
  - Re: 85 735i Strut Retaining Nut - rgrimespe 2010-08-06 15:31:15 (62 views)
    - Re: 85 735i Strut Retaining Nut - Hitmanx 2010-08-06 23:01:35 (59 views)
    - Re: 85 735i Strut Retaining Nut - Hitmanx 2010-08-06 17:56:47 (61 views)

B35 manifold swap - 06impreza 2010-08-06 15:19:20 (85 views)

Fuse 17 again - goms187 2010-08-05 21:21:57 (67 views)
- Solved - goms187 2010-08-06 00:52:55 (83 views)
  - That's pretty crappy work. - demet 2010-08-06 09:01:48 (68 views)

evaporative system - jumau 2010-08-04 14:51:23 (73 views)
- Re: evaporative system - Hitmanx 2010-08-05 13:47:40 (83 views)

Why was an additional battery an available option? (url) - phathome 2010-08-01 14:10:38 (102 views)
- Speaking of alternators, I think I need a better one. - jason733i 2010-08-01 16:21:44 (76 views)
  - Re: Speaking of alternators, I think I need a better one. - Hitmanx 2010-08-05 13:22:09 (72 views)
  - Re: Speaking of alternators, I think I need a better one. - Hitmanx 2010-08-01 16:54:32 (79 views)
    - Hmm... I'm going to need to do more research before I make a decision here... (nt) - jason733i 2010-08-01 19:37:22 (64 views)
- Re: Why was an additional battery an available option? - Hitmanx 2010-08-01 14:43:38 (78 views)
  - Re: Why was an additional battery an available option? - matthewt 2010-08-01 16:31:59 (84 views)
    - Re: Why was an additional battery an available option? - Hitmanx 2010-08-01 16:57:22 (90 views)
      - Re: Why was an additional battery an available option? - matthewt 2010-08-01 22:00:33 (71 views)

Tire/rim compatability? - datcord 2010-07-27 22:17:50 (133 views)
- Re: Tire/rim compatability? - ericcue 2010-07-28 02:45:22 (105 views)
- A qualified yes, you need hub adapter rings to make them work right - kff 2010-07-27 23:07:36 (121 views)
  - Re: A qualified yes, you need hub adapter rings to make them work right - datcord 2010-08-04 22:44:30 (72 views)

E32 wooden shift knob retrofit (pic) (url) - 06impreza 2010-08-01 16:52:43 (13217 views)
- Here's to do it.. Pretty simple actually... - 06impreza 2010-08-03 11:11:17 (13140 views)
- Re: E32 wooden shift knob retrofit - cpseapeacp 2010-08-02 20:36:16 (69 views)
  - univeral shift boot...still have to attach it to underside of wood.. - 06impreza 2010-08-02 21:36:17 (55 views)
- Re: E32 wooden shift knob retrofit - matthewt 2010-08-01 17:14:20 (66 views)
  - Car didn't come with it (nt) - 06impreza 2010-08-01 17:20:46 (57 views)
- Re: E32 wooden shift knob retrofit - Hitmanx 2010-08-01 16:55:48 (67 views)
  - There's a little screw hole on the front. - demet 2010-08-02 22:42:25 (61 views)
    - Re: There's a little screw hole on the front. - Hitmanx 2010-08-03 17:03:50 (55 views)
      - Yes for the cassette holder, sorry, should have been more specific. (nt) - demet 2010-08-03 19:48:08 (68 views)
        
        Re: Yes for the cassette holder, sorry, should have been more specific. - Hitmanx 2010-08-03 20:53:03 (54 views)
  - I didn't have one.. (nt) - 06impreza 2010-08-01 17:01:39 (65 views)
    - Re: I didn't have one.. - Hitmanx 2010-08-01 17:07:26 (61 views)
- Re: E32 wooden shift knob retrofit - 06impreza 2010-08-01 16:54:18 (64 views)

pics of my 1986 732ise uk spec (pic) - ycs3euk 2010-07-28 18:48:34 (177 views)
- Very nice looking car. What colour is it? - phathome 2010-07-29 15:52:47 (70 views)
  - Re: Very nice looking car. What colour is it? - ycs3euk 2010-07-29 20:55:20 (67 views)
    - looks like you got an absolute bargain. - phathome 2010-07-30 13:13:30 (73 views)
      - Re: looks like you got an absolute bargain. - ycs3euk 2010-07-31 13:38:41 (75 views)
        
        I've just visited the most amazing hoard of e23 parts - phathome 2010-08-01 10:07:57 (92 views)
        
        Re: I've just visited the most amazing hoard of e23 parts - microcat36 2010-08-02 14:34:00 (72 views)
        Nice looking car - microcat36 2010-08-01 18:59:41 (67 views)
        
        Re: Nice looking car - ycs3euk 2010-08-03 14:50:40 (69 views)

Fuse 17 - goms187 2010-07-22 18:52:31 (118 views)
- Went again - goms187 2010-07-27 00:29:49 (90 views)
  - I had a similar problem with the window fuse in my E28 - kff 2010-07-27 10:27:20 (104 views)
    - Re: Yea seems to be a list of things that use that fuse (nt) - goms187 2010-07-27 12:30:18 (84 views)
      - ok Its somewhere before the breaker cuz i had that ... - goms187 2010-07-27 19:24:21 (91 views)
        
        Re: ok found a cluster of wires by the ac comp - goms187 2010-07-27 23:50:13 (90 views)
        
        Re: ok found a cluster of wires by the ac comp (pic) - goms187 2010-07-27 23:55:54 (122 views)
        
        Re: ok found a cluster of wires by the ac comp - rgrimespe 2010-08-02 15:08:27 (69 views)
        Re: ok found a cluster of wires by the ac comp - Hitmanx 2010-07-28 08:59:11 (91 views)
        
        Re: ok found a cluster of wires by the ac comp (pic) - goms187 2010-07-28 09:45:52 (110 views)
        
        Re: ok found a cluster of wires by the ac comp - Hitmanx 2010-07-28 10:03:25 (80 views)
- Re: Fuse 17 - 06impreza 2010-07-22 21:26:09 (93 views)

Parts available from parting 81 & 85 745i (pic) - Draleu 2010-07-28 22:33:16 (191 views)
- Re: Parts available from parting 81 & 85 745i - matthewt 2010-08-01 16:35:22 (75 views)
  - Re: Parts available from parting 81 & 85 745i - Draleu 2010-08-02 12:47:01 (75 views)
- Re: Parts available from parting 81 & 85 745i - jumau 2010-08-01 13:31:56 (79 views)
  - Re: Parts available from parting 81 & 85 745i - Draleu 2010-08-02 12:53:10 (95 views)

745i Euro Front Air Dam FS - pkbinplano 2010-07-26 19:09:01 (159 views)
- Good seller! bought several things from him.. (nt) - 06impreza 2010-07-26 19:21:36 (99 views)
  - Re: Good seller! bought several things from him.. - pkbinplano 2010-07-26 20:27:03 (101 views)
- Re: 745i Euro Front Air Dam FS - pkbinplano 2010-07-26 19:11:45 (122 views)
  - Re: 745i Euro Front Air Dam FS - pkbinplano 2010-07-31 20:23:06 (81 views)

1988 M6 - jdw928 2010-07-27 12:37:57 (135 views)
- any interest in a 'show winner' 85 M6 w/ 62+k miles (url) - johnhstein, 85-M6CSi, 85 745i 2010-07-28 12:21:13 (132 views)
  - John, your M6 is absolutely stunning. How come U R selling? (url) - phathome 2010-07-29 15:50:36 (83 views)
    - V-Wings?? No I'm just a transport airplane guy ..... - johnhstein, 85-M6CSi, 85 745i 2010-07-30 12:53:22 (76 views)
    - Been a labor of love, long story there to the buyer, but - johnhstein, 85-M6CSi, 85 745i 2010-07-30 11:03:44 (93 views)
- If I was interested in an M6 I would get it from an enthusiast. (url) - demet 2010-07-27 14:54:36 (114 views)
  - Re: If I was interested in an M6 I would get it from an enthusiast. - jdw928 2010-07-27 18:50:26 (93 views)
- Re: 1988 M6 - ericcue 2010-07-27 14:38:04 (99 views)
  - Re: 1988 M6 - jdw928 2010-07-27 19:05:47 (100 views)
    - Sorry, I thought we we're talking about $20k. - demet 2010-07-27 20:20:09 (102 views)

Best place for suspension rebuild kit - 06impreza 2010-07-04 19:52:59 (167 views)
- Pile o parts! (pic) (url) - 06impreza 2010-07-29 03:07:49 (154 views)
  - Holy crap someone that checks to see what they have before - kff 2010-07-29 10:46:24 (76 views)
    - I was impressed... - demet 2010-07-29 14:47:49 (77 views)
      - Re: I was impressed... - 06impreza 2010-07-29 17:36:43 (81 views)
        
        Have you done Trailing Arm Mount Bushings before? - demet 2010-07-29 20:47:40 (58 views)
        
        Re: Have you done Trailing Arm Mount Bushings before? - 06impreza 2010-07-29 21:46:30 (77 views)
  - If you have any extras or are unsure where they go, send them my way. (nt) - demet 2010-07-29 09:04:52 (70 views)
    - Re: If you have any extras or are unsure where they go, send them my way. - 06impreza 2010-07-29 14:17:02 (69 views)
- Will you be taking pics and doing a write up for us to enjoy and learn? (nt) - phathome 2010-07-25 06:23:12 (88 views)
  - depends on my buddy's mood.. we're going to do it after hours at his shop - 06impreza 2010-07-28 17:12:01 (74 views)
- Order pretty much new everything... - 06impreza 2010-07-23 22:50:08 (105 views)
  - If you want to do all the front at one time, I recommend that - kff 2010-07-24 09:45:27 (105 views)
- The only kits out there are the ones of dubious quality. - kff 2010-07-05 07:42:08 (143 views)
  - Great list Keith - your brain is like an E23 parts computer :-) (nt) - phathome 2010-07-05 16:56:05 (118 views)
- Re: Best place for suspension rebuild kit - Hitmanx 2010-07-04 22:38:36 (123 views)
- This is one place where you really get what you pay for... - demet 2010-07-04 20:14:27 (135 views)
  - Re: This is one place where you really get what you pay for... - 06impreza 2010-07-05 03:13:38 (122 views)

Am I living in E23 heaven or hell? (pic) - phathome 2010-07-16 13:23:30 (257 views)
- Re: Am I living in E23 heaven or hell? - ycs3euk 2010-07-28 18:32:04 (77 views)
- Re: Am I living in E23 heaven or hell? - tranmkp 2010-07-16 14:42:42 (104 views)
  - If I could just have one e23 that was drivable right now, I would be in heaven! (nt) - jason733i 2010-07-17 00:56:13 (104 views)
    - Re: If I could just have one e23 that was drivable right now, I would be in heaven! - microcat36 2010-07-17 04:26:19 (101 views)
      - How many parts do you have in the hoard, enough for another car or two? - kff 2010-07-17 12:19:38 (103 views)

WTB: rear sway bar - 06impreza 2010-07-27 20:00:04 (96 views)

Exhaust parts interchanging - microcat36 2010-07-26 19:06:16 (96 views)
- Anything can be made to fit. - demet 2010-07-27 11:19:53 (93 views)
- Re: Exhaust parts interchanging - ericcue 2010-07-26 23:56:19 (99 views)
  - Re: Exhaust parts interchanging - microcat36 2010-07-27 11:50:16 (90 views)
    - Re: Exhaust parts interchanging - ericcue 2010-07-27 12:10:57 (92 views)

Fuel delivery problem HELP - bfranz 2010-07-26 20:28:29 (124 views)
- Re: Fuel delivery problem HELP - Area52 2010-07-26 23:39:38 (97 views)

1980 732i Starting to run hot?? - max732i 2010-07-23 02:50:02 (128 views)
- Might there be a tiny leak in the main rad or the heater matrix? (nt) - phathome 2010-07-25 06:25:49 (100 views)
  - Re: Might there be a tiny leak in the main rad or the heater matrix? - max732i 2010-07-26 21:01:12 (89 views)
- Re: 1980 732i Starting to run hot?? - stevebu 2010-07-23 20:08:31 (98 views)
  - Re: 1980 732i Starting to run hot?? - max732i 2010-07-26 20:59:35 (92 views)
  - Provide more information for us... - Area52 2010-07-25 18:18:36 (101 views)
    - Re: Provide more information for us... - max732i 2010-07-26 21:05:11 (92 views)
      - Buy a high flow Robertshaw.... - Area52 2010-07-26 23:33:52 (97 views)
        
        Before you run to the store... - Area52 2010-07-26 23:36:19 (94 views)

Soooo.......$5000 paint job - mattinjax 2010-07-22 18:19:43 (143 views)
- I feel your pain - vance 2010-07-26 18:34:05 (95 views)
- This is where I am now - - tranmkp 2010-07-26 12:32:08 (106 views)
- I'll do it for 2000 - stosich 2010-07-23 13:05:19 (112 views)
  - Re: I'll do it for 2000 - mattinjax 2010-07-23 20:49:30 (96 views)
    - Re: I'll do it for 2000 - stosich 2010-07-23 23:16:23 (98 views)
      - Re: I'll do it for 2000 - oldsurge 2010-07-24 12:56:38 (86 views)
        
        Hello fellow SLC fanatic - stosich 2010-07-25 20:27:06 (89 views)
- Re: Soooo.......$5000 paint job - Hitmanx 2010-07-23 02:18:17 (126 views)
  - Re: Soooo.......$5000 paint job - BigBruce 2010-07-23 18:03:57 (102 views)
    - Re: Soooo.......$5000 paint job - Hitmanx 2010-07-23 23:18:53 (104 views)
      - Re: Soooo.......$5000 paint job - BigBruce 2010-07-25 19:07:26 (104 views)
        
        That's unbelievable! I wish mine were valued at that! (nt) - jason733i 2010-07-26 20:17:19 (78 views)
    - Re: Soooo.......$5000 paint job (pic) - mattinjax 2010-07-23 20:49:05 (167 views)
      - Ohh, I really like your wheels.... (nt) - tranmkp 2010-07-26 12:23:08 (82 views)
    - Re: Soooo.......$5000 paint job (pic) - mattinjax 2010-07-23 20:47:05 (138 views)
- Most of the clear coat is gone on mine. - demet 2010-07-22 22:51:20 (101 views)
- $5000 is about right for a nice paint job - kff 2010-07-22 22:13:18 (121 views)
- Wow... I'm pretty sure that you could build your own - jason733i 2010-07-22 20:39:26 (105 views)
  - Yeah, they offered to knock a grand off - mattinjax 2010-07-22 21:22:13 (106 views)
    - the hardest parts - stosich 2010-07-25 20:31:53 (100 views)

larger A/C pulley? - stevebu 2010-07-25 08:28:52 (106 views)
- Re: larger A/C pulley? - Hitmanx 2010-07-26 17:44:44 (95 views)
- Re: larger A/C pulley? - Hitmanx 2010-07-26 09:05:27 (105 views)
- Found A/C answer: - stevebu 2010-07-25 08:38:46 (110 views)

injectors (pic) - oldsurge 2010-07-25 14:27:22 (125 views)
- Have them done right... (url) - Area52 2010-07-25 18:13:45 (114 views)
  - I SECOND!!!!!! the RC ENG link... - johnhstein, 85-M6CSi, 85 745i 2010-07-26 16:34:19 (103 views)
  - Re: Have them done right... - tranmkp 2010-07-26 12:08:23 (86 views)
  - Cruzin Performance - samsonevickis 2010-07-25 22:18:30 (99 views)
    - Re: Cruzin Performance - Hitmanx 2010-07-26 08:53:21 (95 views)
      - Re: Cruzin Performance - oldsurge 2010-07-26 10:22:25 (90 views)
        
        Re: Cruzin Performance - Hitmanx 2010-07-26 14:34:30 (85 views)

What can be swapped from late to early e23? - thradya 2010-07-26 04:32:11 (102 views)
- You can determine suitability of the parts by looking in the ETK - kff 2010-07-26 11:02:09 (105 views)

More info on 735i front brakes locking up! - sgstudioguitar 2010-07-21 15:14:47 (98 views)
- Caliper pistons should freely move. - demet 2010-07-21 16:18:51 (82 views)
  - This is a question that I've had since I've inspected my breaks before. - jason733i 2010-07-21 23:09:58 (81 views)
    - Re: This is a question that I've had since I've inspected my breaks before. - derrith 2010-07-22 02:17:51 (87 views)
      - What about cross drilled rotors? Are they any better than standard rotors? (nt) - jason733i 2010-07-22 20:41:50 (84 views)
        
        Re: What about cross drilled rotors? Are they any better than standard rotors? - derrith 2010-07-23 04:01:32 (96 views)
        
        What would I need to rebuild the calipers? ... - jason733i 2010-07-23 10:37:41 (85 views)
        
        Re: What would I need to rebuild the calipers? ... - derrith 2010-07-24 16:35:51 (90 views)
        
        That sounds like a relatively easy weekend project. Thanks! (nt) - jason733i 2010-07-25 15:36:05 (94 views)
        
        Re: That sounds like a relatively easy weekend project. Thanks! - derrith 2010-07-25 18:25:31 (85 views)
  - Re: Caliper pistons should freely move. - sgstudioguitar 2010-07-21 16:51:53 (97 views)
    - I know what you mean... - demet 2010-07-21 18:07:21 (90 views)
      - Re: I know what you mean... - sgstudioguitar 2010-07-21 18:42:44 (96 views)
        
        Re: I know what you mean... - derrith 2010-07-22 02:21:20 (88 views)
        Two methods that I've used ... - demet 2010-07-21 19:47:24 (95 views)
        
        Re: Two methods that I've used ... - brkngmd 2010-07-23 09:31:06 (95 views)

85 735 need locations of the starter relay and window relay (nt) - brkngmd 2010-07-23 09:33:45 (107 views)
- ETM is your friend here, it has wire colors and locations. - demet 2010-07-24 09:17:36 (98 views)
  - Re: ETM is your friend here, it has wire colors and locations. - brkngmd 2010-07-24 13:26:26 (87 views)
    - For those things yes. - demet 2010-07-24 15:14:37 (99 views)

Free stuff or garbage - 06impreza 2010-07-14 16:13:12 (147 views)
- OOOOOOOOOO do you have a working condsensor? - jason733i 2010-07-15 10:19:37 (100 views)
  - Re: OOOOOOOOOO do you have a working condsensor? - Hitmanx 2010-07-15 17:53:01 (94 views)
    - If double pass with large tubes means that it will fit... - jason733i 2010-07-21 23:22:37 (102 views)
      - Re: If double pass with large tubes means that it will fit... - Hitmanx 2010-07-22 23:51:04 (91 views)
  - Re: OOOOOOOOOO do you have a working condsensor? - 06impreza 2010-07-15 12:01:01 (93 views)
    - Awwwwwwwwwwwwwww - jason733i 2010-07-15 13:05:24 (97 views)
      - Re: Awwwwwwwwwwwwwww - 06impreza 2010-07-15 17:22:02 (76 views)

temperature sensors troubleshooting - brkngmd 2010-07-15 20:28:19 (117 views)
- FWIW.. chiming in a little late... but... - johnhstein, 85-M6CSi, 85 745i 2010-07-20 15:58:09 (91 views)
  - Re: FWIW.. chiming in a little late... but... - brkngmd 2010-07-21 23:37:35 (87 views)
- For which car? (nt) - demet 2010-07-15 22:13:17 (86 views)
  - Re: For which car? - brkngmd 2010-07-16 06:19:21 (94 views)
    - That pic won't help on the 745. - demet 2010-07-16 08:45:42 (95 views)
      - Re: That pic won't help on the 745. - brkngmd 2010-07-17 21:37:43 (103 views)
        
        Pretty sure you can get the coolant temp sensor for about $20. - demet 2010-07-18 00:05:00 (100 views)
        
        Re: Pretty sure you can get the coolant temp sensor for about $20. - brkngmd 2010-07-19 09:18:38 (106 views)
        
        What color is the sensor? (pic) - demet 2010-07-19 19:42:36 (127 views)
        
        Re: What color is the sensor? - brkngmd 2010-07-21 23:43:00 (81 views)
        
        Sent you an email (nt) - demet 2010-07-22 08:40:17 (90 views)

FS NIB Brembo rear rotors - derrith 2010-07-20 02:51:10 (100 views)
- I'll take them. (nt) - demet 2010-07-20 09:08:40 (90 views)
  - Sold! - derrith 2010-07-20 12:10:03 (86 views)

Updated AC condenser and compressor pics (pic) (url) - Hitmanx 2010-07-11 20:22:05 (232 views)
- Re: Updated AC condenser and compressor pics - jabadoo 2010-07-20 04:22:38 (84 views)
- I will be needing a condensor soon. Now that I have been wrapping up my to do - jason733i 2010-07-11 23:58:19 (103 views)
- Hey thanks for that. - demet 2010-07-11 22:05:53 (102 views)
  - Re: Hey thanks for that. - Hitmanx 2010-07-11 22:22:20 (149 views)
    - Re: Hey thanks for that. - derrith 2010-07-20 04:55:53 (77 views)
    - Just chiming in... - Area52 2010-07-12 08:19:53 (108 views)
      - Bunch of questions... - demet 2010-07-13 14:39:17 (99 views)
        
        Re: Bunch of questions... - Hitmanx 2010-07-13 19:41:35 (98 views)
        
        Ok thanks... - demet 2010-07-13 20:37:13 (93 views)
        
        Re: Ok thanks... - Hitmanx 2010-07-13 21:42:56 (96 views)

help fund my suspension rebuild.. buy stuff! - 06impreza 2010-07-15 17:56:17 (127 views)
- Re: help fund my suspension rebuild.. buy stuff! - brkngmd 2010-07-19 08:53:02 (107 views)
- Re: help fund my suspension rebuild.. buy stuff! (pic) (url) - 06impreza 2010-07-18 18:43:15 (128 views)
- Re: help fund my suspension rebuild.. buy stuff! (pic) (url) - 06impreza 2010-07-16 01:51:50 (113 views)
- Re: help fund my suspension rebuild.. buy stuff! - Hitmanx 2010-07-15 18:01:59 (89 views)
  - Re: help fund my suspension rebuild.. buy stuff! - 06impreza 2010-07-15 18:42:31 (89 views)

Need a new paint job (pic) - mattinjax 2010-07-17 20:34:46 (183 views)
- Re: Need a new paint job (pic) - mattinjax 2010-07-18 21:47:38 (136 views)
  - Re: Need a new paint job (pic) - mattinjax 2010-07-18 21:48:22 (130 views)
- Stunning car, is that Cosmos Blue? What make and size are those rims? (nt) - phathome 2010-07-18 03:19:45 (122 views)

85 735i front brakes completely locking up? I need help!! - sgstudioguitar 2010-07-17 14:42:21 (111 views)
- Re: 85 735i front brakes completely locking up? I need help!! - Mad Eyes 2010-07-17 21:05:33 (111 views)
  - Re: 85 735i front brakes completely locking up? I need help!! - sgstudioguitar 2010-07-17 22:34:05 (96 views)
- Brake switches won't lock up the brakes. - demet 2010-07-17 19:46:23 (92 views)
  - Re: Brake switches won't lock up the brakes. - sgstudioguitar 2010-07-17 22:32:22 (96 views)

executive (Buffalo) interior available, like new - tranmkp 2010-07-16 14:48:12 (130 views)
- Re: executive (Buffalo) interior available, like new - tranmkp 2010-07-17 11:30:16 (109 views)
  - Re: executive (Buffalo) interior available, like new - derrith 2010-07-17 18:22:59 (100 views)
- Re: executive (Buffalo) interior available, like new - mattinjax 2010-07-17 09:13:19 (97 views)
- Re: executive (Buffalo) interior available, like new - Hitmanx 2010-07-16 17:56:17 (99 views)
- Re: executive (Buffalo) interior available, like new - derrith 2010-07-16 15:57:01 (114 views)

What shocks to use with H&R springs? What springs diameter? - thradya 2010-07-16 09:58:31 (105 views)
- Re: What shocks to use with H&R springs? What springs diameter? - Hitmanx 2010-07-16 18:10:48 (113 views)

Which short shifter? - Hitmanx 2010-07-13 22:57:26 (107 views)
- Re: Which short shifter? - derrith 2010-07-15 10:19:59 (83 views)
  - Re: Which short shifter? - Hitmanx 2010-07-15 18:01:19 (84 views)
    - Re: Which short shifter? - derrith 2010-07-15 21:25:33 (79 views)
      - Re: Which short shifter? - Hitmanx 2010-07-16 01:51:15 (88 views)
      - Thanks. I didn't know about this one. - demet 2010-07-15 22:09:12 (94 views)
        
        Re: Thanks. I didn't know about this one. - derrith 2010-07-15 23:38:06 (90 views)

Who was it that suggested using rubber cement - clemsoncpa 2010-07-15 00:16:17 (94 views)
- It wasn't rubber cement, it was silicon adhesive and plastic shopping bags. - jason733i 2010-07-15 10:16:36 (100 views)
  - Thanks (nt) - clemsoncpa 2010-07-15 18:59:38 (81 views)
    - Also, I don't want to take credit for the idea, I forget who's it was, but it - jason733i 2010-07-15 22:16:32 (90 views)

Good news, Bad News - BigBruce 2010-07-15 20:55:24 (101 views)
- I've got the cluster from the 85 745. - demet 2010-07-15 22:12:21 (96 views)

NO Afilliation - mattinjax 2010-07-12 22:54:37 (123 views)
- Re: NO Afilliation - Hitmanx 2010-07-12 23:45:56 (113 views)

Alignment? - mattinjax 2010-07-12 21:23:00 (99 views)
- Re: Alignment? - Area52 2010-07-12 22:23:59 (104 views)
- Re: Alignment? - Hitmanx 2010-07-12 22:14:15 (107 views)
  - Re: Alignment? - mattinjax 2010-07-12 22:52:02 (89 views)

Window Motor - fiedler1999 2010-07-11 15:26:39 (102 views)
- Re: Window Motor - fiedler1999 2010-07-11 20:54:11 (92 views)
- Re: Window Motor - clemsoncpa 2010-07-11 16:01:15 (109 views)

trying to install performance chip in 83 733i - dans733i 2010-07-07 10:37:40 (144 views)
- Re: trying to install performance chip in 83 733i - derrith 2010-07-11 18:42:01 (121 views)
  - Re: trying to install performance chip in 83 733i - Hitmanx 2010-07-11 19:15:18 (125 views)
- Re: trying to install performance chip in 83 733i - Hitmanx 2010-07-07 14:58:04 (155 views)

Damaged E23 rear shock removal (pic) - unvago 2010-07-03 12:27:50 (231 views)
- Re: Damaged E23 rear shock removal - unvago 2010-07-10 22:10:16 (98 views)
- Re: Damaged E23 rear shock removal - unvago 2010-07-05 11:10:00 (114 views)
- Re: Damaged E23 rear shock removal - stevebu 2010-07-04 08:17:32 (113 views)
  - Re: Damaged E23 rear shock removal - unvago 2010-07-04 10:14:13 (115 views)
    - I would suspect that the mount failed. - demet 2010-07-04 19:51:13 (113 views)
- Were you driving when it happened? (nt) - phathome 2010-07-04 03:28:27 (113 views)
  - Re: Were you driving when it happened? - unvago 2010-07-04 10:08:07 (105 views)
    - Are you treating the old girl to new rear springs and shocks? (nt) - phathome 2010-07-04 12:04:33 (108 views)
      - Re: Are you treating the old girl to new rear springs and shocks? - unvago 2010-07-05 00:22:18 (104 views)
        
        some parts numbers to work with (url) - phathome 2010-07-05 16:54:06 (122 views)
        
        Buy the Meyle HD Shock Mounts (nt) - Area52 2010-07-11 01:19:19 (88 views)
- Ouch - clemsoncpa 2010-07-03 16:52:36 (124 views)

Aux Fan Diagnosed? - stosich 2010-07-06 20:54:40 (130 views)
- Re: Aux Fan Diagnosed? - Hitmanx 2010-07-07 15:17:12 (117 views)
  - Yes it should always run even when the compressor cycles off. - demet 2010-07-07 15:29:21 (110 views)
    - Re: Yes it should always run even when the compressor cycles off. - Hitmanx 2010-07-07 16:49:44 (106 views)
      - Maybe it was too complicated for them to do it the other way? (nt) - demet 2010-07-07 23:39:14 (105 views)
        
        Later designs .... (url) - johnhstein, 85-M6CSi, 85 745i 2010-07-08 07:11:04 (110 views)
        
        Re: Later designs .... - Hitmanx 2010-07-08 15:24:36 (108 views)
- simple trouble shooting..... - johnhstein, 85-M6CSi, 85 745i 2010-07-07 06:42:35 (117 views)
  - Re: simple trouble shooting..... - stosich 2010-07-07 10:52:36 (94 views)
- Jump the resistor. Does it run? (nt) - demet 2010-07-06 21:38:22 (110 views)
  - Solved it! - stosich 2010-07-07 23:55:37 (111 views)
  - Re: Jump the resistor. Does it run? - stosich 2010-07-06 22:10:11 (117 views)

Dialing in AFM - Hitmanx 2010-07-04 16:04:52 (147 views)
- Not that difficult with a good 3-wire O2 sensor. (url) - demet 2010-07-04 19:26:46 (134 views)
  - Here's my AFM baseline voltage at idle... (pic) - demet 2010-07-04 19:55:20 (166 views)
    - Re: Here's my AFM baseline voltage at idle... - Hitmanx 2010-07-05 00:35:15 (114 views)
      - Re: Here's my AFM baseline voltage at idle... - Area52 2010-07-05 13:25:04 (123 views)
        
        the non-turbo Motronics are .... - johnhstein, 85-M6CSi, 85 745i 2010-07-08 07:14:02 (118 views)
        Re: Here's my AFM baseline voltage at idle... - Hitmanx 2010-07-05 16:48:07 (113 views)
        
        I didn't tell you to install a 4-wire. I just said I liked the 4-wire better. (nt) - demet 2010-07-05 17:46:53 (125 views)
        
        Re: I didn't tell you to install a 4-wire. I just said I liked the 4-wire better. - Hitmanx 2010-07-05 18:33:04 (106 views)

Evaporator questions / e23 engine swap - jabadoo 2010-07-07 04:18:11 (145 views)
- Re: Evaporator questions / e23 engine swap - Hitmanx 2010-07-07 15:02:52 (123 views)
  - Re: Evaporator questions / e23 engine swap - jabadoo 2010-07-07 21:43:36 (105 views)
  - I would appreciate pics. Thanks. (nt) - demet 2010-07-07 15:30:53 (114 views)

Duetsche Classic car show July 10th - 06impreza 2010-07-05 22:17:11 (147 views)
- clickable link in here (url) - kff 2010-07-06 09:57:00 (136 views)
  - Re: clickable link in here - 06impreza 2010-07-06 11:15:28 (119 views)

735i exhaust availability in the UK - microcat36 2010-07-05 06:57:53 (126 views)

82 754i - unvago 2010-07-04 10:16:18 (122 views)
- Re: 82 754i - Hitmanx 2010-07-04 15:05:20 (137 views)
- 754i eh, that will be the 5.4 Chevy V8 conversion :-) (nt) - phathome 2010-07-04 12:06:09 (129 views)

Parting out TWO E23 81 & 85 745i and One E32 1990 735i - Draleu 2010-07-03 15:41:59 (151 views)
- Re: Parting out TWO E23 81 & 85 745i and One E32 1990 735i - unvago 2010-07-03 21:36:57 (116 views)
  - Re: Parting out TWO E23 81 & 85 745i and One E32 1990 735i - unvago 2010-07-03 21:37:54 (117 views)
- Re: Parting out TWO E23 81 & 85 745i and One E32 1990 735i - Hitmanx 2010-07-03 18:02:59 (148 views)